Aruba 10G SFP+ LC SR 300m OM3 MMF Transceiver 0GBASE-SR Small Form-factor Pluggable Plus (SFP+). Standards based 10-Gigabit Ethernet (10GBASE-SR). 10 Gbit/sec line speed. Operating distance up to 300m on OM4 fibre. Transmitter wavelength 850nm. Industry-standard LC duplex connector. Multimode Fibre (MMF). ...

A 10-Gigabit transceiver in SFP+ form-factor that supports the 10-Gigabit SR standard, providing 10-Gigabit connectivity up to 400m on OM4 multi-mode fiber. Cable length: 7 m, Connector 1: SFP+, Connector 2: SFP+ ...

Designed For Aruba 2530, 26XX, 2930F 24, 2930F 48, 2930F 8G, 2930M 24, 2930M 40, 2930M 48, 29XX, 3800, 3810M 16, 3810M 24, 3810M 40, 3810M 48, 8320, MACsec Advanced Module;HPE 18XX, 20, 25XX, 2610, 2810, 6120, 9400sl 40, E2810, E2910, E3500, EP Redundant Management Module, HP 2510-24; Office Connect 1410 24 ...

200 SERIES SPECIFICATIONS 2.4-GHz (300 Mbps max rate) & 5-GHz (867 Mbps max rate) radios, each with 2x 2 MIMO & two combined, diplexed external RP-SMA antenna connectors. ADVANCED FEATURES RF management Adaptive Radio Management™ (ARM) technology automatically assigns channel & power settings, provides airtime fairness & ensures that APs stay clear of all sources of RF interference to deliver reliable, high-performance WLANs. The 200 Series APs can be configured to provide part-time or dedicated air monitoring for spectrum analysis & wireless intrusion protection, VPN tunnels to extend remote locations to corporate resources, & wireless mesh connections where Ethernet drops are not available. Spectrum analysis Capable of part-time or dedicated air monitoring, the spectrum analyzer remotely scans the 2.4-GHz & 5-GHz radio bands to identify sources of RF interference. Security With an Open DNS service subscription, Aruba Instant APs deliver integrated web filtering, malware & botnet protection to every device connected to the WLAN. Integrated Trusted Platform Module (TPM) for secure storage of credentials & keys Secure Jack-capable for secure tunneling of wired Ethernet traffic. WIRELESS RADIO SPECIFICATIONS AP type: Indoor, dual radio, 5-GHz 802.11ac & 2.4-GHz 802.11n 2x 2:2 Software-configurable dual radio supports 5 GHz (Radio 0) & 2.4 GHz (Radio 1) 2x 2 MIMO with two spatial streams & up to 867 Mbps wireless data rate Supported frequency bands (country-specific restrictions apply): 2.4000 GHz to 2.4835 GHz 5.150 to 5.250 GHz 5.250 to 5.350 GHz 5.470 to 5.725 GHz 5.725 to 5.850 GHz Available channels: Dependent on configured regulatory domain Dynamic frequency selection (DFS) optimizes the use of available RF spectrum Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) Supported modulation types: 802.11b: BPSK, QPSK, CCK 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Transmit power: Configurable in increments of 0.5 d Bm Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): 2.4 GHz band: +21 d Bm (18 d Bm per chain) 5 GHz band: +21 d Bm (18 d Bm per chain) Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks Maximum ratio combining (MRC) for enhanced receiver performance Cyclic delay/shift diversity (CDD/CSD) for enhanced downlink RF performance Short guard interval for 20-MHz, 40-MHz & 80-MHz channels Space-time block coding (STBC) for increased range & enhanced reception Low-density parity check (LDPC) for high-efficiency error correction & increased throughput Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2) 802.11n high-throughput (HT) support: HT 20/40 802.11ac very high throughput (VHT) support: VHT 20/40/80 802.11n/ac packet aggregation: A-MPDU, A-MSDU ANTENNAS AP-204/IAP-204: Two RP-SMA connectors for external dual band antennas. Internal loss between radio interface & external antenna connectors (due to diplexing circuitry): 1.5 d B in 2.4 GHz & 3.0 d B in 5 GHz. OTHER INTERFACES 10/100/1000BASE-T Ethernet network interface (RJ-45) Auto-sensing link speed & MDI/MDX 802.3az Energy Efficient Ethernet (EEE) Po E-PD: 48 Vdc (nominal) 802.3af Po E DC power interface, accepts 1.7/4.0-mm center-positive circular plug with 9.5-mm length Serial console interface (proprietary; optional adapter cable available) Visual indicators (LEDs): Power/system status Ethernet link status (ENET) Radio status (two; RAD0, RAD1) Reset button: factory reset (during device power up) Serial console interface (RJ-45) Kensington security slot POWER Maximum (worst-case) power consumption: 12.5 watts (Po E) or 11.7 watts (DC) Maximum (worst-case) power consumption in idle mode: 8.4 watts (Po E) or 7.7 watts (DC) Direct DC source: 12 Vdc nominal, +/- 5% Power over Ethernet (Po E): 48 Vdc (nominal) 802.3af-compliant source Power sources sold separately When both power sources are available, DC power takes priority MOUNTING Included with AP: Mounting brackets (2) for attaching to 9/16-inch or 15/16-inch T-bar drop-tile ceiling Spare mounting kit: AP-220-MNT-C1: Aruba AP mount kit contains two ceiling-grid rail adapters for flat rails Optional mounting kits AP-220-MNT-C2: Aruba AP mount kit contains two ceiling-grid rail adapters for Interlude & Silhouette style rails AP-220-MNT-W1: Aruba AP mount kit contains one basic flat-surface wall/ceiling mount bracket AP-200-MNT-W2: Aruba AP mount kit contains one secure flat-surface wall/ceiling mount cradle MECHANICAL Dimensions/weight (unit, excluding mount accessories): 150 mm x 150 mm x 41.5 mm (W x D x H) 380 g Dimensions/weight (shipping): 190 mm x 187 mm x 57 mm (W x D x H) 550 g ...

