Powerful Smart Auto-Switching The HDCAT’s smart switching capability eliminates the need to manually change inputs. Simply power on/off a source device & the matrix conveniently switches automatically. Go Further with More Extend your audio/visual experience up to 330ft. HDBase T technology means that you can send power, video (up to 1080p or 1920x 1200) & audio (all Lossy & Lossless formats) signals over a single category cable. Power of One for All Leave behind the power cable on your receiver. With the latest feature of Power over Category cable (Po Cc) the HDCAT transmits power to all the connected receivers over category cable. Never too Many Displays With a built in local HDMI loop out, send your source to multiple HDCATs. Use one source signal for as many as 8 daisy chains. Additional Features Redundant power supply (optional) EDID learning mode to ensure compatibility Built in S/PDIF & Analog audio loop outs Supports pass through of all 3D formats Pass through support of all Lossy & Lossless audio (up to Dolby True HD or DTS-HD Master Audio). Locking HDMI port Field serviceable firmware port

Includes:: dual purpose wall/rack mount ears, IR remote

...

Atlona HDMI to HDBase T Transmitter Wall Plate Simplify installation with an attractive wall plate that transmits HDMI signals up to 230 feet (70 meters); support up to Ultra HD (4 Kx 2K). HDBase T & power over category cable (Po Cc) allow signal & power over a single category cable. In-Wall Installation Designed for in-wall installation using 2-gang electrical boxes. No power is needed at the transmitter When used with compatible Atlona solution. Higher Resolutions at Longer Distances HDTX-WP wall plates support resolutions up to 1080p as far away as 230 feet (70 meters) & Ultra HD (4 Kx 2K) up to 130 feet (40 meters). Complete Control, Completely Compatible HDTX-WP features complete RS-232, & IR control compatible with all major control systems. Features Works with HDMI up to Ultra HD 4 Kx 2K US 2-gang or optional UK wall plate 3-way power Po Cc to receiver Po Cc from receiver Local power supply Suggested Receiver ...

Advanced switcher for classrooms & business! AT-UHD-CLSO-612 simplifies classroom or boardroom system design & installation. 2 HDMI, 2 HDBase T & 2 multi-function analog inputs enable integration of both new & legacy sources with HDMI displays. Guaranteed compatibility between the source & the display with an internal scaler that supports resolutions up to 4K/UHD. Microphone ducking makes talking over presentations simple. Balanced analog audio embedding & de-embedding with volume control reduce system cost & complexity. Control the AT-UHD-CLSO-612 by IR remote, front panel, TCP/IP or RS-232 to optimize the user interface. Features HDMI ports quantity 2 VGA (D-Sub) ports quantity 2 Weight 3.14 kg ...

AT-VTP-800-BL Velocity 8" Touch Panel
- Black The Atlona AT-VTP-800-BL is a black 8& Prime; touch panel for the Atlona Velocity
...

The Atlona AT-VTP-TMK is a tabletop mounting kit for the AT-VTP-800-BL & AT-VTP-800-WH touch panels in the Atlona Velocity Control System. It allows convenient placement of a touch panel on a meeting table, lectern, credenza, or anywhere else appropriate for a freestanding AV control panel. The VTP-TMK features a visually appealing profile that accents the styling of the VTP-800-BL or VTP-800-WH. An opening at the bottom rear facilitates easy network cable routing. The VTP-TMK also can be secured onto the surface for a permanent, fixed installation. Features • Tabletop mount kit for Velocity Control System touch panels – AT-VTP-800-BL & AT-VTP-800-WH • Provides a 65° fixed operating angle • Bottom / rear opening allows easy network cable routing • Mount can be secured onto surface ...

The Atlona AT-OMNI-1XX-RACK-1RU is a 1U, full rack width shelf accessory that provides easy mounting & organization of two Omni Stream encoders or decoders in an equipment rack. ...

