Most small chassis users find it difficult to buy a suitable cooler replacement that fits the size of their PC case. Freezer 7 LP, a cutting edge Intel CPU cooler especially designed for media centre users to fulfill their needs. Main

Features: Dual Heatpipes Design Optimized Heatsink Design for Low Profile Intel Systems 80 mm PWM Fan Patented Fan Holder eliminates the Humming Noise Pre-applied High Performance Thermal Compound Easy Installation via Push Pins Light Weight, Transport Save Slim Beauty The revolutionary heatsink design of the Freezer 7 LP reduces the size of the cooler dramatically, leaving it o­nly 40mm slim (to the air intake level) & 263g light, almost half the weight of usual CPU coolers. With this ultra thin dimension, the Freezer 7 LP easily fits into any small chassis with limited space. Freeze & Breeze Apart from its lightweight & low profile design, the Freezer 7 LP also performs excellent cooling execution. Two heatpipes, 40 fins & an 80mm PWM fan dissipate heat from the CPU core efficiently & rapidly. Together with the highly thermal conductive pre-applied MX-2 thermal paste & voltage regulator cooling, the Freezer 7 LP is 20% cooler (thermal resistance) than the generic E8500 low profile cooler, giving media centre users an unexpected cooling experience. The Art of Silence Like other ARCTIC COOLING products, low noise impellers & patented fan holder are used to minimize the noise level. Even though spinning at full load, the Freezer 7 LP generates o­nly 0.5 Sone of noise – 71% quieter than the Intel low profile cooler. Dimension
- 109 L x 108 W x 42 H (to air intake level) / 53 H (with fan holder) mm Weight
- 263g Fan
- 80 mm x 1 Fan Speed
- 600 &711;V 2000 RPM (controlled by PWM) Air Flow
- 28 CFM / 47.6 m 3/h Maximum Cooling Capacity
- 90 Watt







...

Compatible with Intel Core i 7 & Core i 5, as well as AMD sockets Excellent cooling performance
- 130 Watts Ultra quiet 92mm PWM
...

Arctic Cooling Freezer A11 Cpu Cooler enhanced where it counts Based on the Freezer 7 Pro, the Freezer A11 has been enhanced airflow, cooling performance, noise level & transport-proofness. Whether you are an expert at installing electronics or this is your first time; the Freezer i 11 is just a few minutes away from being installed. Airflow Reinvented Fluidic analysis & long testing hours allowed us to push the fan efficiency boundary further. This is leading to greater airflow & cooling at lower noise level; which not only mutilates the stock cooler performance but also leaves our Freezer 7 Pro far behind Virtually Silent PWM control & efficient cooling allow a very low fan speed & thus a silent cooler without the worry of an overheating CPU. Rubber spacers between fan & heatsink eliminate any rattle or vibration sound. Multi-directional mounting Extremely versatile to fulfil your preference on the airflow pattern within the PC case, you can mount the Freezer A11 in any way you want to get the exact airflow you need. Compatibility AMD Socket: FM2, FM1, AM3+, AM3, AM2+, AM2 Max. Cooling Capacity: 150 Watts Recommended for TDP up to: 130 Watts Heatsink Direct Touch heatpipe & Oslash; 6 mm x 3 (double-sided) Aluminum fins x 45 (Thickness: 0.4 mm) Fan Diameter 92 mm Fan Speed: 500
- 2, 000 RPM (Controlled by PWM) Airflow: 74 CFM / 125.7 m&sup 3;/h Noise Level: 0.3 Sone Current / Voltage: 0.16 A / +12V DC Warranty 6 Years Limited Warranty
...

Based on the Freezer 7 Pro, the Freezer i 11 has been enhanced airflow, cooling performance, noise level & transport-proofness. Whether you are an expert at installing electronics or this is your first time; the Freezer i 11 is just a few minutes away from being installed. Airflow Reinvented Fluidic analysis & long testing hours allowed us to push the fan efficiency boundary further. This is leading to greater airflow & cooling at lower noise level; which not only mutilates the stock cooler performance but also leaves our Freezer 7 Pro far behind. Virtually Silent PWM control & efficient cooling allow a very low fan speed & thus a silent cooler without the worry of an overheating CPU. Rubber spacers between fan & heatsink eliminate any rattle or vibration sound. Multi-directional mounting Extremely versatile to fulfil your preference on the airflow pattern within the PC case, you can mount the Freezer i 11 in any way you want to get the exact airflow you need. Compatibility Intel Socket: 1150, 1155, 1156, 2011, 2011-3 Max. Cooling Capacity: 150 Watts Heatsink Direct Touch heatpipe & Oslash; 6 mm x 3 (double-sided) Aluminum fins x 45 (Thickness: 0.4 mm) Fan: Diameter 92 mm Fan Speed: 500
- 2, 000 RPM (Controlled by PWM) Airflow: 74 CFM / 125.7 m&sup 3;/h Noise Level: 0.3 Sone Current / Voltage: 0.16 A / +12V DC
...

