APC offers a wide variety of Basic Rack Power Distribution Units (PDUs), which allow users to distribute power outlets to rack-mount equipment. Horizontal & vertical units are available as well as a variety of power inputs & outputs to fit most power environments. ...

APC Metered by Outlet with Switching Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control & individual outlet power metering. Remote outlet level controls allow power on/off functionality for power recycling to reboot locked-up equipment & to avoid unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery & extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, & locking IEC receptacles. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, & control switched rack PDUs through secure Web, SNMP, or telnet interfaces & is complimented by APC centralized management platforms using Infra Struxure central, capacity manager & change manager. ...

Rack PDU 2G, Metered, Zero U, 22.0k W (32A) 17.3k W (24A), 230V, (30) C13 & (12) C19 APC Metered Rack Power Distribution Units (PDUs) provide active metering to enable energy optimization & circuit protection. User-defined alarm thresholds mitigate risk with real-time local & remote alerts to warn of potential circuit overloads. Metered Rack PDUs provide power utilization data to allow Data Center Managers to make informed decisions on load balancing & right sizing IT environments to lower total cost of ownership. Metered Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, & ultra low profile circuit breakers. Users can access & configure Metered Rack PDUs through secure Web, SNMP, or Telnet Interfaces which are complimented by APC Centralized Management platforms using Infra Struxure Central, Operations, Capacity, & Energy Efficiency. Availability Remote Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements. Local Current Monitoring Display The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only) Alarm Thresholds Define alarm thresholds in order to avoid overloaded circuits. Network & visual alarms inform the user of possible problems. (Note: Only available on units with the current monitoring capabilities. Please see SKU specifications for availability) Load indicator LED Indicates overload & warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits. Integrates with Struxure Ware Data Center Expert An IT-ready, scalable access monitoring system that collects, organizes, & distributes critical alerts, surveillance video & key information, providing a unified view of complex physical infrastructure environments from anywhere on the network Flash Upgradeable Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only) Agility Rack-Mountable

Includes:: horizontal, vertical, & toolless-mount varieties. Puts power where it is needed most
- in the racks near the equipment. Single input power source Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections. Wide range of input & output connections Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip. Specification Output Nominal Output Voltage
- 230V Maximum Total Current Draw per Phase
- 32A Output Connections
- (30) IEC 320 C13 / (12) IEC 320 C19 Overload Protection
- Yes Input Nominal Input Voltage
- 400V 3PH Input Frequency
- 50/60 Hz Input Connections
- IEC 309 32A 3P+N+E Cord Length
- 1.83 meters Maximum Line Current per phase
- 32A Maximum Input Current per phase
- 32A Load Capacity
- 22 k VA Physical Net Weight
- 8.72 KG Maximum Height
- 1829.00 mm Maximum Width
- 56.00 mm Maximum Depth
- 51.00 mm Shipping Weight
- 11.55 KG Shipping Height
- 2050.00 mm Shipping Width
- 170.00 mm Shipping Depth
- 112.00 mm Color
- Black Environmental Operating Environment
- 0
- 55 °C Operating Relative Humidity
- 5
- 95% Operating Elevation
- 0-3000 meters Storage Temperature
- -25
- 65 °C Storage Relative Humidity
- 5
- 95% Storage Elevation
- 0-15000 meters Conformance Regulatory Approvals
- EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, VCCI Class A, VDE Standard Warranty
- 2 years repair or replace Sustainable Offer Status Ro HS
- Compliant REACH
- REACH: Contains No SVHCs
Includes:: Installation guide, Rack Mounting brackets, Safety guide, Serial configuration cable







































...

The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. Define alarm thresholds in order to avoid overloaded circuits. Network & visual alarms inform the user of possible problems. Load Indicator indicates overload & warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.

Includes:: horizontal, vertical, & tool less-mount varieties. Puts power where it is needed most
- in the racks near the equipment. Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. saves your valuable time & money during installation by using one branch whip & standard connections. Product family

Includes:: a variety of input & output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs & outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4k W using a single branch whip.




...