Multifunctional & affordable Instant 205 802.11ac wireless APs maximize mobile device performance in medium-density enterprise Wi-Fi environments. These compact & cost-effective dual-radio APs deliver wireless data rates of up to 867 Mbps to 5-GHz devices with 802.11ac technology leveraging two spatial MIMO streams while simultaneously supporting 2.4-GHz 802.11n clients with data rates of up to 300 Mbps. IAP-205 features four integrated omni-directional downtilt antennas. ...

The multifunctional & affordable AP-205H access point (AP) combines high-performance wireless mobility with wired Gigabit Ethernet access in a surprisingly compact device. This compact & cost-effective dual-radio AP easily mounts to a standard data wall-box & uses the existing structured cabling system to provide secure wired & wireless network access in dormitories, classrooms, hotels, medical clinics & multitenant environments. Capable of delivering high-performance Wi-Fi services to multiple rooms, the 205H simplifies RF coverage planning & reduces WLAN deployment costs. The AP-205H is built to provide years of trouble-free operation. The integrated antennas of the 205H are optimized for the deployments with the AP mounted vertically on either a wall or desk. The antenna patterns are slightly directional, focusing RF energy to & from the area facing the front of the AP. Three local Gigabit Ethernet ports are available to securely attach wired devices to your network. One of these ports is also capable of supplying Po E power to the attached device. ...

These compact & cost-effective dual-radio APs deliver wireless data rates of up to 1.3 Gbps to 5-GHz devices with 802.11ac technology. They also support 3 x 3 MIMO with three spatial streams as well as 2.4-GHz 802.11n clients at data rates up to 450 Mbps. IAP-215 features six integrated omni-directional downtilt antennas. ...

- Device Type: Radio access point
- Ruggedized Design: Indoor
-

Width: 20.3cm
-








...

- Device Type: Switch
- 24 ports
- Managed
- Enclosure Type: Desktop, rack-mountable, wall-mountable
- 1U
- Subtype:




...

PHYSICAL INTERFACES 24 RJ-45 autosensing 10/100/1000 Po E+ ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T, IEEE 802.3at Po E+); Media Type: Auto-MDIX; Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 fixed Gigabit Ethernet SFP ports Additional ports & slots 1 dual-personality (RJ-45 or USB (Universal Serial Bus) micro-B) serial console port Memory & processor ARM9E @ 800 MHz, 128 MB flash Packet buffer

Size: 3 MB (48G switches only) or 1.5 Mb dynamically allocated 256 MB DDR3 DIMM

Dimensions (H) 4.45 cm x (W) 32.26 cm x (D) 25.40 cm (1.75” x 17.44” x 13.00”) (1U height) Weight: 8.7 lb (3.95 kg) Performance 100 Mb Latency: < 7.4 µs (LIFO 64-byte packets) 1000 Mb Latency: < 2.3 µs (LIFO 64-byte packets) Throughput: up to 41.6 Mpps (64-byte packets) Switching capacity: 56 Gbps



...