The AT-2712FX network interface card is an ideal fit for fiber to the desktop networks that depend on secure & reliable systems. With a small form factor PCIe x 1 bus the AT-2712FX is an ideal fit for government, education or other networks dependent on highly secure capabilities. ...

Compared to other fiber adapters in the marketplace, which support Wake on LAN (WOL) on either PCI 2.1 or PCI 2.2 systems but not both, these NICs support internal WOL feature through the PCI 2.2 bus, & have the capability to support PCI 2.1 WOL feature by using the external cable. The AT-2746FX is resistant to signal degradation, snooping & interference, & is ideal for networks that require protection from electrical interference or where security is a concern. The small footprint makes these products a perfect choice for PCs equipped with small desktop solutions. The AT-2746FX onboard Managed Boot Agent (MBA) provides a wide set of industry-standard boot protocols, including PXE, Net Ware NCP/IPX, IBMs RPL, traditional DHCP & BOOTP, supporting both BBS (BIOS Boot Specification) & non-BBS compliant PCs. It also

Includes:: an extensive set of utilities for boot ROM configuration, & access to Pre-OS & network boot image files. Please note: server components such as memory & power supplies must match those already installed in a server. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

Allied Telesis AT-2801FX PCMCIA Card is designed to provide laptops/notebooks with network connections through high speed fiber-optic link via 32-bit PCMCIA interface. Compliant with all relevant industry standards, AT-2801FX card features an ST or SC fiber connection, & supports a wide range of operating systems. Allied Telesis AT-2801FX comes with a variety of reliability features. The single-piece, integrated design makes it deal for mobile applications AT-2801FX can endure frequent usage with no damage to the fiber connectors. These features make AT-2801FX the desired solutions for military & government usage. Allied Telesis AT-2801FX adapter cards come with a set of software programs that can greatly assist users with their network setups & configurations. The offline user diagnostics program provides system administrators & engineers with a profound tool to analyze the network adapter & check specific data. The AT-Setup program provides user an easy time in controlling & configuring all their AT-2801FX adapters. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Allied Telesis'AT-2916SX is a high reliable 32-bit PCI Gigabit Fiber Adapter card with 9KB Jumbo frames support for network upgrade needs.AT-2916SX helps to boost your Fast Ethernet desktop throughput ten times to 2000 Mbps. With the 1000 Base-SX fiber-optic connection, data transmission is both secure & faster. In order to reduce CPU usage, Allied Telesis' AT-2916SX uses the adaptive interrupts & ultra-deep 96-KB packet buffer. Coupled with link aggregation & load balancing, AT-2916SX achieves the best performance of its class for desktop connectivity. ...

Allied Telesis'AT-2916SX is a high reliable 32-bit PCI Gigabit Fiber Adapter card. It helps to boost your Fast Ethernet desktop throughput ten times to 2000 Mbps. With the 1000 Base-SX fiber-optic connection, data transmission is both secure & faster. In order to reduce CPU usage, Allied Telesis' AT-2916SX uses the adaptive interrupts & ultra-deep 96-KB packet buffer. Coupled with link aggregation & load balancing, AT-2916SX achieves the best performance of its class for desktop connectivity. ...

PRODUCT
Features: Virtual LANs with 802.1Q VLAN tagging, load balancing & priority queuing for network optimization CPU
...

The AT-6101 Power over Ethernet (Po E) injector provides data & power through the Ethernet cable to Po E capable devices such as wireless access points, IP cameras, Vo IP phones & other devices that support the IEEE 802.3af standard. Save money by using the AT-6101 Po E injector to remotely power Vo IP phones, IP cameras, wireless access points & any other Po E powered device. There is no need for additional power cabling. The AT-6101 feeds power to the equipment through the same cable used for data. Connecting the AT-6101 to a UPS protected power line helps protect the powered device from power outages. The AT-6101 Po E injector also helps protect your network investment. You wont need to replace the existing LAN infrastructure to connect Po E enabled devices. ...

As a member of the 8000S family the 8000S/16 is a low cost managed Fast Ethernet switch with a 1RU form factor. The 8000S/16 is an ideal choice for small environments or workgroups. A managed Fast Ethernet switch with a SFP expansion bay the 8000/16 is ready to meet the essential networking needs of any small network & offers an extensive set of management features for a customized fit in the network. ...

One of a series of stackable switches from Allied Telesis, the AT-8000S/48 provides high performance Layer 2 switching in an affordable fixed configuration platform. This switch offers 48 10/100 ports, two fixed 1 Gbps SFP slots plus two integrated stacking connectors that deliver a total of 4 Gbps stacking bandwidth. The stacking capability integrated into this platform is configured as a resilient ring topology designed to provide high reliability & simplified management for higher port density applications. Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The AT-9000/28 provides high performance layer 2 switching at an affordable fixed configuration platform. The switch brings advanced enterprise features to a more affordable level while supporting the changing needs of the SMB market space to improve the delivery of converged data. Support for jumbo Ethernet frames enables higher throughput of time sensitive data. Features 28 active Gigabit Ethernet ports 4 x SFP combo ports support 100 & 1000 Mbps operation fiber SFPs Near silent operation 1RU form factor, rack & wall mountable Lower power operation – eco friendly Non-blocking wirespeed Layer 2 switching Management (WEB, CLI, SNMP) Industry standard CLI interface Port mirroring Spanning Tree (STP), Rapid Spanning Tree (RSTP) support Support for 255 active VLANs from 0~4096 VID range Qo S for multimedia voice & data IEEE 802.3ad LACP Support IEEE 802.1x & RADIUS client support Double VLAN Tagging (Q-in-Q) ...