Get the performance you demand at an affordable price with 9/125 Single-Mode Fiber Patch Cables from Cables to Go. They are perfect for high bandwidth applications requiring high transmission rates over longer distances. These cables provide cost-effective solutions for use with today's high speed networks & flexibility to grow with tomorrow's higher bandwidth requirements. ...

Get the performance you demand at an affordable price with 9/125 Single-Mode Fiber Patch Cables from Cables to Go. They are perfect for high bandwidth applications requiring high transmission rates over longer distances. These cables provide cost-effective solutions for use with today's high speed networks & flexibility to grow with tomorrow's higher bandwidth requirements. ...

Product Description With LC to ST termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The small LC connectors satisfy the need for higher port density both in the telecom room & the work area, & offer twice the port density of traditional SC & ST fibre connectors. The LC connector with its RJ-style latch clip design is easy to engage & disengage, & gives each connection greater durability in resisting pulls, strains, snags, & impacts during cabling installs & maintenance. The ST connector features a bayonet locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Low-Smoke Zero-Halogen (LSZH) fiber optic patch jumpers from Cables to Go are designed to lessen the emissions of smoke & halogens when the cable is exposed to extreme temperatures. These fiber patch jumpers are perfect for Fast Ethernet, Fiber Channel, ATM & Gigabit Ethernet applications. Use to connect fiber optic equipment to fiber optic cross-connects, cables & information outlets. Each cable is individually 100% optically inspected & tested for insertion loss & quality. ...

Get the performance you demand at a price that makes sense with Low-Smoke Zero-Halogen (LSZH) Fiber Patch cables from Cables To Go. They provide high bandwidth & transmission rates & support longer distances, but are still cost effective. Perfect for use with today's high speed networks while providing headroom for tomorrow's higher bandwidth requirements.LSZH jackets are composed of materials that lessen the emmissions of smoke & halogens when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gasses is absolutely critical. ...

Product Description With LC to ST termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The small LC connectors satisfy the need for higher port density both in the telecom room & the work area, & offer twice the port density of traditional SC & ST fibre connectors. The LC connector with its RJ-style latch clip design is easy to engage & disengage, & gives each connection greater durability in resisting pulls, strains, snags, & impacts during cabling installs & maintenance. The ST connector features a bayonet locking system. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

LFH-59 cables from Cables to Go provide a connection between n VIDIA Quadro, PNY, or Matrox multiple display graphics cards. Many high-end work stations use multiple display graphics cards that only have a single LFH-59 connection. A break out cable is necessary to convert this single connection into two more common monitor interfaces such as DVI or VGA. Cables to Go offers three variations to meet your needs. ...

Cables To Go, LFH-59 Male to 2 VGA Female Cable LFH-59 cables from Cables To Go provide a connection between n VIDIA Quadro, PNY, or Matrox multiple display graphics cards. Many high-end work stations use multiple display graphics cards that only have a single LFH-59 or LFH-60 (also known as DMS 59 & DMS 60) connections. A break out cable is necessary to convert this single connection into two more common monitor interfaces such as DVI or VGA. Cables To Go offers three variations to meet your needs. Choose from LFH-59 to 2x DVI-I, LFH-59 to 2x VGA, or LFH-59 to 1 DVI-I & 1 VGA. * The only difference between the LFH/DMS 59 & LFH/DMS 60 connectors is-Pin 58 is not populated on the LFH/DMS 59;-Pin 58 is not used on the LFH/DMS 60 so our LFH/DMS 59 cables will work for your LFH/DMS 60 applications. Connectors: LFH/DMS 59 Male to 2x VGA Femal PC & Mac compatible ...

LFH-59 cables from Cables to Go provide a connection between n VIDIA Quadro, PNY, or Matrox multiple display graphics cards. Many high-end work stations use multiple display graphics cards that only have a single LFH-59 connection. A break out cable is necessary to convert this single connection into two more common monitor interfaces such as DVI or VGA. Cables to Go offers three variations to meet your needs. ...

M1 adapters from Cables to Go provide the flexibility to use a standard M1 display-cable to connect to a VGA projector. This M1 adapter will convert an M1 Male connector to a VGA HD15 Male connector. It's perfect for applications when an M1 cable cannot be changed to accommodate a VGA projector. ...