Enterprise-class quality of service The Cisco 2960-Plus Series Switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Catalyst Smart Operations Cisco Catalyst Smart Operations is A superbly comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying Smart Operations tools reduces the time & effort required to operate the network & lowers total cost of ownership (TCO). Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Energy Wise technology is included on all Cisco Catalyst 2960-Plus Series Switches. Power over Ethernet Cisco Catalyst 2960-Plus switches support IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus Series Switches offer a superior CLI for detailed configuration & administration. 2960-Plus switches are also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960-Plus 24PC-S
- switch
- 24 ports
- Managed
- rack-mountable
- Device Type: Switch
- 24 ports
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 24 x 10/ 100 (Po E) + 2 x combo Gigabit SFP
- Power Over Ethernet (Po E): Po E
- Po E Budget: 370 W
- Performance: Switching capacity:16 Gbps Forwarding performance (64-byte packet size):6.5 Mpps
- Capacity: Active VLANs:64
- Jumbo Frame Support: 9018 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, CLI
- Features Full duplex capability, BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (Qo S), Dynamic ARP Inspection (DAI), Cisco Energy Wise technology, Shaped Round Robin (SRR), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Management Information Base (MIB), Class of Service (Co S), Diff Serv Code Point (DSCP) support
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP) Power AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 45 cm x 33.2 cm x 4.4 cm
- Weight: 5.4kg
- Manufacturer Warranty: Limited lifetime warranty





















...

The Cisco Catalyst 2960-Plus series switches are fixed-configuration Fast Ethernet switches that provide enterprise-class Layer 2 switching for branch offices, conventional workspaces, and infrastructure applications. They enable reliable & secure operations with lower total cost of ownership through a range of Cisco IOS software features, including Cisco Catalyst Smart Operations. Features Enterprise-class quality of service The Cisco 2960-Plus series switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Catalyst Smart Operations Cisco Catalyst Smart Operations is A superbly comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying Smart Operations tools reduces the time & effort required to operate the network & lowers total cost of ownership (TCO). Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Energy Wise technology is included on all Cisco Catalyst 2960-Plus Series Switches. Power over Ethernet Cisco Catalyst 2960-Plus switches support IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus series switches offer a superior CLI for detailed configuration & administration. 2960-Plus switches are also supported in the full range of Cisco network management solutions. ...

Enterprise-class quality of service The Cisco 2960-Plus series switch offers intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Power over Ethernet Cisco Catalyst 2960-Plus switch supports IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus series switch offers a superior CLI for detailed configuration & administration. 2960-Plus switch is also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960-Plus 48PST-L
- switch
- 48 ports
- Managed
- rack-mountable
- Device Type: Switch
- 48 ports
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 48 x 10/ 100 (Po E) + 2 x Gigabit SFP + 2 x 10/ 100/ 1000
- Power Over Ethernet (Po E): Po E
- Po E Budget: 370W
- Performance: Switching capacity:16 Gbps Forwarding performance (64-byte packet size):13.1 Mpps
- Capacity: Active VLANs:255
- Jumbo Frame Support: 9018 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP
-

Features: Layer 2 switching, auto-sensing per device, dynamic IP address assignment, DHCP support, power over Ethernet (Po E), auto-negotiation, BOOTP support, ARP support, load balancing, VLAN support, auto-uplink (auto MDI/ MDI-X), IGMP snooping, Syslog support, Diff Serv support, Broadcast Storm Control, IPv 6 support, Multicast Storm Control, Unicast Storm Control, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Dynamic Trunking Protocol (DTP) support, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), Link Aggregation Control Protocol (LACP), Port Security, MAC Address Notification, Remote Switch Port Analyzer (RSPAN)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ab (LLDP)
- Power: AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 45 cm x 33.2 cm x 4.4 cm
- Weight: 5.4kg
- Manufacturer Warranty: Limited lifetime warranty
























...

