Low-Smoke Zero-Halogen (LSZH) fiber optic patch jumpers from Cables to Go are designed to lessen the emissions of smoke & halogens when the cable is exposed to extreme temperatures. These fiber patch jumpers are perfect for Fast Ethernet, Fiber Channel, ATM & Gigabit Ethernet applications. Use to connect fiber optic equipment to fiber optic cross-connects, cables & information outlets. ...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The SC connector features a push-pull locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

SATA to e SATA cables from Cables To Go provide the newer e SATA connector (external SATA, I type) on one end & the SATA I Type A connector ("L type) on the other. Use this cable to connect e SATA devices to SATA controllers with the Type A connector, or e SATA controllers to SATA drive enclosures with the Type A connector. This cable meets SATA I & SATA II specifications. ...

Today's mission critical advanced Fast Ethernet & Gigabit computer networks require the stability & reliability of Enhanced Category 5 high-speed cabling to distribute data, voice & video. To protect your high-speed network from noise & electromagnetic interference, use Shielded Enhanced Cat 5 Patch Cables from Cables to Go. The molded boot provides extra strain-relief & durability. ...

Today's mission critical advanced Fast Ethernet & Gigabit computer networks require the stability & reliability of enhanced category 5 high-speed cabling to distribute data, voice & video. To protect your high-speed network from noise & electromagnetic interference, use shielded enhanced Cat 5 patch cables from Cables to Go. The molded boot provides extra strain-relief & durability. ...

Today's mission critical advanced Fast Ethernet & Gigabit computer networks require the stability & reliability of enhanced category 5 high-speed cabling to distribute data, voice & video. To protect your high-speed network from noise & electromagnetic interference, use Shielded Enhanced Cat 5 patch cables from Cables to Go. The molded boot provides extra strain-relief & durability. ...

Today's mission critical advanced Fast Ethernet & Gigabit computer networks require the stability & reliability of Enhanced Category 5 high-speed cabling to distribute data, voice & video. To protect your high-speed network from noise & electromagnetic interference, use shielded enhanced Cat 5 patch cables from Cables to Go. The molded boot provides extra strain-relief & durability. ...