The Cisco multimode VDSL2 & ADSL2/ADSL2+ Enhanced high-speed WAN interface cards support DSL multimode, including very-high-speed VDSL2 & asymmetric ADSL2/ADSL2+. VDSL2 & ADSL2/ADSL2+ are supported on a single WAN interface, thus providing secure, cost-effective connectivity from small businesses to enterprise branch offices. This 1-port enhanced high-speed WAN interface card (EHWIC) supports multimode DSL over Plain Old Telephone System (POTS) & ISDN. The VDSL2 EHWIC provides 1-port multimode VDSL2 & ADSL2/ADSL2+ connectivity to a WAN. This EHWIC, combined with the Cisco Integrated Services Routers (ISRs), provide high-speed digital data transmission between customer premises equipment (CPE) & a central office. This type of deployment enables service providers & resellers to offer additional services by supporting features for business-class security; voice, video, & data integration; differentiated classes of service (Co S). ...

The Cisco Multimode VDSL2/ADSL2+ provides 1-port multimode VDSL2 & ADSL2/2+ WAN connectivity. It ensures high-speed digital data transmission between the customer premises equipment & the central office, usually located on the telephone company premises. This capability enables service providers & resellers to offer additional services such as business-class security;voice, video, and data;differentiated classes of service & managed network access over existing telephony infrastructure. These value-added features provide the mission-critical networking features that businesses expect. ...

Cisco
- SFP (mini-GBIC) transceiver module
- 1000 Base-LX, 1000 Base-LH
- LC/PC single mode
- plug-in module
- up




...

Cisco Rugged SFP
- SFP (mini-GBIC) transceiver module
- LC multi-mode
- up to 2 km
- 1310 nm
- for Aironet 1522; Catalyst




...

Designed For UCS Smart Play Select C3260 Basic, Smart Play Select C3260 Basic Plus, Smart Play Select C3260 Entry, Smart Play Select C3260 Entry Plus, Smart Play Select C3260 Performance, Smart Play Select C3260 Performance Plus, Smart Play Select C3260 Seed, Smart Play Select C3260 Value ...

Cisco SFP+ Copper Twinax Cable
- Twinaxial cable
- SFP+
- SFP+
- 1 m
- for Catalyst 2960, 2960-24, 2960-48, 2960G-24,




...

The range of Cisco 10GBASE XENPAK modules offers customers a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, & service provider transport applications. Cisco 10GBASE XENPAK modules provide flexibility of interface choice & support 10GBASE Ethernet. These hot-swappable input/output devices plug into an Ethernet XENPAK port of a Cisco switch or router to link the port with the network & support the Cisco quality identification (ID) feature that enables a Cisco switch or router to identify whether the module is a Cisco certified & tested XENPAK module. Cisco 10GBASE XENPAK modules also support pay-as-you-populate model. ...

Cisco 10GBASE-SR XFP module for MMF The 10GBASE-SR XFP is dedicated to Ethernet applications only. It supports a link length of 26m on standard FDDI-grade MMF. Up to 300m link lengths are possible when using 2000 MHz/km MMF (OM3). Up to 400m link lengths are possible when using 4700 M Hz*km MMF (OM4). Features Supports 10GBASE Ethernet & OC-192/STM-64 data rates Hot-swappable input/output device plugs into a XFP port of a Cisco Systems router to link the port with the network Provides flexibility of interface choice Supports “pay-as-you-populate” model Supports the digital optical monitoring capability Supports the Cisco quality identification (ID) feature that helps enable a Cisco switch or router to identify whether the module is a Cisco certified & tested XFP Supports optical interoperability with respective Cisco 10GBASE XENPAK & X2, & SFP+ modules on the same link ...

The power injector increases wireless LAN deployment flexibility of the access point by combining 55-VDC power with the data signal, & sending both to the connected access point. The power injector combines 55-VDC power (supplied by internal power supply) with the data signal, sending both to the access point. The power injector provides up to 60 W over all four wire pairs of shielded, outdoor rated Ethernet cable. The total length of the Ethernet cable from the AP to the switch must not exceed 320 ft (100 m). The wire gauge of the cable must be 26 AWG. The Ethernet cable from the switch to the power injector must be a shielded CAT5e or higher Ethernet cable. The Ethernet cable from the power injector to the access point must be a shielded outdoor-rated CAT5e or higher Ethernet cable with a 0.20 to 0.35 inch diameter. A shielded, outdoor Ethernet cable connects the power injector to a 10/100/1000 Ethernet switch, hub, or network, & another shielded, outdoor cable carries power & data to the access points Ethernet port. The power injectors AC power receptacle connects an approved AC power cord to a wall outlet or power strip. The power injector can be mounted on most horizontal & vertical surfaces, but must be mounted in a vertical orientation to comply with safety requirements. ...

The PVDM3 provides higher density & more processing power than the PVDM2, making the addition of rich-media applications possible. Enhanced DSP architecture accommodates a packet-processing engine optimized for rich-media voice & video applications, while concurrently supporting the time-division multiplexing IP (TDM-IP) voice framework used by the PVDM2. The PVDM3 module portfolio has up to 4 times higher density than those in the PVDM2 portfolio. In addition, the PVDM3 modules provide better density for medium- & high-complexity codecs than their equivalent PVDM2 peers. For example, the number of supported medium-complexity codec on a PVDM3-64 is 42, versus 32 on a PVDM2-64. Features High density & flexibility The PVDM3 module portfolio has up to 4 times higher density than those in the PVDM2 portfolio. In addition, the PVDM3 modules provide better density for medium- & high-complexity codecs than their equivalent PVDM2 peers. For example, the number of supported medium-complexity codec on a PVDM3-64 is 42, versus 32 on a PVDM2-64. Voice-quality management The PVDM3 modules perform compression, voice-activity-detection, jitter-management, and echo-cancellation functions. The echo cancellation offered in the PVDM3 modules has a tail length of 128 milliseconds (ms) & complies with ITU-T G.168. Energy-saving feature The PVDM3 DSPs offer multiple power-saving modes, including a power-saver mode when the module is not in use. In power-saver mode each PVDM3 can save up to 5 watts of power. ...