Enterprise-class quality of service The Cisco 2960-Plus Series Switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Catalyst Smart Operations Cisco Catalyst Smart Operations is A superbly comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying Smart Operations tools reduces the time & effort required to operate the network & lowers total cost of ownership (TCO). Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Energy Wise technology is included on all Cisco Catalyst 2960-Plus Series Switches. Power over Ethernet Cisco Catalyst 2960-Plus switches support IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus Series Switches offer a superior CLI for detailed configuration & administration. 2960-Plus switches are also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960-Plus 48PST-S
- switch
- 48 ports
- Managed
- rack-mountable
- Device Type: Switch
- 48 ports
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 48 x 10/ 100 (Po E) + 2 x Gigabit SFP + 2 x 10/ 100/ 1000
- Power Over Ethernet (Po E): Po E
- Po E Budget: 370W
- Performance: Switching capacity:16 Gbps Forwarding performance (64-byte packet size):13.1 Mpps
- Capacity: Active VLANs:64
- Jumbo Frame Support: 9018 bytes
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, CLI Features Full duplex capability, BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, Rapid Spanning Tree Protocol (RSTP) support, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (Qo S), Dynamic ARP Inspection (DAI), Cisco Energy Wise technology, Shaped Round Robin (SRR), LLDP support, DHCP relay, Link Aggregation Control Protocol (LACP), MAC Address Notification, Management Information Base (MIB), Class of Service (Co S), Diff Serv Code Point (DSCP) support
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) Power AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 45 cm x 33.2 cm x 4.4 cm
- Weight: 5.4kg
- Manufacturer Warranty: Limited lifetime warranty




















...

Enterprise-class quality of service The Cisco 2960-Plus Series Switches offer intelligent traffic management that keeps everything flowing smoothly. Flexible mechanisms for marking, classification, and scheduling deliver superior performance for data, voice, and video traffic, all at wire speed. Cisco Catalyst Smart Operations Cisco Catalyst Smart Operations is A superbly comprehensive set of capabilities that simplify LAN planning, deployment, monitoring, and troubleshooting. Deploying Smart Operations tools reduces the time & effort required to operate the network & lowers total cost of ownership (TCO). Cisco Energy Wise Cisco Energy Wise empowers IT teams to measure & manage the power consumed by devices connected to the network, providing measurable energy savings & reduced greenhouse gas emissions. Energy Wise policies can be used to control the power consumed by Po E-powered endpoints, desktop & data-center IT equipment, and a wide range of building infrastructure. Energy Wise technology is included on all Cisco Catalyst 2960-Plus Series Switches. Power over Ethernet Cisco Catalyst 2960-Plus switches support IEEE 802.3af Power over Ethernet (Po E) to deliver lower total cost of ownership for deployments that incorporate Cisco IP phones, Cisco Aironet wireless access points, or other standards-compliant Po E end devices. Po E removes the need to supply wall power to Po E-enabled devices & eliminates the cost of adding electrical cabling & circuits that would otherwise be necessary in IP phone & WLAN deployments. Network management The Cisco Catalyst 2960-Plus Series Switches offer a superior CLI for detailed configuration & administration. 2960-Plus switches are also supported in the full range of Cisco network management solutions. Main Specifications
- Product Description: Cisco Catalyst 2960-Plus 48TC-S
- switch
- 48 ports
- Managed
- rack-mountable
- Device Type: Switch
- 48 ports
- Managed
- Enclosure Type: Rack-mountable 1U
- Subtype: Fast Ethernet
- Ports: 48 x 10/ 100 + 2 x combo Gigabit SFP
- Performance: Switching capacity:16 Gbps Forwarding performance (64-byte packet size):10.1 Mpps
- Capacity: Active VLANs:64
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: IGMPv 3
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI Features Layer 2 switching, DHCP support, BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, full duplex mode, Spanning Tree Protocol (STP) support, Port Aggregation Protocol (PAg P) support, Trivial File Transfer Protocol (TFTP) support, Quality of Service (Qo S), Dynamic ARP Inspection (DAI), Cisco Energy Wise technology, Shaped Round Robin (SRR), LLDP support, DHCP relay, Port Security, Management Information Base (MIB), Class of Service (Co S), FTP client, Diff Serv Code Point (DSCP) support, IGMP filtering, Storm Control, IP source guard, Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.1ab (LLDP) Power AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 45 cm x 24.2 cm x 4.4 cm
- Weight: 3.6kg
- Manufacturer Warranty: Limited lifetime warranty



















...

The Cisco Catalyst 2960S-48LPS-L Ethernet Switch is the leading Layer 2 edge, providing enhanced ease of use, highly secure business operations, enhanced sustainability, & a borderless network experience. The Cisco Catalyst 2960-S Switch

Includes:: new Cisco Flex Stack switch stacking capability with 1 & 10 Gigabit connectivity, & Power over Ethernet Plus (Po E+) with the Cisco Catalyst 2960-S Switch offering fast Ethernet access connectivity & Po E capabilities. The Cisco Catalyst 2960-S is fixed-configuration access switches designed for enterprise, mid-market, & branch office networks to provide lower total cost of ownership.

...

