By using system components manufactured by Cisco, you are assured a higher level of reliability & are less likely to experience compatibility problems. Cisco testing is among the most rigorous in the industry so you can be confident that you're receiving the highest quality & dependability. ...

Cisco AC Power Module Version 2 Power supply redundant (plug-in module) AC 200-240 V 3000 Watt for ASR 9006 with PEM Version 2, 9010 with PEM Version 2 ...

The power supplies connect directly to the system through connectors attached to the baseboard through cables. One connector is on the baseboard for each power supply. AC input is through an IEC connector mounted on the power supply front panel. Specifications Device Type Power supply
- hot-plug
- plug-in module Back to Front Air Flow Weight 1kg Power Capacity 400 Watt Designed For Nexus 2148T Fabric Extender, 2224TF Fabric Extender, 2224TP Fabric Extender, 2232PP 10GE Fabric Extender, 2232TM 10GBASE-T Fabric Extender, 2248TP Fabric Extender, 2248TP GE Fabric Extender

...

The Broadcom Net Xtreme II 5709 Gigabit Server Adapter is able to simultaneously perform accelerated networking & storage networking on standard Ethernet. The Net Xtreme II is a family of Converged Network Interface Controllers (C-NICs) with superior design. These devices also support teaming & failover to improve network application performance & provide server redundancy. ...

OVERVIEW The Broadcom Net Xtreme II 5709 Gigabit Server Adapter is a new class of Gigabit Ethernet (Gb E) adapter able to simultaneously perform accelerated networking & storage networking on standard Ethernet. The Net Xtreme II is a family of Converged Network Interface Controllers (C-NICs) with superior design. These devices also support teaming & failover to improve network application performance & provide server redundancy. PERFORMANCE & RELIABILITY Broadcom validates its network interface cards over a variety of operating systems & platforms ensuring compatibility & interoperability. This Gigabit Ethernet adapter card takes full advantage of the PCI Express bus architecture to maximize network throughput. Teaming enables Smart Load Balancing to help increase throughput & fault tolerance when multiple adapters are configured to work together as a team to share traffic & provide data reliability with failover. ISCSI STORAGE SUPPORT Host Bus Adapter (HBA) functionality on the Net Xtreme II 5709 Adapter supports Accelerated i SCSI. This converges block storage & network processing over standard TCP infrastructure, eliminating the need for a separate storage adapter & cabling while providing fibre channel comparable performance & reliability at a fraction of the cost. There is no need to maintain a separate storage infrastructure & no need for additional training. ADVANCED TECHNOLOGY The Net Xtreme II 5709 Adapter features TCP/IP Offload Engine (TOE) technology for Windows which reduces the server CPU utilization & improves application performance. TOE offloads the TCP protocol processing from the server CPU onto the server adapter. This preserves valuable CPU cycles for applications processing & improves overall server performance & network efficiency. Receive Side Scaling (RSS) also enables packet receive processing to scale with the number of available processors. MANAGING with complete confidence The Net Xtreme II 5709 Adapter helps preserve your existing networking environment: operating systems, network administration tools, core cabling, personnel training, etc., while improving server efficiency & networking application performance. Major operating systems are supported, including Microsoft Windows & Linux, & the TOE & RSS functionality is fully integrated in the Microsoft Server 2003 Scalable Networking Pack. In addition, the Broadcom Advanced Control Suite 3 (BACS3) provides an unprecedented level of governance across your entire network, enabling detailed tests, analyses, & diagnostics to be performed for each network adaptor installed in your system. In addition, BACS3

