Introducing our power extension blocks. Our 4 way extension blocks are perfect for home & office use & has a 2 metre cable to provide power to work stations & any home or office equipment that uses a standard UK plug.

Specification 13A 4G Ext. Socket 2m x 1.25mm Cable Neon light shows socket in operation Mounting hole at rear BS6500 BS1363/A

...

Category 6 cable, commonly referred to as Cat-6, is a cable standard for Gigabit Ethernet & other network protocols that are backward compatible with the Category 5/5e & Category 3 cable standards. Compared with Cat-5 & Cat-5e, Cat-6 features more stringent specifications for crosstalk & system noise. The cable standard provides performance of up to 250 M Hz.

Specification 5 Mtr Grey UTP (Unshielded Twisted Pair) CAT 6 Moulded 24AWG x 4P Patch Type CM (UL) CMH E164469-F3 ISO/IEC 11801 & EN 50288 & TIA/EIA-563-B.2-1 ETL/3P VERIFIED

...

Product details USB (Universal Serial Bus) 3.0 data cable, A male to A male 5 meter. Specification: USB (Universal Serial Bus) 3.0 Superspeed Compatible with USB (Universal Serial Bus) 1.1 & USB (Universal Serial Bus) 2.0 Length 5m USB (Universal Serial Bus) A Male to USB (Universal Serial Bus) A Male data connection 10 Pin Colour Blue ...

99LHT6-600W 0.5m white This Cat 6 network patch cable is an ideal solution for connecting two computer to share files or data. The crossed pin configuration allows two computers to be connected peer-to-peer without the need for a hub or switch. This cable may also be used to connect network switches & hubs without an uplink port to other switches & hubs. Easily transfer files & data between two computers by using this cable to connect & create a peer-to-peer network This Cat 6 network patch cable is an ideal solution for connecting two computer to share files or data. The crossed pin configuration allows two computers to be connected peer-to-peer without the need for a hub or switch. This cable may also be used to connect network switches & hubs without an uplink port to other switches & hubs. Each cable is fully tested, quality inspected, & meets all TIA/EIA Cat 6 standards. This cable has been designed to reduce both impedance & structural return loss (SRL) which ensures error-free transmission. Constructed from high quality cable & a shortened body plug, this design minimises Near-End Crosstalk (NEXT) levels. This patch cable provides the necessary throughput & is able to handle up to Gigabit Ethernet speeds. The booted, snagless design prevents unwanted cable snags during installation without impairing the ability to insert & remove the connector from the port. It also provides unparalleled strain relief so that the cable is not damaged even when pulled excessively. ...

Product details Single Cat 5e Faceplate with two cat 5e modules designed for UK back boxes.

Specification Single Cat

...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5. ¢LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. ¢ Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). ¢S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). ¢ Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. ¢ Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device ¢ This product has been tested & found to comply with the applicable electrical transmission characteristics specified in:ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 ¢IEC 60332-1-2, Ro HS Compliant & 3P Verified ...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5. ¢LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. ¢ Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). ¢S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). ¢ Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. ¢ Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device ¢ This product has been tested & found to comply with the applicable electrical transmission characteristics specified in:ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 ¢IEC 60332-1-2, Ro HS Compliant & 3P Verified ...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5. ¢LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. ¢ Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). ¢S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). ¢ Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. ¢ Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device ¢ This product has been tested & found to comply with the applicable electrical transmission characteristics specified in:ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 ¢IEC 60332-1-2, Ro HS Compliant & 3P Verified ...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5. ¢LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. ¢ Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). ¢S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). ¢ Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. ¢ Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device ¢ This product has been tested & found to comply with the applicable electrical transmission characteristics specified in:ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 ¢IEC 60332-1-2, Ro HS Compliant & 3P Verified ...

Category 6A Ethernet cable, commonly referred to as Cat 6A, is a cable standard for 10 Gigabit Ethernet. The cable standard provides performance of up to 600 M Hz & is suitable for 10BASE-T, 100BASE-TX (Fast Ethernet), 1000BASE-T / 1000BASE-TX (Gigabit Ethernet) & 10GBASE-T (10 Gigabit Ethernet). It is backwards compatible with previous standards such as Cat 6, Cat 5e & Cat 5. ¢LSZH: low Smoke Zero Halogen cable reduces the amount of toxic & corrosive gas emitted during a fire. ¢ Supports 10 Gigabit Ethernet / 10GBASE-T: 10 Times faster than Gigabit Ethernet, 10GE (also called 10 Gb E or 10 Gig E) supports a data rate of 10 Gbits/s (billion bits per second). ¢S/FTP (or S/STP): Screened & Foil (Shielded) Twisted Pair. Each individual pair is screened by foil & features an overall outer sheath. This shielding protects the cable from EMI (Electro-Magnetic Interference). ¢ Snagless Connectors: The connectors feature a bubble which protects the locking clip on the RJ45 from damage or being snapped off during transport or installation. ¢ Flush Moulded Strain Relief: The flush moulded design allows the patch cables to be installed side by side in high-density network switches. The strain relief allows the cables to move without damaging the cable or breaking away from the connector while it is plugged in a device ¢ This product has been tested & found to comply with the applicable electrical transmission characteristics specified in:ISO/IEC 11801 ED.2 & ANSI/TIA-568-C.2 ¢IEC 60332-1-2, Ro HS Compliant & 3P Verified ...