Additional Fan for More Cooling Capacity Two low noise 120 mm fans mounted on opposite sides of the heatpipe provide a great airflow. The first fan pushes air through the heatsink, the second fan pulls the air out of the heatsink. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports Edition heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Optimised Fan Design We further optimised the fan blade design to get a higher airflow at lower noise generation. With the range of 200 to 1 800 RPM the fans of the Freezer 33 e Sports Edition are controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed. Extended Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. enhanced Heat Dissipation The Freezer 33 e Sports Edition has off-centered heat pipes that disperse the heat in a more efficient than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports Edition is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 103 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

High Performance CPU Cooler The Freezer 33 e Sports ONE is a powerful Tower CPU cooler equipped with our new Bioni X Fan. Thanks to a newly developed thermal coating & our new Bioni X F120 fan the cooler gives you top notch performance for CPUs with a TDP up to 200 W. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports ONE heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Wide Range of Regulation With the range of 200 to 1800 RPM the fan of the Freezer 33 e Sports ONE & other fans are controllable in one setting thanks for ARCTICs PST (PWM Sharing Technology) to keep the overall noise level minimal yet the cooling performance as needed. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. 4x Longer Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports ONE is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 88 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

High Performance CPU Cooler The Freezer 33 e Sports ONE is a powerful Tower CPU cooler equipped with our new Bioni X Fan. Thanks to a newly developed thermal coating & our new Bioni X F120 fan the cooler gives you top notch performance for CPUs with a TDP up to 200 W. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 e Sports ONE heatpipes does not cover the full protection cap, but, more importantly, is right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Wide Range of Regulation With the range of 200 to 1800 RPM the fan of the Freezer 33 e Sports ONE & other fans are controllable in one setting thanks for ARCTICs PST (PWM Sharing Technology) to keep the overall noise level minimal yet the cooling performance as needed. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. 4x Longer Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. Optimal Compatibility Fast & easy to install & extremely reliable, the different mounting systems are compatible with Intel & AMD sockets. Thanks to a backplate & a significantly lower weight compared to the i 30, the Freezer 33 e Sports ONE is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 88 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

Designed with Professional Gamers We designed the Freezer 33 PENTA with the professional German e Sport organisation PENTA Sports. The 120 mm PWM fan in PENTA design & a titanium black heatsink gives the cooler a fresh gaming look. Price-Performance Champ The Freezer 33 PENTA is based on the ARCTIC Freezer i 32 & Freezer A32, but features several improvements that boost performance & further reduce noise. Thanks to the award winning cooling performance, the Freezer 33 PENTA is the perfect gadget for PC enthusiasts & Gamers looking for an efficient & attractive solution for the CPU cooling. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 PENTA heatpipes does not cover the full protection cap, but, more importantly, are right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Semi Passive Cooling A sophisticated fan controller that was developed by German engineers allows passive cooling of the CPU during simple applications such as surfing & creating documents. If a higher cooling performance is needed for Gaming, the F 12 PWM fan starts up at a PWM signal with 40 % pulse width. This saves energy, extends the service life, makes the cooler at low load completely silent & delivers high performance for gaming. enhanced Heat Dissipation The Freezer 33 PENTA has off-centered heat pipes that disperse the heat in a more efficient way than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Optimal Compatibility Fast & easy to install & extremely reliable, the mounting system is compatible with Intel & AMD sockets. Also, the low footprint of the Freezer 33 PENTA avoids interference with the RAM, even if there are two fans used ensuring the best compatibility. Enhanced Bearing Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced & a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise & you can enjoy a longer service life of your cooler. Easy Installation & Safe Transportation Thanks to different mounting models for various sockets, a backplate & a significantly lower weight compared to the i 30, the Freezer 33 PENTA is not only fool-proof to install, but also absolutely transport safe. ...

Additional Fan for More Cooling Capacity Two low noise F12 PWM fans mounted on opposite sides of the radiator provide a great airflow. The first fan pushes air through the heatsink, the second fan pulls the air out of the heatsink. Price-Performance Champ The Freezer 33 Plus is based on the ARCTIC Freezer i 32 Plus, but features several improvements that boost performance & further reduce noise. Thanks to the award winning cooling performance, the Freezer 33 Plus is the perfect gadget for PC enthusiasts looking for an affordable solution for the CPU cooling. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 Plus heatpipes does not cover the full protection cap, but, more importantly, are right where the processor DIE is & cover even the largest versions (18 core) completely. This leads to maximum performance. Semi Passive Cooling A sophisticated fan controller that was developed by German engineers allows passive cooling of the CPU during simple applications such as surfing & creating documents. The 120 mm fans only start up at a PWM signal with 40 % pulse width. This saves energy, extends the service life & makes the cooler at low load completely silent. enhanced Heat Dissipation The Freezer 33 Plus has off-centered heat pipes that dispense the heat in a more efficient than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Optimal Compatibility Fast & easy to install & extremely reliable, the mounting system is compatible with Intel & AMD sockets. Also, the low footprint of the Freezer 33 Plus avoids interference with the RAM, even if there are two fans used ensuring the best compatibility. Enhanced Bearing Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced & a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise & you can enjoy a longer service life of your cooler. Easy Installation & Safe Transportation Thanks to different mounting models for various sockets, a backplate & a significantly lower weight compared to the i 30, the Freezer 33 Plus is not only fool-proof to install, but also absolutely transport safe. ...

