The ATW-DA49 is a UHF (wide-band 440-900 MHz) active unity-gain diversity antenna distribution system that enables one pair of antennas to feed multiple wireless systems. Provides two “1-in, 4-out” RF channels; connects a pair of antennas to as many as four wireless receivers. Either passive or active antennas may be used. Both input jacks offer switchable +12V DC output on their center pins to operate Audio-Technica powered antennas or other in-line RF devices if desired. The unit features all-metal construction for extreme durability & protection from radio frequency interference. The ATW-DA49 is designed to complement Audio-Technica 2000 & 3000 Series wireless systems. It is also suitable for many other wireless systems operating within the 440-900 MHz range.

Includes:: ten RF cables, front-mount antenna cables & connectors, four DC power cables, +12V DC desktop power supply with detachable IEC power cable, & ATW-RM1 rack-mount hardware kit to permit attachment in a standard 19” rack space.

...

Ideal for meetings & teleconferencing, the ATR4697 is a condenser boundary microphone with an omnidirectional polar pattern. It is useful in surface-mounted applications, for meetings, teleconferencing & desktop computer use. The microphones low-profile design assures minimum visibility. Perfect for teleconferencing, meetings & desktop computer use Omni pickup pattern offers full coverage Rugged construction for long-lasting performance On/off switch on bottom of microphone Permanently attached 1.5 m (4.9) cable (3.5 mm mini-plug) ...

The AT-MX341a automatic mixer is ideal for meetings, seminars, teleconferencing, worship services, radio & TV broadcasting & A/V applications. All switching is under microprocessor control with proprietary algorithms for instant, seamless operation. An individual priority pre-select switch for each mic/line channel allows choice of one-channel-at-a-time operation, all channels active, or any mix of moderator override. The last microphone on stays on so that ambient sound is never muted. Plus, any number of Smart Mixers can be linked to create a system for large multi-mic installations. The priority control system extends throughout the entire chain. Four Mic/ Line inputs with individual priority pre-select switch for each channel Balanced inputs & output are individually switchable between mic & line-level Single threshold setting for all channels Individual gain controls for each channel Switchable manual mode overrides automatic functions Master output level control TTL logic output signals available to control speaker or camera switching, tally lights, etc. 12V phantom power individually selectable for each channel Off attenuation for each input adjustable to -20 d B Output level meter with Peak & RMS modes Mounts in a single 19" half-rack space ...

BP892 Subminiature Omnidirectional Condenser Headworn Microphone, less power module. 1.4 m (55") permanently attached miniature cable, unterminated.

Includes:: AT8440 cable clip, AT8464-TH dual-ear microphone mount, two AT8157-TH windscreens, two AT8156-TH element covers, a moisture guard, & a carrying case. See BP892-TH for more details. Handles high sound pressure levels with ease Extremely intelligible natural audio Inconspicuous, lightweight headset with capsule diameter of just 2.6 mm is ideal for applications requiring minimum visibility Ergonomic under-ear design—flexible, lightweight contoured loop hooks behind the ear for an ultra-secure, comfortable fit with or without glasses Comes equipped with AT8464-TH Dual-Ear Microphone Mount that converts single ear-worn Micro Set to a dual-ear-worn unit for maximum stability & comfort

...

Ideal for meetings & teleconferencing, the ATR4697 is a condenser boundary microphone with an omnidirectional polar pattern. It is useful in surface-mounted applications, for meetings, teleconferencing & desktop computer use. The microphone's low-profile design assures minimum visibility. Perfect for teleconferencing, meetings & desktop computer use Omni pickup pattern offers full coverage Rugged construction for long-lasting performance On/off switch on bottom of microphone Permanently attached 1.5 m (4.9') cable (3.5 mm mini-plug) ...

Audio-Technica’s second-generation 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses & places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. New professional features include two available frequency bands & switchable antenna power. Also new to the 2000 Series, the optional ATW-CHG2 two-bay recharging station provides power to recharge Ni MH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a Uni Pak transmitters in any combination. Offering 10 selectable channels in one of two UHF frequency ranges & True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines & sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica’s Tone Lock squelch plus an easy-to-read LCD information display. Features Serious advances in affordable professional wireless Clear sound quality & rock-solid, dependable performance Automatic frequency scanning 10 compatible user-switchable channels in one of two UHF frequency ranges Antenna power available for powered antennas & other in-line RF devices True Diversity operation selects the better signal from the two receiver sections, reducing dropouts Tone Lock tone squelch system fights interference Rugged metal half-rack receiver with soft-touch controls & LCD display Balanced XLR & unbalanced 1/4” output jacks enable use with a wide variety of audio gear Switchable transmitter power output with high & low settings offered

Includes:: rack-mount kit & detachable UHF antennas Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system & receiver ATW-T220a Handheld Microphone/ Transmitter features PRO 41 Capsule for maximum feedback rejection & consistent sound New charger (ATW-CHG2 ) available for ATW-T220a & ATW-T210a transmitters Body-Pack Transmitter RF Power Output: 10 m W Spurious Emissions: According to National Regulations Batteries: Two 1.5V AA alkaline (not included) Current Consumption: 150 m A typical Battery Life: Approximately 9 hours (depending on battery type & use pattern) Dimensions: 2.60" (66.0 mm) W x 3.63" (92.3 mm) H x 0.89" (22.5 mm) D Net Weight: 2.8 oz (80 grams) Handheld Transmitter RF Power Output: 10 m W Spurious Emissions: According to National Regulations Microphone Element: Dynamic cardioid Batteries: Two 1.5V AA alkaline (not included) Current Consumption: 150 m A typical Battery Life: Approx. 9 hours (depending on battery type & use pattern) Dimensions: 9.02" (229.0 mm) long x 2.11" (53.5 mm) maximum diameter Net Weight: 7.8 oz (221 g) Accessory Included: AT8456a Quiet-Flex™ Stand Clamp

...