The Freezer i 30 is an enthusiast-grade CPU cooler for the latest Intel socket 2011, as well as socket 1155 & 1156. Patented technologies, direct touch heatpipes, precision machining, a fan vibration absorption & a brand new mounting system offers you plenty of overclocking headroom at a minimal noise level. Direct Touch Heatpipe Heatsink The Freezer i 30 heatsink consists of 4 double-sided direct touch heatpipes, 8mm in diameter. A patented process (20 2011 000 71.8) allows us to pack the heatpipes without gaps & thus increase the contact surface & achieve better flatness by precision machining “ both leading to an enhanced heat transfer. Efficient Heat Dissipation As a combined result of the 4 direct touch heatpipes, 48 Aluminum fins, an interchangeable 120 mm PWM Fan (ARCTIC F12 PWM), & the famous ARCTIC MX-4 thermal compound (included), the Freezer i 30 offers superior cooling performance with a maximum cooling capacity of 320 Watts & lots of headroom for overclocking. Max. Cooling Capacity
- 320 Watts Heatpipe
- Direct-Touch ˜ 8 mm x 4 (double-sided) Heatsink Material
- Aluminum fins x 48, thickness: 0.5 mm Fan (mm)
- ARCTIC F12 PWM: 120 mm, 400 “ 1, 350 RPM (PWM controlled) Airflow
- 74 CFM / 125.7 m&sup 3;/h Bearing
- Fluid Dynamic Bearing Noise Level
- 0.3 Sone (@1, 350 RPM) Current, Voltage
- 0.22A / 3.5
- 12V

Dimensions (Product)
- 100 (L) x 139 (W) x 161 (H) mm Net Weight
- 0.9kg












...

MX-2 is a high thermal conductivity & low thermal resistance compound for components that require optimum thermal dissipation. It is ideally suited for use in CPU, GPU cooling & other applications between power semiconductor components & heat sinks where thermal conductivity is a major factor. Since the MX-2 does not contain any metal particles, there are no problems regarding electrical conductivity or capacitance. Unlike other silver & copper compounds, MX-2 ensures that contact to electrical traces, pins & leads cannot result in any damage. With MX-2 no curing & no bleeding of the compound are possible. In contrast to other products, this compound does not show decreasing performance over time, does not need to be reapplied & has a durability of at least 8 years. Viscosity (poise) 850 Density (g/cm&sup 3;) 3.96 UPC 1.5g: 0872767004832 4g: 0872767002081 8g: 0872767003774 30g: 0872767002227 65g: 0872767003170

Dimensions (Packaging) 4g: 160 L x 110 W x 20 H mm Net Weight 30g itemnumber ORACO-MX20001-BL UPC Gross Weight 0.13kg

...

ARCTIC MX-2 is the thermal compound offering high thermal conductivity & low thermal resistance to dissipate heat efficiently from CPU / GPU to the installed heatsink. Excellent Performance The ARCTIC MX-2 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat from the CPU or GPU can be dissipated quickly & efficiently. With its performance, the ARCTIC MX-2 outperforms other well-known thermal compounds in the market. Safe & Easy Application As the ARCTIC MX-2 does not contain any metallic particles so electrical conductivity will not be an issue. Unlike other silver & copper compounds, the ARCTIC MX-2 ensures that contact with any electrical pins would not result in any sort of damage. Moreover the ARCTIC MX-2 is very easy to apply as it has ideal consistency. High Durability In contrast to metal & silicon thermal compound, the ARCTIC MX-2 does not show decreasing performance over time. It does not need to be re-applied & has a durability of at least eight years. ...

Easy to Apply With an ideal consistency, the MX-2 thermal compound is very easy to use, even for beginners Excellent Performance The ARCTIC MX-2 compound is composed of carbon micro-particles which lead to an extremely high thermal conductivity. It guarantees that heat generated from the CPU or GPU is dissipated quickly & efficiently, even suitable for overclocking. superb in performance, MX-2 ranks among the top thermal compound, thermal paste or thermal grease in the market. Safe Application It does not contain any metallic particles so electrical conductivity would not be an issue. Unlike silver & copper compound, it ensures that contact with any electrical pins would not result in damage of any sort. High Durability In contrast to metal & silicon thermal compound, the performance of MX-2 does not compromise over time. Once applied, you do not need to apply it a second time as it will last over 8 years. ...

High Performance Thermal Compound for the Enthusiast MX-2 is a high thermal conductivity & low thermal resistance compound for components that require optimum thermal dissipation. It is ideally suited for use in CPU, GPU cooling & other applications between power semiconductor components & heat sinks where thermal conductivity is a major factor. Main

Features: High Thermal Conductivity Low Thermal Resistance Non-Electrical Conductive Non-Capacitive Non-Curing Non-Corrosive No Bleeding Odorless Safe to apply anywhere Since the MX-2 does not contain any metal particles, there are no problems regarding electrical conductivity or capacitance. Unlike other silver & copper compounds, MX-2 ensures that contact to electrical traces, pins & leads cannot result in any damage. Durability With MX-2 no curing & no bleeding of the compound are possible. In contrast to other products, this compound does not show decreasing performance over time, does not need to be reapplied & has a durability of at least 8 years.

...

The ARCTIC MX-4 is a new thermal compound that guarantees exceptional heat dissipation from components & maintains the needed stability to push your computer system to its maximum. The ARCTIC MX-4 continues to be the overclocker's ultimate choice when choosing thermal compound. The ARCTIC MX-4 is composed of carbon micro-particles that lead to an extremely high thermal conductivity. It guarantees quick & efficient dissipation of heat from the CPU or GPU. The ARCTIC MX-4 is a metal-free & non-electrically conductive compound that eliminates the risks of short circuit & provides protection to your computer. Application is very easy as the consistency is just ideal for application on chips. With the competitive pricing of the ARCTIC MX-4, the performance of the ARCTIC MX-4 is the best thermal compound on the market. Thermal Conductivity (W/mk) 8.5 Viscosity (poise) 870 Density (g/cm&sup 3;) 2.5 UPC 4g: 0872767003767

Dimensions (Packaging) 4g: 160 L x 110 W x 20 H mm

...