For the Replacement Battery please see Quick Find 240335. Features Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. High frequency design Reduces or eliminates bulky transformers resulting in lighter units for ease of handling. Auto recognition of external batteries UPS recognizes when external battery packs are attached & automatically adjusts runtime. Predictive replace battery date Dynamically provides the month & year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. Multiple switched outlet groups Multiple outlet groups that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. Single switched outlet group Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off & non-critical load shedding. High online efficiency Reduces utlility costs, generates less heat. EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation. Smart Slot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Scalable runtime Allows additional run time to be quickly added as needed. Rack/ Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Plug-&-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Availability Boost & Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low & high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Disconnected battery notification Warns when a battery is not available to provide backup power. Manageability Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. LED status indicators Quickly understand unit & power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB (Universal Serial Bus) connectivity Provides management of the UPS via a USB (Universal Serial Bus) port (not available on all models). Disconnected battery notification Warns when a battery is not available to provide backup power. Serviceability User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers Enables a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Adaptability Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment.
Includes:: CD with software, Documentation CD, Installation guide, Removable support feet, Smart UPS signalling RS-232 cable, User Manual Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.
...

High density, double-conversion on-line power protection with scalable runtime. A battery failure notification provides early-warning fault analysis on batteries enabling timely preventive maintenance. ECO Mode by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection. Text & mimic diagrams display modes of operation, system parameters, & alarms. ...

APC SRT1500RMXLI. UPS topology: Double-conversion (Online), Output power capacity: 1500 VA, Output power: 1500 W. Serial interface type: RJ-45. Battery technology: Sealed Lead Acid (VRLA), Battery life (max): 5 year (s), Battery recharge time: 3 h. Form factor: Rackmount, Product

Colour: Black, Cable length: 1.83 m.

Width: 432 mm,

Depth: 505 mm,

Height: 85 mm High density, double-conversion on-line power protection with scalable runtime
Includes:: CD with software, Comms cable, Documentation CD, Installation guide, Rack Mounting brackets, Rack mounting hardware, Rack Mounting support rails, USB (Universal Serial Bus) cable, Warranty card Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection LCD graphics display Text & mimic diagrams that display modes of operation, system parameters & alarms. Rack/ Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature. Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Scalable runtime Allows additional run time to be quickly added as needed. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. LED status indicators Quickly understand unit & power status with visual indicators. Serial connectivity Provides management of the UPS via a serial port. Infra Stru Xure Manager Compatible Enables centralized management via the APC Infra Stru Xure Manager. Smart Slot Customize UPS capabilities with management cards. Network manageable Provides remote power management of the UPS over the network. Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Plug-&-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Rack/ Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades & replacements of the batteries reducing Mean Time to Repair (MTTR) Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predictive failure notification. Provides early-warning fault analysis ensuring proactive component replacement. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power & UPS power conditions Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Cold-start capable Provides temporary battery power when the utility power is out. Frequency & voltage regulation Gives higher application availability by correcting poor frequency & voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, & other power disturbances. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Input power factor correction Minimizes installation costs by enabling the use of smaller generators & cabling. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)








...

PC by Schneider Electric Easy UPS SRV2KRIRK Dual Conversion Online UPS
- 2 k VA/1.60 k W
- Rack-mountable
- 230 V AC Input
-



...

APC by Schneider Electric Easy UPS UPS Battery Pack
- Lead Acid
- Maintenance-free/ Sealed/ Leak Proof Easy UPS On-Line High

...

Infra Stru Xure Central provides an efficient way for organizations to monitor their company-wide multi-vendor physical infrastructure: power, cooling, security, & environment. Real-time monitoring, user-defined reports & graphs, & instant fault notification & escalation enable quick assessment & resolution of critical infrastructure events that can adversely affect IT system availability. This centralized repository of critical information can be accessed by multiple users from anywhere on the network, creating a consolidated view of the physical infrastructure. ...

APC SUA24XLBP Smart-UPS XL 24V Battery Pack
- External battery pack Lead Acid APC Smart-UPS XL protects your data by supplying
...

APC Smart-UPS XL protects your data by supplying reliable, network-grade power & scalable runtime. Typical applications requiring longer runtime include critical application servers & storage, IP & PBX based voice networks, & enterprise network switches & hubs. Included Power Chute management software provides IT administrators the comfort of safe system shutdown & advanced UPS management. Engineered with the same standards as the award-winning Smart-UPS, with over 10 million installed, the Smart-UPS XL adds the advantage of unsurpassed runtime capability for those business applications that demand continual uptime. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

APC sets the standard in its industry for quality, innovation & support. Its comprehensive solutions, which are designed for both home & corporate environments, improve the manageability, availability & performance of sensitive electronic, network, communications & industrial equipment of all sizes. The mission of APC is to improve the manageability, availability, & performance of information & communication systems through rapid development & delivery of innovative solutions to real customer problems. PRODUCT

Features: Cascading capabilities; Hot Pluggable Operation; Hot Swap Batteries; Intelligent battery management; Rack Mount. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

APC sets the standard in its industry for quality, innovation & support. Its comprehensive solutions, which are designed for both home & corporate environments, improve the manageability, availability & performance of sensitive electronic, network, communications & industrial equipment of all sizes. The mission of APC is to improve the manageability, availability, & performance of information & communication systems through rapid development & delivery of innovative solutions to real customer problems. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...