Switcher for HDMI & VGA Inputs with HDBase T Output The AT-HDVS-200-TX-WP is a 2x 1 wall plate switcher for HDMI & VGA inputs with HDBase T output. It features a US, two-gang, Decora form factor with one HDMI & one VGA input with an always-on 3.5mm audio connector. HDMI signals up to 4K/UHD @ 60 Hz (YUV 4:2:0 color sub-sampling), VGA input signals up to 1920x 1200, embedded audio, & control signals can be extended up to 328 feet (100 meters). The switcher receives power from the AT-HDVS-200-RX scaler via Power over Ethernet & together they create a standalone AV switching & control system with scaling for classrooms & huddle rooms. Display control & volume commands are transmitted via CEC, IP, or RS-232 to any display, control system, switcher or other controllable device. The AT-HDVS-200-TX-WP can be the central component of a small, automated AV system. Automatic display control turns-on the display automatically whenever a source is connected. When the source is removed, the display is turned off. Volume is controlled by using the front panel or other control signals. Automatic input selection on the AT-HDVS-200-TX-WP works by sensing the presence of any video signal. With automatic input selection, manual control systems can be eliminated. Using the AT-PS-POE, it can connect directly to Atlona HDBase T receivers such as the AT-UHD-EX-100CE-RX or projectors with HDBase T inputs, enabling simplified control & adding legacy VGA inputs at the HDVS. The AT-HDVS-200-TX-WP combines the benefits of a switcher with built-in automatic display control, auto-switching & the advantages of Ethernet enabled HDBase T signal transmission over a single cable. The switcher enables input selection & volume control from the front panel, RS-232, or TCP/IP commands. It is a premium upgrade to the AT-HDVS-150-TX-WP, offering advanced functions including IP management, IP & CEC display control, volume control, & contact closure for screen control (when used with the HDVS-200-RX), volume control, & Ethernet-enabled (100 m) HDBase T performance. The HDVS-200 Series incorporates many integrator-requested features while still maintaining overall value. Automatic Display Control The AT-HDVS-200-TX-WP allows display control using CEC, TCP/IP or RS-232 signals. This means that many more types of displays can be controlled, costs are reduced, & that wiring is simplified. In a commercial setting, when a switcher is integrated with a display, the AT-HDVS-200-TX-WP forces the display to power on automatically when a laptop is connected. At the end of the presentation, when the presenter disconnects the laptop, the AT-HDVS-200-TX-WP forces the display to power off. Ease of presenter interaction with the system & the savings incurred by auto-display shutdown provide a significant return on investment. • CEC – The AT-HDVS-200-TX-WP features Consumer Electronics Control (CEC) providing simplified display control for a significant reduction in the cost of the display (compared to an RS-232 controlled display). CEC is a communication channel incorporated in the HDMI

Specification allowing connected devices to control each other. • TCP/IP – The TCP/IP signal can be transmitted either through an independent LAN connection or through the HDBase T connection when connected to an AT-HDVS-200-RX receiver which allows Ethernet over HDBase T. The LAN port on the AT-HDVS-200-TX-WP not only connects to the AT-HDVS-200-TX-WP, it also extends out the HDBase T connection through an internal hub. A connected router is required to manage IP addresses. • RS-232 – Many displays including projectors, commercial flat panel displays, & some consumer displays can be controlled using the RS-232 signal directly from the switcher. The scaler is able to send commands using RS-232 for automatic display control to compatible displays. • FLEXIBLE, POWER BUTTON – The power button on the front panel can be set to either turn the AT-HDVS-200-TX-WP on/off or it can be set to control the attached display. In addition to using the front panel power button, display on/off commands can be triggered automatically based on presence of video signals, or by a third-party control system using either TCP/IP, RS-232, or CEC signals. • SWITCHER OR DISPLAY VOLUME CONTROL – Volume control buttons on the front panel can control either the analog audio output of the AT-HDVS-200-TX-WP or they can be set to control the volume of any device that allows volume control using TCP/IP or RS-232, such as a flat panel display, DSP, or another switcher. This gives great flexibility to the system design. • MULTIPLE POINTS OF CONTROL – Since all these commands can be sent using TCP/IP, it becomes simple to have multiple control points in a larger system. The AT-HDVS-200-TX-WP could be used as an input device for an AT-UHD-CLSO-824, AT-UHD-CLSO-612ED, or AT-UHD-SW-5000ED, & the buttons would then be able to manage a variety of functions such as “ Show me” & volume. Reliable Auto-Switching Automatic input selection on the AT-HDVS-200-TX detects an active video signal, rather than looking for the 5-volt, hot plug signal. This means that devices such as DVRs, Display Port adaptors & other devices that keep the 5-volt hot, no longer trigger the automatic input selection. This gives far more reliable performance with these products. HDVS-200 Series The HDVS-200-TX-WP is a simple audio visual system with automatic input selection for HDMI & VGA inputs & automatic projector on/off/volume control. It is a premium upgrade to the HDVS-150 Series offering functions that enable IP management, & other advanced installation functions including IP display control, contact closure for screen control, CEC display control for consumer displays & Ethernet-enabled (100 m) HDBase T performance. The switcher can be installed under a desk/table/lectern. The HDVS-200 series incorporates many integrator-requested features while still maintaining overall value. The AT-HDVS-200-TX-WP is ideal for: Complete System Applications: Used with the AT-HDVS-200-RX, the wall plate switcher accommodates an HDMI 1080p source plus a VGA source in classrooms, huddle rooms, & small conference rooms. The pair offers auto-switching, HDBase T transmission, scaling, & control functions. Included are IP configuration/management & other advanced installation functions such as IP display control, contact closure for screen control, CEC display control for consumer displays & Ethernet-enabled (100 m) HDBase T performance. Larger System Applications: The AT-HDVS-200-TX-WP works as a remote input device for switchers with HDBase T inputs including the AT-UHD-CLSO-824 matrix switcher, the AT-UHD-CLSO-612ED, or the AT-UHD-SW-5000ED. The buttons can be used with the switcher for display power, show me functions & volume. Configured & Managed by AMS The AT-HDVS-200-TX-WP also supports the Atlona Management System (AMS), a powerful network software platform that integrates product configuration, management & updating. Specially designed for IP-controllable Atlona Products, the Atlona Management System reduces installation time & enables remote monitoring & support. To learn more please visit AT-SW-AMS. Features 2x 1 HDBase T switcher • Features one HDMI input plus a VGA input with 3.5mm audio connector • Allows advanced HDMI display devices to be used with legacy VGA sources Automatic display control • Automatically changes projector power state based on active or standby mode of switcher. Control signals transmitted via CEC, IP, or RS-232 • Eliminates need for complex control system in AV systems. CEC enables control of low-cost consumer displays. Automatic input selection using video detection technology • Selects active input when sources are connected • Eliminates need for a complex control system in AV systems TCP/IP & RS-232 control of switcher • Flexible control options for compatibility with third-party control systems. RS-232 controlled from HDBase T connection • Reduces integration time & costs Ethernet-enabled, HDBase T extension • Transmits IP & AV signals up to 328 ft. (100m) • Uses easy-to-integrate category cable for low-cost, reliable system installation Front panel input select button • Overrides auto-switching when two active sources are present • Simple manual control allows presenter to maintain control of AV system Front panel Display on/off control • Offers convenient user features to override auto-switching when two active sources are present plus display • Simple manual controls allow presenter to maintain control of AV system Front panel volume control • Remotely controls audio volume using TCP/IP or RS-232; provides ‘ Mute’ mode • Eliminates need for manual operation of display or use of IR remote control Works with AMS • This IP-controllable product can be remotely managed by the Atlona Management System software • Integrates product configuration, management, & updates to reduce installation time & enable remote support Included accessories • User guide & mounting brackets Award-winning 10 year limited product warranty • Ensures long-term product reliability & performance in residential & commercial systems • Specify, purchase, & install with confidence

