The Cisco ASR 1000 Series Fixed Ethernet Line Card is a fixed-port Ethernet line card for the Cisco ASR 1000 Series Aggregation Services Routers. The line card is capable of 40-Gbps full-duplex traffic forwarding using a fixed-port interface design. This line card has twenty 1 Gigabit Ethernet ports & two 10 Gigabit Ethernet ports. The Small Form-Factor Pluggable (SFP) & 10-Gbps SFP (XFP) modules allow you to configure the line card for different media types & different optical requirements, as available. The line cards have one power LED, one line-card status LED, and 22 port or link-status LEDs. The Cisco ASR 1000 Series Fixed Ethernet Line Cards have the twenty 1 Gigabit Ethernet & two 10 Gigabit Ethernet ports built in, allowing the Cisco ASR 1000 Series Routers to achieve greater Ethernet density & a lower price per port. The Ethernet line card takes the slot of the SIP with the twenty 1 Gigabit Ethernet & two 10 Gigabit Ethernet ports built in. Carrier Ethernet, IEEE Standard 1588, Sync E (Sync E), & ITU-T Y.1731 Low price per port Rich Ethernet Layer 2, Layer 3, IP, IPv 6, & Multiprotocol Label Switching (MPLS) packet-processing capabilities as previously provided on Cisco ASR 1000 platforms Ingress & egress Qo S as previously provided on Cisco ASR 1000 platforms Egress queuing capability as previously provided on Cisco ASR 1000 platforms High- & low-priority lanes to Cisco ASR 1000 Series Embedded Services Processor (ESP) for high priority, low-latency forwarding