Audio-Technica’s second-generation 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses & places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price. New professional features include two available frequency bands & switchable antenna power. Also new to the 2000 Series, the optional ATW-CHG2 two-bay recharging station provides power to recharge Ni MH batteries in two ATW-T220a handheld transmitters and/or ATW-T210a Uni Pak transmitters in any combination. Offering 10 selectable channels in one of two UHF frequency ranges & True Diversity UHF wireless technology, the 2000 Series features automatic frequency scanning. At the touch of a button, this function automatically determines & sets the best available frequency. Any of the 2000 Series’ 10 channels may be used together without any frequency coordination problems or group selection issues. The 2000 Series also incorporates Audio-Technica’s Tone Lock squelch plus an easy-to-read LCD information display. Features Serious advances in affordable professional wireless Clear sound quality & rock-solid, dependable performance Automatic frequency scanning 10 compatible user-switchable channels in one of two UHF frequency ranges Antenna power available for powered antennas & other in-line RF devices True Diversity operation selects the better signal from the two receiver sections, reducing dropouts Tone Lock tone squelch system fights interference Rugged metal half-rack receiver with soft-touch controls & LCD display Balanced XLR & unbalanced 1/4” output jacks enable use with a wide variety of audio gear Switchable transmitter power output with high & low settings offered

Includes:: rack-mount kit & detachable UHF antennas Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system & receiver ATW-T220a Handheld Microphone/ Transmitter features PRO 41 Capsule for maximum feedback rejection & consistent sound New charger (ATW-CHG2 ) available for ATW-T220a & ATW-T210a transmitters

...

The length (14.53") of the AT8035 Line + Gradient Condenser Microphone is well-suited for ENG, outdoor recording & other specialized uses. The microphone is designed for video production & broadcast (ENG/EFP) audio acquisition. Suited for both boom & handheld use, it provides the narrow acceptance angle desirable for long-distance sound pickup, featuring excellent sound rejection from the sides & rear of mic & switchable low-frequency roll-off. It operates on battery or phantom power. Designed for video production & broadcast (ENG/EFP) audio acquisition Length is well-suited for ENG, outdoor recording & other specialized uses Provides the narrow acceptance angle desirable for long-distance sound pickup Excellent sound rejection from the sides & rear of mic Switchable low-frequency roll-off Operates on battery or phantom power Ro HS compliant
- free from all substances specified in the EU directive on hazardous substances Specifications Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: Line + gradient Frequency Response: 40-20, 000 Hz Low Frequency Roll Off: 80 Hz, 12 d B/octave Open Circuit Sensitivity: Phantom: -38 d B (12.5 m V) re 1V at 1 Pa Battery: 39 d B (11.2 m V) re 1V at 1 Pa Impedance: Phantom: 250 ohms Battery: 300 ohms Maximum Input Sound Level: Phantom: 132 d B SPL, 1 k Hz at 1% T.H.D. Battery: 120 d B SPL, 1 k Hz at 1% T.H.D. Dynamic Range: Phantom: 110 d B, 1 k Hz at Max SPL Battery: 98 d B, 1 k Hz at Max SPL Signal to Noise Ratio: 72 d B, 1 k Hz at 1 Pa Phantom Power Requiremens: 11-52V DC, 2 m A typical Battery Type: 1.5V AA/UM3 Battery Current Life: 0.4 m A / 1200 hours typical (alkaline) Switch: Flat, roll-off Weight: 170 g (6.0 oz) Dimensions: 369.0 mm (14.53") long, 21.0 mm (0.83") diameter Output Connector: Integral 3-pin XLRM-type
...

The Audio-Technica Lavalier Microphone Clip AT8434 is a simple lavalier microphone clip that offers you the ability to perfectly position your Audio-Technica microphone. This unit is black & is designed to work with Audio-Technica case style M8. Perfect Microphone Positioning Place your microphone exactly where you need it with this convenient clip designed to work with Audio-Technica microphones. ...

The AT8646QM shock-mount plate effectively isolates mounted microphones from impact vibration & mechanical noise normally transmitted from the mounting surface. It is intended for use with microphones mounted on lecterns pulpits conference tables & similar surfaces. Designed especially for Uni Point¨ & Engineered Sound gooseneck microphones they may be used with other lightweight plug-in microphones with XLRM-type outputs. The AT8646QM can be mounted in any smooth horizontal surface. All connections exit the bottom of the mount & are via screw terminal strips. Weight 64 g.

Dimensions W x D x H78.0 mm (3.07) wide 78.0 mm (3.07) deep mm.

...