Easy Switched Rack Power Distribution Units (PDU) go beyond the average power strip & provide advanced power management & load monitoring of server rack & network rack solutions. Including remote on/off switching control of individual outlets for power cycling. Remote Individual Outlet Control Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment). Remote Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements. Vertical Mounting Capabilities Easily mounts vertically in racks or enclosures & occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a Net Shelter enclosures. Zero U Rack Mounting Abilities Vertical mounting capabilities allow users to mount the units in a rack or enclosure without expending valuable rack space. Network Management Capabilities Full-featured network management interfaces that provide standards-based management via Web, SNMP, & Telnet. Allows users to access, configure, & manage rack PDUs from remote locations to save valuable time. Associated with this feature is the ability to quickly & easily upgrade the firmware via network download to installed units for future product enhancements. Remote Individual Outlet Control Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime & avoid travel time to equipment). Flash Upgradeable Quickly & easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. Power Delays Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits & dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Local Current Monitoring Display The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. Network port sharing Allows four rack PDUs to be connected using In & Out ports so that only one network connection is necessary. ...

APC by Schneider Electric Line-interactive UPS
- 1 k VA/600 W
- 8 Hour Recharge
- 230 V AC Input
- 230 V AC Output
-




...

Automatic Voltage Regulation (AVR) Automatically steps up low voltage & steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations & mounting on wall or other surfaces. Battery & surge protected outlets Back up & protect your hardware & data during power outages, surges & spikes. Battery backup & surge protection Outlets provide abundant runtime for network gateway equipment & other critical low-power devices, allowing for hours of internet access during a power outage. Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps & battery damage due to low voltage situations. Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Cold-start capable Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulation (AVR) Preserves battery life & maximizes runtime by correcting low voltages without discharging the battery. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up & complement home decor. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Audible alarms Provides notification of changing utility power & UPS power conditions LED Indicators Provide easy-to-read status of the unit & utility power conditions. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. ...

Automatic Voltage Regulation (AVR) Automatically steps up low voltage & steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations & mounting on wall or other surfaces. Battery & surge protected outlets Back up & protect your hardware & data during power outages, surges & spikes. Battery backup & surge protection Outlets provide abundant runtime for network gateway equipment & other critical low-power devices, allowing for hours of internet access during a power outage. Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps & battery damage due to low voltage situations. Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Cold-start capable Provides temporary battery power when the utility power is out. Boost Automatic Voltage Regulation (AVR) Preserves battery life & maximizes runtime by correcting low voltages without discharging the battery. Sleek design Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up & complement home decor. Transformer-block spaced outlets Protect equipment with input transformer blocks without blocking access to other receptacles. Audible alarms Provides notification of changing utility power & UPS power conditions. LED Indicators Provide easy-to-read status of the unit & utility power conditions. Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. ...

Automatic Voltage Regulation (AVR) Automatically steps up low voltage & steps down high voltage to levels that are suitable for your equipment. Wall-mount holes Allow flexibility for setup in tight locations & mounting on wall or other surfaces. LED Indicators Provide easy-to-read status of the unit & utility power conditions. Audible alarms Provides notification of changing utility power & UPS power conditions Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. Advanced Safety Features Safeguard your Home UPS from overloads, excessive mains voltages, short circuits, installation mishaps & battery damage due to low voltage situations. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Battery & surge protected outlets Back up & protect your hardware & data during power outages, surges & spikes. Battery backup & surge protection Outlets provide abundant runtime for network gateway equipment & other critical low-power devices, allowing for hours of internet access during a power outage. ...

The APC by Schneider Electric Easy UPS offers power & surge protection for wireless networks, computers, gaming consoles, and other electronics in your home or business. This UPS supplies battery backup during outages & unstable voltage fluctuations, as well as provides protection from damaging surges & spikes. It helps protect your data & keep you connected. Automatic Voltage Regulation (AVR) Automatic Voltage Regulation boosts/trims the AC voltage when it drops/exceeds levels. This allows the equipment plugged into the unit to operate during low/high voltage conditions, conserving the battery power in the event of a power cut. The Easy UPS will switch to battery power if the input voltage level becomes too low/high for the Automatic Voltage Regulation to compensate, or if the AC power is distorted. Quick mute The Easy UPS is able to temporarily mute user-correctable audible alarms such as On battery. During such audible alarms, a short press (less than 2 seconds) of the power button will temporarily mute the audible alarm until the condition has been reset. A short double beep will confirm that Quick mute has been activated. ...