Includes:: utilities to help you configure VLANs & set up teams for link aggregation, Smart Load Balancing & Failover, Generic Trunking, & more. Highlights • TCP/IP Offload Engine (TOE) for Windows, significantly reduces CPU utilization • Optimizes server efficiency & improves network performance • Total Ethernet compatibility: standard TCP/IP implementation • Teaming & failover ensure Smart Load Balancing & data availability • Host Bus Adapter (HBA) functionality supporting Accelerated i SCSI • Auto negotiation of speed ensures highest available throughput. FEATURES Controller - Broadcom BCM5709C Data Path - Four lanes (x 4) Bus Architecture - PCI Express Form Factor - Low profile 5.8 x 2.5in. Data Rate - Auto-Negotiate 10/100/1000 Mbps Ethernet Ports - Four On-Chip Memory - 92 KB Cabling - Category 5 Connector - RJ-45 Maximum Cable Length - 100 meters TCP/IP Offload Engine (TOE) Host Bus Adapter functionality for i SCSI support Receive Side Scaling TCP, IP, UDP Checksum TCP Segmentation 802.1q VLAN Tagging IPMI management pass-through capability Link Aggregation & Load Balancing Heterogeneous Teaming Jumbo Frames IPv 4 & IPv 6 i SCSI Offload support

...

The Cisco Aironet 1040 Series Access Point is an enterprise-class, entry-level 802.11n access point designed to address the wireless connectivity needs of small & medium-sized enterprises. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 1040 Series Access Point is an enterprise-class, entry-level 802.11n access point designed to address the wireless connectivity needs of small & medium-sized enterprises. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 1040 Series Access Point is an enterprise-class, entry-level 802.11n access point designed to address the wireless connectivity needs of small & medium-sized enterprises. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Cisco Aironet 1130AG Series IEEE 802.11a/b/g Access Point is a fixed-configuration, dual-band access point. Built in to the access point are two radios each with diversity antennas that provide omni-directional coverage. The Cisco Aironet 1130AG supports local power as well as Power over Ethernet (Po E), either by an IEEE 802.3af-compliant Power Sourcing Equipment (PSE) device, such as a switch, or by a device capable of providing 12.95W to a Powered Device (PD) & compliant with Cisco Inline Power. The Cisco Aironet 1130AG Series

Includes:: a console port for management.

...

Cisco Aironet 1130AG Series IEEE 802.11a/b/g access points provide high-capacity, high-security, enterprise-class features in an unobtrusive, office-class design, delivering WLAN access with the lowest total cost of ownership. With high-performing dual IEEE 802.11a & 802.11g radios, the Cisco Aironet 1130AG Series provides a combined capacity of up to 108 Mbps to meet the needs of growing WLANs. Hardware-assisted Advanced Encryption Standard (AES) or temporal key integrity protocol (TKIP) encryption provides uncompromised support for interoperable IEEE 802.11i, Wi-Fi Protected Access 2 (WPA2) or WPA security. The Cisco Aironet 1130AG Series uses radio & network management features for simplified deployment, along with built-in omnidirectional antennas that provide robust & predictable WLAN coverage for offices & similar RF environments. The competitively priced Cisco Aironet 1130AG Series is ready to install & easy to manage, reducing the cost of deployment & ongoing maintenance. The Cisco Aironet 1130AG Series is available in two versions: unified or autonomous. Unified access points operate with the Lightweight Access Point Protocol (LWAPP) & work in conjunction with Cisco wireless LAN controllers & the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1130AG Series can automatically detect the best-available Cisco wireless LAN controller & download appropriate policies & configuration information with no manual intervention. Autonomous access points are based on Cisco IOS Software & may optionally operate with the Cisco Works Wireless LAN Solution Engine (WLSE). Autonomous access points, along with the Cisco Works WLSE, deliver a core set of features & may be field-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network as requirements evolve. The Cisco Aironet 1130AG Series delivers optimal value for offices & similar environments. Built-in antennas provide omnidirectional coverage specifically designed for todays open workspaces. A multipurpose mounting bracket easily secures Cisco Aironet 1130AG Series access points to ceilings & walls. With an unobtrusive design, Cisco Aironet 1130AG Series access points are aesthetically pleasing & blend into their environments. For maximum concealment, the access point may be placed above ceilings or suspended ceilings. The UL 2043 rating of the Cisco Aironet 1130AG Series allows the access point to be placed above ceilings in plenum areas regulated by municipal fire codes. Offered at a competitive price, & optimized for easy installation & operation, the Cisco Aironet 1130AG Series helps organizations attain a lower total cost of ownership. ...