Aerocool X-Predator II Black Full Tower Gaming Case (No PSU) Description Continuing the success of the X-Predator case, X-Predator II carries on the legacy of its predecessor. X-Predator II conserved the distinct shell-like ventilation design on the top penal with a switch provided to open/close the vent when necessary. X-Predator II now provides more USB (Universal Serial Bus) ports than the former version & with an extra HDD docking bay that was not available before. There is also an upgrade on the number of HDDs it can carry. The X-Predator can carry from 6 HDDs to 8 HDDs. For those who love the X-Predator case, now is the time for the new X-Predator II! Key Features superb gaming case solidly built with 1.0mm steel aimed for great airflow performance. Top panel also supports the installation of either a 240mm or 280mm water-cooling system Supports high
- end graphic cards up to 465mm Supports max. CPU cooler height of 170mm Supports max. PSU length of 220mm Removable PSU dust filter for easy cleaning Shock-proof rubber for PSU Pre-drilled holes with rubber gromets for cable management to reduce cable mess Supports up to 8 x 3.5" HDD or 8 x 2.5" HDD/SSD installation with HDD trays 4 x USB (Universal Serial Bus) 2.0 / 2 x USB (Universal Serial Bus) 3.0 / HD Audio + Mic Large acrylic side window for clear viewing of chassis interior

Includes:: 1 x external HDD docking on top panel for easy access

Includes:: two fan controllers each controls fan/s up to 7W Specifications Form Factor: Full Tower Motherboard Support: ATX, Micro ATX, Extended ATX, Mini ITX PSU Support: Standard ATX PSU Location: Bottom Gaming Case: Yes Water Cooling: Water Cooling Ready! Grommeted Pipe Holes: 4 Supported Radiator

Size: 240mm Supported Radiator Positions: Top Body

Material: 1.0mm SECC Metal Front Bezel

Material: Plastic Side Panel: Window Internal Cable Management

Depth: 253mm External Bays: 3 x 5.25 External Internal Bays: 8 x 3.5 Internal 8 x 2.5 Internal Drive Bay Notes: 8 x 2.5" bays uses 8 x 3.5" bays Expansion Slots: 10 x Full Size Cooling Front: 2 x 14cm LED Fans Cooling Top: 2 x 14cm Fans Cooling Rear: 1 x 14cm Fans Cooling Side: None Cooling Bottom: Space for 1 x 12/14cm Fan (Not Included) Fan Controllers: 2 Fan Controllers, controlling up to 4 fans in total IO Ports: 2 x USB (Universal Serial Bus) 3.0 4 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone GPU Max Length: 342mm CPU Cooler Maximum

Height: 170mm Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features:

Includes:: 2 x Fan Controllers PSU Included: No






















...

Aerocool X-Predator II White Full Tower Gaming Case (No PSU) Description Continuing the success of the X-Predator case, X-Predator II carries on the legacy of its predecessor. X-Predator II conserved the distinct shell-like ventilation design on the top penal with a switch provided to open/close the vent when necessary. X-Predator II now provides more USB (Universal Serial Bus) ports than the former version & with an extra HDD docking bay that was not available before. There is also an upgrade on the number of HDDs it can carry. The X-Predator can carry from 6 HDDs to 8 HDDs. For those who love the X-Predator case, now is the time for the new X-Predator II! Key Features superb gaming case solidly built with 1.0mm steel aimed for great airflow performance Top panel also supports the installation of either a 240mm or 280mm water-cooling system Supports high
- end graphic cards up to 465mm Supports max. CPU cooler height of 170mm Supports max. PSU length of 220mm Removable PSU dust filter for easy cleaning Shock-proof rubber for PSU Pre-drilled holes with rubber gromets for cable management to reduce cable mess Supports up to 8 x 3.5" HDD or 8 x 2.5" HDD/SSD installation with HDD trays 4 x USB (Universal Serial Bus) 2.0 / 2 x USB (Universal Serial Bus) 3.0 / HD Audio+ Mic Large acrylic side window for clear viewing of chassis interior