High quality, Double-conversion On-line UPS designed for essential power protection needs even in the most unstable power conditions
Includes:: CD with software, User Manual LCD graphics display Text & mimic diagrams that display modes of operation, system parameters & alarms. Smart Slot Customize UPS capabilities with management cards. Serial connectivity Provides management of the UPS via a serial port. LED Indicators Provide easy-to-read status of the unit & utility power conditions. Network manageable Provides remote power management of the UPS over the network. Intelligent battery management Maximizes battery performance, life, & reliability through intelligent, precision charging. USB (Universal Serial Bus) connection Use your PC to access additional power protection & management features for your UPS via a USB (Universal Serial Bus) Port. Allows the user to manage the UPS functions, schedule automatic shutdown & monitor the power grid occurrences through an interactive interface that ensures an easy & intuitive monitoring. Management Software Safety-agency approved Ensures the product has been tested & approved to work safely with the connected service provider equipment & within the specified environment. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics. ECO Mode Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection Double conversion on-line topology Guarantees a consistently high level of power quality. Any disturbances on the distribution waveform are regenerated via the zero transfer time AC to DC then DC to AC conversion process. The battery is only used as a back-up source. Intuitive LCD interface Provides clear & accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Wide input voltage range Designed for harsh electrical environments to save battery life. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Input power factor correction Minimizes installation costs by enabling the use of smaller generators & cabling. High efficiency High efficiency rates that remain stable even at lower operating power levels Management Software means that you can easily monitor your utility power & manage your UPS. Smart Slot Customize UPS capabilities with management cards.
...

With innovations such as the S-One connector, the sliding 19"patch panels & the CL-MX cable, Actassi means that you can work faster:installation time will be decreased by up to 20%, still high-performing network cabling is ensured. The S-One connector is up to 50% faster to connect, and the pre-term fiber is up to three times faster to install. ...

Automatically steps up low voltage & steps down high voltage to levels that are suitable for your equipment Provides temporary battery power when the utility power is out Text & mimic diagrams display modes of operation, system parameters & alarms Pure sine wave output simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers & sensitive electronics Slim, modern design can be upright, flat, or wall-mounted to comfortably fit any electronics set-up & complement home decor Transformer-block spaced outlets protect equipment with input transformer blocks without blocking access to other receptacles Outlets provide abundant runtime for network gateway equipment & other critical low-power devices, allowing for hours of Internet access during a power outage Back up & protect your hardware & data during power outages, surges & spikes ...

For IT professionals in small to medium businesses, Easy UPS Online provides basic power protection for unstable power conditions, ensuring consistent & reliable connectivity at the most critical moments. APC Easy UPS Online is a versatile, high quality, cost competitive UPS developed to handle a wide voltage range, and inconsistent power conditions;delivering the quality millions of IT professionals trust around the world. That's Certainty in a Connected World. Scalable runtime The capability to add external battery packs to provide extended runtime, fulfilling the needs of long run time applications. ECO mode/green mode This is an energy saving mode & the input voltage regulation range can be set/ modified through the LCD display. Generator compatible Ensures clean, uninterrupted power to the loads in the event of an extended power outage. Intelligent battery management Maximizes battery performance, life, and reliability through intelligent precision temperature compensated charging. OVCD (Overvoltage Cutoff Device) protection Under special application with high voltage condition, OVCD protection will prevent the damage of UPS components & extend the life of the UPS. Input power factor connection Minimizes installation costs by enabling the use of smaller generators & cabling. Excellent power quality & performance True double conversion
- provides tight voltage & frequency regulation & zero transfer time for reactive loads (machinery, lab equipment, etc.). Built-in automatic bypass Ensures seamless power to the load even in the event of catastrophic UPS failure. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances.
...