The Cisco Catalyst 2960-C series compact switch is a small form-factor Fast Ethernet & Gigabit Ethernet switch designed for deployments outside the wiring closet. Enterprise & commercial customers can deliver advanced security services, unified communications, wireless, IP video cameras, & other applications for the office workspace, micro branch office, classroom, cruise ship, & other wiring-constrained environments. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Catalyst Compact Switches easily expand your Catalyst switching infrastructure outside the wiring closet to enable workspaces, extend wireless LANs, and connect Po E devices. These fan-less, small form-factor switches are ideal for space-constrained deployments where multiple cable runs would be challenging. The Cisco Catalyst 2960-CX compact switches help optimize network deployments. These Gigabit Ethernet (Gb E) managed switches are ideal for high-speed data connectivity, Wi-Fi backhaul, and Power over Ethernet (Po E) connectivity in places where space is at a premium. With a single copper or fiber cable from the wiring closet, Catalyst compact switches enable IP connectivity for devices such as IP phones, wireless access points, surveillance cameras, PCs, and video endpoints. With their quiet, fanless design & compact footprint, these switches offer flexible mounting options & open up a variety of network design & connectivity options. Use them in offices, classrooms, hotels, retail stores, and other enterprise & branch locations. The setup allows for shorter cable runs from the compact switches, allowing for flexibility in space redesign & growth as the devices join the network
- this eliminating the need for expensive & inflexible cabling infrastructure. Main Specifications
- Product Description: Cisco Catalyst 2960CX-8PC-L
- switch
- 8 ports
- Managed
- desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch
- 8 ports
- Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 8 x 10/ 100/ 1000 (Po E+) + 2 x SFP + 2 x 10/ 100/ 1000
- Power Over Ethernet (Po E): Po E+
- Po E Budget: 124W
- Performance: Forwarding performance:12 Gbps Forwarding performance (64-byte packet size):17.9 Mpps
- Capacity: Virtual interfaces (VLANs):255
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
-

Features: BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (Co S), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az
- Power:AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 26.9 cm x 23.8 cm x 4.44 cm
- Weight: 2.27kg
- Manufacturer Warranty: Limited lifetime warranty


























...

Small form factor;fan-less design;silent operation The switch can be used in open workspaces & other areas that cant tolerate equipment noise & where multiple cable runs could be difficult, expensive, and intrusive. Flexible mounting options The switch can be mounted on the wall, under a desk, rack, DIN rail, or practically anywhere theyre needed. 10-Gigabit SFP+ uplinks Accommodates business growth & increased traffic, such as aggregate upstream gigabit traffic loads from 802.11ac Wi-Fi access points. Main Specifications
- Product Description: Cisco Catalyst 2960CX-8TC-L
- switch
- 8 ports
- Managed
- desktop, rack-mountable, DIN rail mountable, wall-mountable
- Device Type: Switch
- 8 ports
- Managed
- Enclosure Type: Desktop, rack-mountable, DIN rail mountable, wall-mountable 1U
- Subtype: Gigabit Ethernet
- Ports: 8 x 10/ 100/ 1000 + 2 x SFP + 2 x 10/ 100/ 1000 (uplink)
- Performance: Forwarding performance:12 Gbps Forwarding performance (64-byte packet size):17.9 Mpps
- Capacity: Virtual interfaces (VLANs):1023
- Jumbo Frame Support: 9018 bytes
- Routing Protocol: RIP-1, RIP-2, static IP routing
- Remote Management Protocol: SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, TFTP, CLI
-

Features: BOOTP support, ARP support, VLAN support, Syslog support, Diff Serv support, IPv 6 support, Spanning Tree Protocol (STP) support, DHCP snooping, Port Aggregation Protocol (PAg P) support, Access Control List (ACL) support, Quality of Service (Qo S), fanless, Shaped Round Robin (SRR), MAC Address Notification, Remote Switch Port Analyzer (RSPAN), Energy Efficient Ethernet, Multicast VLAN Registration (MVR), Class of Service (Co S), Weighted Tail Drop (WTD)
- Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3ah, IEEE 802.1ae, IEEE 802.1ab (LLDP), IEEE 802.3az Power AC 120/ 230 V (50/ 60 Hz )
- Dimensions: (Wx Dx H) 26.9 cm x 21.3 cm x 4.44 cm
- Weight: 1.72kg
- Manufacturer Warranty: Limited lifetime warranty






















...

Cisco Catalyst 2960 Series Intelligent Ethernet Switches are a new family of fixed-configuration standalone devices that provide desktop Fast Ethernet & Gigabit Ethernet connectivity, enabling enhanced LAN services for entry-level enterprise, mid-market, & branch office networks. The Catalyst 2960 Series offers integrated security, including network admission control (NAC), advanced quality of service (Qo S), & resiliency to deliver intelligent services for the network edge. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...