Price-Performance Champ The Freezer 33 TR is an updated version of our award-winning Freezer 33 & specially designed for the new AMD Ryzen Threadripper CPU. The base of the heatsink has been enlarged to fit the massive AMD Socket TR4 &, equipped with a Bioni X F120 fan, it pushes the cooling performance further to cope with the 180 W TDP of the AMD Ryzen. The Freezer 33 TR is the perfect CPU cooling solution for enthusiasts who want to build High-End Desktop Computer on a budget. Maximum Quietness, Minimum Vibration Extremely quiet operation through a newly developed motor guarantees long sessions without annoying noise. ARCTICs new motor of the Bioni X Fans eliminates vibrations directly at its source, in particular at the motor. The ARCTIC motor absorbs 95 % of vibrations compared to a conventional DC motor. Thus, there is no need for rubber spacers due to the steady torque & smoother switching of the magnet field. Maximum Performance for Highest-End CPUs The contact surface of the Freezer 33 TR heatpipes does not cover the full protection cap, but, more importantly, are right where the processor DIE is & cover even the largest versions (16 core) completely. This leads to maximum performance. Wide Range of Regulation With the range of 200 to 1800 RPM the Bioni X F120 fan of the Freezer 33 TR is controllable with the Patented PWM Sharing Technology to regulate the fan speed as needed. Extended Life Span 10 °C lower motor temperature doubles the life span. The Bioni X gaming fans have a four times longer service life through low coil temperature. Therefore, we extend the warranty to 10 years. enhanced Heat Dissipation The Freezer 33 TR has off-centered heat pipes that dispense the heat in a more efficient way than the centered ones of its predecessors. Also, the layout of the 49 aluminium fins creates micro vortices that boost the airflow & circulate it around the heatpipes. Thermal Coating A newly developed thermal coating creates micro-turbulences with a special surface structure. Combined with offset heat pipes this leads to an optimised heat-dissipation & to an increased cooling performance. Enlarged base for AMD Threadripper The Freezer 33 TR is specifically designed for the new AMD Ryzen Threadripper s TR4 Processor & delivers extremely quiet cooling for High-End Desktop Computers. Enhanced Bearing Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced & a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise & you can enjoy a longer service life of your cooler. Easy Installation & Safe Transportation Thanks to different mounting models for various sockets, a backplate & a significantly lower weight compared to the i 30, the Freezer 33 TR is not only fool-proof to install, but also absolutely transport safe. Unlimited RAM Compatibility Thanks to the compact

Dimensions of only 123 mm x 150 mm x 80 mm, there are no restrictions when using RAM modules. Even RAM modules with larger heat sinks can be mounted without any issues & are not blocked by the CPU Cooler.

...

Good cooling performance A 92mm PWM fan, 45 fins, 3 double-sided copper heatpipes in combination with pre-applied MX-2 high performance thermal compound provide excellent cooling performance & enhanced heat transfer from the CPU. In a test conducted by Kitguru, the Freezer 7 PRO Rev.2 successfully reduces the CPU core temperature of an Intel Core i 7 920 by 16.5 degrees. Low noise Its low noise impeller & patented fan holder ensures the fan to work quietly under full load. Thanks to the PWM control, the fan speed adjusts according to the CPU temperature & thus the noise level remains at an absolute minimum which qualifies it as a silent cooler. Wide & multi-compatibility The Freezer 7 PRO Rev.2 features multi-compatibility with AMD & Intel sockets the Freezer 64 PRO features wide compatibility with AMD sockets. Its simple mounting system is designed to fit all current CPUs. The Freezer 7 PRO Rev.2 is compatible with AMD sockets FM2, FM1, AM3 +, AM3, AM2 +, AM2, 939, 754; Intel Sockets 1366, 1150, 1151, 1156, 1155 & 775. Easy installation Installation is a breeze with the Freezer 7 Pro Rev.2. The quick & easy mounting system provides excellent stability & it takes just a few minutes to mount the cooler to the motherboard. Thanks to the pre-applied MX-2 high performance thermal compound, a quick & clean installation is guaranteed! Multiple Mounting Directions In fact, you want to get the exact airflow you need. Freezer 7 PRO Rev.2: 4 (all) directions for Intel sockets; 2 directions for AMD sockets. ...