...

Atom Gaming PC Case with 2 x 15 LED 12cm Fans with Side Window The Game Max Atom Computer Case, is an ideal solution for the gaming enthusaist, with the stylised side window, black interior & internal cable management system. The excellent cooling solution, with up to 5 x 120mm fans (2 x Blue LED inc.), helping to keep the computer temperature low. The 1 x USB3.0 & 2 x USB2.0 give the user high speed transfer rates. Front I/O Panel
- 1 x USB (Universal Serial Bus) 3.0, 2 x USB (Universal Serial Bus) 2.0, Headphone & Microphone sockets Excellent Cooling System
- 2 x Blue LED fans inc., with the option of adding an additional 3 x 120mm fans Stylised Side Window
- For the gaming enthusiast to allow for internal LEDs to be added Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling: Water Cooling Ready! Body

Material: 0.5mm SPCC Front Bezel

Material: Plastic Side Panel: Window External Bays: 1 x 5.25 External 1 x 3.5 External Internal Bays: 4 x 3.5 Internal 3 x 2.5 Internal Drive Bay Notes: 1 x 5.25" Internal (Behind USB), 1 x 2.5" on base of case Expansion Slots: 7 x Full Size Cooling Front: Space for 2 x 12cm Fan (2 x Blue LED fan inc.) Cooling Top: None Cooling Rear: Space for 1 x 12cm Fan (Not Included) Cooling Side: None Cooling Bottom: Filtered Vent for PSU IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: Water Cooling
- 2 Pipe push outs on rear of case PSU Included: No













...

Both practical & compact the DSi Suite increases your fun with your new Nintendo DSi console. This unique product offers CHARGING STANDING & STORAGE solutions. 1) CHARGE while playing. 2) adjustable STAND for added comfort whilst using multimedia or reading functionalities of the console. 3) STORAGE:

Includes:: 2 slots for game cartridges & 1 slot for an SD card.

...

Atomic proudly presents a prestigious accessories set branded Automobili Lamborghini, to fully enjoy the PSP Slim TM & PSP 3000TM consoles in your car (and not only) The rigid case stars a printed Automobili Lamborghini logo to safely carry the console with style & elegance. The car charger will never let your console run dry even in the longest trips. The practical & adjustable car stand is the perfect solution to fully enjoy the consoles multimedia & GPS capabilities on the move. ...