Includes:: 1 x external HDD docking on top panel for easy access

Includes:: two fan controllers each controls fan/s up to 7W Specifications Form Factor: Full Tower Motherboard Support: ATX, Micro ATX, Extended ATX, Mini ITX PSU Support: Standard ATX PSU Location: Bottom Gaming Case: Yes Water Cooling: Water Cooling Ready! Grommeted Pipe Holes: 4 Supported Radiator

Size: 280mm Supported Radiator Positions: Top Body

Material: 1.0mm SECC Metal Front Bezel

Material: Plastic Side Panel: Window Internal Cable Management

Depth: 253mm External Bays: 3 x 5.25 External Internal Bays: 8 x 3.5 Internal 8 x 2.5 Internal Drive Bay Notes: 8 x 2.5" bays uses 8x 3.5" bays Expansion Slots: 10 x Full Size Cooling Front: 2 x 14cm LED Fans Cooling Top: 2 x 14cm Fans Cooling Rear: 1 x 14cm Fans Cooling Side: None Cooling Bottom: Space for 1 x 12/14cm Fan (Not Included) Fan Controllers: 2 Fan Controllers, controlling up to 4 fans in total IO Ports: 2 x USB (Universal Serial Bus) 3.0 4 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone GPU Max Length: 342mm CPU Cooler Maximum

Height: 170mm Front Bezel

Colour: White Body

Colour: Black/ White System Cabinet

Features:

Includes:: 2 x Fan Controllers PSU Included: No






















...

Finally, the cube styled case of the popular Aerocool gaming case model "XPredator" has hit the market. Not only it possesses the original XPredators look, it is also more compact & easier for transportation. This case was designed for everyone including heavy gamers who will find this case incredible for its excellent airflow performance & watercooling abilities. Features Super cube gaming case solidly built with 0.7mm Steel Unique side bar design to take the strength of chassis to the next level PSU bracket makes installation of PSU easier Largely increased airflow by mesh design of front & top panels Completely removable ODD rack for ease of installing water cooling system Most parts can be removed by screw drivers for personal molding needs Supports DUAL 240/280mm water cooling radiators Pre-drilled holes for water cooling tubes Supports internal 3x 3.5"HDD (also compatible with 2.5") & 2x 2.5"HDD/SSD under ODD rack Supports dual high-end graphic cards up to 320mm (345mm when front 20cm fan removed) Supports max. CPU cooler height of 190mm Supports all PSU lengths Super-silent 20cm fan & 14cm fan included for front & rear cooling Supports up to 1 x 20cm, 2x 12cm, or 2x 14cm fans on top panel Supports up to 1x 20cm, 2x 12cm or 2x 14cm fans on front panel (1x 20cm pre-installed) Supports up to 2x 12cm or 2x 14cm fans on rear panel (1x 14cm pre-installed) Magnetic PSU dust filter can be easily removed for cleaning HDD rack is double-secured by 2 screws to ensure the precious data don’t get damaged during transportation Shock-proof rubber pads for 3.5" HDDs & PSU 2x USB3.0/ HD Audio & MIC Separate fan positions for exhausting the heat from HDD & motherboard Large Acrylic window for clear viewing

Includes:: two fan controller knobs controls fan/s up to max. 15W/channel Specifications Form Factor: Micro ATX Motherboard Support: Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: No Dimensions: 280mm x 380mm x 350mm (W x H x D) Packaging Dimensions: 345mm x 490mm x 475mm (W x H x D) Body
Material: 0.7mm SGCC Front Bezel
Material: Plastic Side Panel: Window External Bays: 1 x 5.25” External Internal Bays: 3 x 3.5” Internal 5 x 2.5” Internal Drive Bay Notes: Hidden, Internal 3.5" HDD Tray & Under ODD rack Expansion Slots: 4 x Full Size Cooling Front: 120mm fan x 2 or 140mm fan x 2 or 200mm fan x 1 (1 x 200mm LED fan Included ) Cooling Top: 120mm fan x 2 or 140mm fan x 2 Cooling Rear: 120mm fan x 2 or 140mm fan x 2 (1 x 140mm Black fan Included ) Cooling Side: None Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 3.0 1 x HD Audio 1 x Microphone Front Bezel
Colour: Black/ Red Body
Colour: Black System Cabinet
Features:
Includes: 2 x Fan Controllers PSU Included: No Net Weight (KGs): KGs







...