Features Onboard PCH M.2 heatsink: Design for optimal heat dissipation & gaming performance. Optimal Cooling: Compatible for AM3/AM4 Cooler & water cooling headers zone Aura Sync RGB LED: stunning synchronised effects with two Aura 4-pin RGB-strip headers & one addressable header. Best gaming audio: Supreme FX S1220 teamed with Sonic Studio III, cast an aural landscape that draws you deeper into the action. 5-Way Optimisation: One-click system-wide overclocking. Best gaming networking: Intel Gigabit Ethernet, LANGuard Game First & 2x 2 802.11ac Wi-Fi with MU-MIMO support. Best gaming connectivity: Dual M.2 & USB (Universal Serial Bus) 3.1 Gen 2 Type-A & Type-C™ connectors. Best gaming durability: ASUS Safeslot & premium components for maximum durability Overview For more than a decade, Republic of Gamers has delivered exemplary design & performance to thrill the worlds best players & PC enthusiasts. Our journey is a road without end. Now, its time for competitors to be warned & for gamers & enthusiasts to push the limits — the packed & pumped ROG Crosshair VI Extreme is ready to defeat all challengers! PCH M.2 HEATSINK ROG Crosshair VI Extreme is equipped with an M.2 heatsink integrated into the PCH heatsink. With its huge cooling surface, the M.2 heatsink perfectly chills an inserted M.2 SSD — providing maximum performance & reliability. Featuring a stylish angular design replete with an awesome glowing ROG eye logo, the M.2 heatsink adds a beautiful touch to the build, while the T-sensor detects temperatures in the vital M.2 area for instant monitoring. WATER COOLING ZONE ROGs innovative Water Cooling Zone lets you monitor your cooling system like never before. The dual water-temperature headers & flow-rate header of the ROG Water Cooling Zone feeds information straight into ROGs intuitive Fan Xpert 4 utility &9472; so you can stay on top of the heat & stay cool in every game! AURA LIGHTING CONTROL Customise your own favorite LED effects with intuitive, ASUS-exclusive lighting-control software. Aura RGB technology makes it possible to cast a stunning multicolor glow across your entire build, via the ROG Crosshair VI Extremes brilliant built-in RGB LEDs or attached RGB strips via the two onboard 4-pin headers &9472; all lights will perform in perfect synchronisation! Fire up Aura & enjoy the creative freedom of nine different lighting schemes! ...

Bankers Box Woodgrain Premium Transfer Files (Pack of 10) Product Overview Bankers Box Woodgrain Premium Transfer Files (Pack of 10) 0005302 This Bankers Box premium transfer file features Fastfold automatic assembly & is suitable for storing both A4 & foolscap paperwork. This high strength transfer file also features an extra large spine label for quick & easy identification. Compatible with Bankers Box premium storage boxes, this pack contains 10 woodgrain transfer files measuring W127 x D359 x H254mm. Maximum strength transfer file with locking tab lid Fastfold automatic assembly Suitable for storage of A4, foolscap, foolscap or legal size paperwork Compatible with Premium storage boxes Made from 100% recycled board Internal dimensions: W127 x D359 x H254mm Stylish woodgrain design Pack of 10 ...

. rm-cont h 2, . rm-row h 2{margin:0 0 10px}.u 1, . u 1-2{float:left}.rm-row{
Width:725px;overflow:hidden;padding:30px 0;border-bottom:1px
...

Printing images is made easy by using the Canon CLI-8C cyan ink. Using original ink, like the cyan Canon CLI-8C ink cartridge ensures excellent printer performance & high-quality output with reliability you can trust. The Canon CLI-8C ink blends well with other colours to offer clear & sharp texts & images that will impress. You can get good value for your money with the Canon CLI8C printer cartridge as it offers exceptional quality print time after time. With an estimated page count of 207 prints per cartridge this genuine Canon CLI8C ink would be ideal for a home environment which has moderate printing requirements. ...

Canon has poured all the Know How of its extraordinary history of developing innovative office machines into each of its copiers, printers, & networked office systems. The same superiority of design & manufacture goes into all of the Canon-branded consumable imaging supplies & parts for this equipment. Naturally, no one makes better parts & supplies for Canon products than Canon. Using genuine Canon parts & supplies is your best insurance against equipment damage, & possibly voiding your equipment warranty.
- For use with Canon image PROGRAF i PF6100, image PROGRAF i PF6200
- Red

...

Genuine OEM Canon PFI-106R 130ml ink cartridges for Canon image PROGRAF graphics & photo printers, available from stock for immediate dispatch from Graphic Design Supplies Ltd PFI-106R Red Pigment Ink Manufacturer: Canon Vendor Code: 6627B001AA Capacity: 130ml Machine Compatibility: i PF6300, i PF6350, i PF6400, i PF6400SE, i PF6450 ...