The Freezer 7 Pro Rev. 2 is the upgraded version of the renowned Freezer 7 Pro. With the flexible mounting design, this version is compatible with the Intel Core i 7, Core i 5, as well as AMD Socket AM3. Featuring an ultra-quiet 92 mm. fan & 6 heat pipes, the Freezer 7 Pro Rev. 2 is one of the most efficient & quiet CPU coolers for power users.

Features: Patented vibration absorption to eliminate buzzing sounds. Easy Installation. Ultra quiet 92 mm. PWM fan. Pre-applied MX-2. Excellent cooling performance: 130 Watts, 6 heat pipes & 42 fins for efficient heat dissipation. Compatible with Intel Core i 7 & Core i 5.

...

Arctic Freezer A32 Cpu Cooler With 120mm Fan Thanks to the better cooling performance of 320 Watts, the Freezer A32 is the perfect gadget for PC enthusiasts looking for a keen solution for the CPU cooling. Despite lower weight & size, we could improve not just the manufacturing quality, but also the thermal performance due to a fully automatic production process. The ARCTIC F12 fan is well known for high airflow at a comfortable noise level & thus this cooler won't be disturbing even at maximum CPU load. The real improvement is the motor & controller. Our German engineers made this fan work at lower speed when performance is not needed. Often motherboards don't provide PWM signals below 40% & thus make coolers unnecessary loud
- not so with the Freezer A32. Due to a new alloy/lubricant combination developed in Germany, the friction within the bearing is reduced & a greater efficiency is achieved. This way, there is less heat development as well as less bearing noise & you can enjoy a longer service life of your cooler. The lower footprint of the Freezer A32 avoids interference with the RAM, even if there are two fans used. Product Features AMD Socket: FM2 (+), FM1, AM3 (+), AM2 Max. Cooling Capacity: 320 Watts Recommended for TDP up to: 150 Watts Product Specifications CPU Types Compatible CPU Types FM2 (+), FM1, AM3 (+), AM2 Socket FM2 (+), FM1, AM3 (+), AM2 Fan Fan Diameter 120 mm Fan Bearing Type Fluid Dynamic Fan Speed 1, 000 to 1, 350 RPM Cooling Capacity 320 Watts Fan Speed Controller Connector 4 pin with PWM Voltage 12 V Current 0.2 Amps Physical Form Factor CPU Cooler

Dimensions 13.0 cm (W) x 10.0 cm (D) x 15.7 cm (H)
- Weight 0.772kg Warranty 6 Years Warranty



...

Superior Cooling Perfomance An interchangeable 120 mm PWM fan in combination with 4 direct touch heatpipes & a 48-fin heatsink enable the Freezer i 30 CO to deliver outstanding cooling performance & improve heat dissipation from the CPU. According to the test results from Hardware Secrets, its superior cooling performance surpassed the stock cooler & similar models by up to 34 degrees. Low Noise The test in Tom's Hardware has shown that the Freezer i 30 CO is the quietest cooler in their roundup. Thanks to the PWM control, the fan speed adjusts according to the CPU temperature & thus the noise level remains at an absolute minimum which qualifies it as a silent cooler. Click here to see how the PWM control settings can be changed according to your performance & noise preference. Sturdy Mounting Mechanism There is no need to worry about the weight of this muscular, yet gentle cooler. The Freezer i 30 CO is using a durable steel mounting clip & comes with a bundled back-plate*. As a result it has an excellent mounting stability & is fully transport-proof. * For Socket 2011, it is compatible with the existing back-plate Direct Touch Heatpipe Heatsink The Freezer i 30 CO heatsink consists of 4 double-sided direct touch heatpipes, 8mm in diameter. A patented process (20 2011 000 71.8) allows us to pack the heatpipes without gaps & thus increase the contact surface & achieve better flatness by precision machining
- both leading to an enhanced heat transfer. Continuous Operation "CO" stands for Continuous Operation & makes the cooler suitable for PCs with non-stop operation like servers. The Japanese dual ball bearing used in the "CO" fan reduces rotational friction considerably, is significantly less sensitive to dust & high temperature & hence up to 5 times more durable than other bearings. Compatibility Intel Socket: 2011, 1150, 1155, 1156 Max. Cooling Performance: 320 Watts Heatsink Direct Touch heatpipe & Oslash; 8 mm x 4 (double-sided) Aluminum fins x 48 (Thickness: 0.5 mm) Fan Diameter: 120 mm Fan Speed: 400
- 1, 350 RPM (Controlled by PWM) Airflow: 74 CFM / 125.7 m&sup 3;/h Noise Level: 0.3 Sone @ 1, 350 RPM Current / Voltage: 0.24 A / 12 V Power Consumption: 2.64 Watts

...