X-Predator White Edition We are proud to announce Aero Cools first range of super tower cases
- the X-Predator. These massive gaming
...

Details: Aerocool Introduces The XPredator X1 For those who have dreamed of owning an XPredator case but never end up
...

Details: Aerocool Introduces The XPredator X1 For those who have dreamed of owning an XPredator case but never end up
...

X-Predator X3 Avenger Edition We are proud to announce Aerocools range of super tower cases
- the X-Predator X3, Avenger Edition.
...

Aerocool Introduces The XPredator X3 For those who have dreamed of owning an XPredator case but never end up getting one due to its sheer chassis size, now here is the good news: Aerocool has introduced the new XPredator X3.

Dimensions of the Different Cases (H x W x D) The original XPredators
- 600mm x 234mm x 555mm The XPredator X3
- 527mm x 223mm x 533mm The XPredator X1
- 482mm x 190mm x 475mm The XPredator X3 is a high-midi case & comes in three colors which are Evil Black Edition, Devil Red Edition & White Edition. Although it is smaller in size compared to the original XPredator, this chassis is still wide enough to accommodate a 20cm LED fan at the front panel. On the top panel, just like its predecessor, two fan controller knobs each can support up to 25W, far more advanced than the original one of only 10W per channel. Inside the chassis, you can mount up to 8 HDDs & there are 8 expansion slots plus a 310mm depth for high-end graphic cards installation. Both X1 & X3 are designed to look "within the family"
- the scale-like ventilation on the top panel can be opened & closed for better air flow regulation
- its distinct feature that can be seen in all XPredators. Key Features • Solidly constructed chassis interior (0.7mm SPCC) • Supports CPU cooler max. height up to 186mm (without fans on side panel) • Supports Long VGA Cards up to 310mm. •
Includes: 1 x 12cm Black fan at rear & 1 x 20cm LED fan in front. • Top panel flaps can be opened or closed to control air flow more efficiently. Dust filter for PSU. •
Includes: 1 x external 2.5" HDD docking on top panel for easy access. •
Includes: two fan controller knobs each controls fan/s up to 25W. • Install up to 9 fans! •
Includes: antivibration pads for HDDs & PSU. • Cable Routing Management holes with high-end rubber grommets to protect your cables. • USB3.0 >USB2.0 adaptor included. • Pre-drilled CPU holes for easy mounting & removable of CPU cooler. • Support water cooling. • 2 x USB3.0 & Audio/ Mic ports are easily accessible from top panel. Case Specifications • Form Factor: Midi Tower • Motherboard Support: ATX, Micro ATX, Mini ITX • PSU Support: Standard ATX • Gaming Case: Yes • Water Cooling Ready: Yes • Dimensions: 223mm x 527mm x 533mm (W x H x D) • Packaging Dimensions: 270mm x 589mm x 560mm (W x H x D) • Body
Material: 0.7/0.6 SECC • Front Bezel
Material: Plastic • Side Panel: Window / Vented • External Bays: 3 x 5.25” External • 1 x 3.5” External • Internal Bays: 8 x 3.5” Internal • 8 x 2.5” Internal • Drive Bay Notes: • Expansion Slots: 8 x Full Size • Cooling Front: 1 x 20cm Red LED fan included • Cooling Top: 1 x 20 or 2 x 12 or 2 x 14cm fans (Optional) • Cooling Rear: 1 x 12 or 14 cm fan (1 x 14cm Black fan included) • Cooling Side: 2 x 12 or 2 x 14 cm fans (Optional) • Cooling Bottom: 1 x 12 or 14cm fan (Optional) • IO Ports: 2 x USB (Universal Serial Bus) 3.0 • 2 x USB (Universal Serial Bus) 2.0 • 1 x HD Audio • 1 x Microphone • Front Bezel
Colour: Black/ Red Mesh • Body
Colour: Black • System Cabinet
Features:
Includes: 2 x Fan Controller knobs each support up to 25W • Removable & washable PSU dust filter • PSU Included: No • Net Weight (KGs): 8.66 KGs
















...

Aerocool Introduces The XPredator X3 For those who have dreamed of owning an XPredator case but never end up getting one due to its sheer chassis size, now here is the good news: Aerocool has introduced the new XPredator X3.

Dimensions of the Different Cases (H x W x D) The original XPredators
- 600mm x 234mm x 555mm The XPredator X3
- 527mm x 223mm x 533mm The XPredator X1
- 482mm x 190mm x 475mm The XPredator X3 is a high-midi case & comes in three colors which are Evil Black Edition, Devil Red Edition & White Edition. Although it is smaller in size compared to the original XPredator, this chassis is still wide enough to accommodate a 20cm LED fan at the front panel. On the top panel, just like its predecessor, two fan controller knobs each can support up to 25W, far more advanced than the original one of only 10W per channel. Inside the chassis, you can mount up to 8 HDDs & there are 8 expansion slots plus a 310mm depth for high-end graphic cards installation. Both X1 & X3 are designed to look "within the family"
- the scale-like ventilation on the top panel can be opened & closed for better air flow regulation
- its distinct feature that can be seen in all XPredators. Key Features • Solidly constructed chassis interior (0.7mm SPCC) • Supports CPU cooler max. height up to 186mm (without fans on side panel) • Supports Long VGA Cards up to 310mm. •

Includes:: 1 x 12cm Black fan at rear & 1 x 20cm LED fan in front. • Top panel flaps can be opened or closed to control air flow more efficiently. Dust filter for PSU. •

Includes:: 1 x external 2.5" HDD docking on top panel for easy access. •

Includes:: two fan controller knobs each controls fan/s up to 25W. • Install up to 9 fans! •

Includes:: antivibration pads for HDDs & PSU. • Cable Routing Management holes with high-end rubber grommets to protect your cables. • USB3.0 >USB2.0 adaptor included. • Pre-drilled CPU holes for easy mounting & removable of CPU cooler. • Support water cooling. • 2 x USB3.0 & Audio/ Mic ports are easily accessible from top panel. Case Specifications • Form Factor: Midi Tower • Motherboard Support: ATX, Micro ATX, Mini ITX • PSU Support: Standard ATX • Gaming Case: Yes • Water Cooling Ready: Yes • Dimensions: 223mm x 527mm x 533mm (W x H x D) • Packaging Dimensions: 270mm x 589mm x 560mm (W x H x D) • Body
Material: 0.7/0.6 SECC • Front Bezel
Material: Plastic • Side Panel: Window / Vented • External Bays: 3 x 5.25” External • 1 x 3.5” External • Internal Bays: 8 x 3.5” Internal • 8 x 2.5” Internal • Drive Bay Notes: • Expansion Slots: 8 x Full Size • Cooling Front: 1 x 20cm Orange LED fan included • Cooling Top: 1 x 20 or 2 x 12 or 2 x 14cm fans (Optional) • Cooling Rear: 1 x 12 or 14 cm fan (1 x 14cm Black fan included) • Cooling Side: 2 x 12 or 2 x 14 cm fans (Optional) • Cooling Bottom: 1 x 12 or 14cm fan (Optional) • IO Ports: 2 x USB (Universal Serial Bus) 3.0 • 2 x USB (Universal Serial Bus) 2.0 • 1 x HD Audio • 1 x Microphone • Front Bezel
Colour: Black/ Orange Mesh • Body
Colour: Black • System Cabinet
Features:

Includes:: 2 x Fan Controller knobs each support up to 25W • Removable & washable PSU dust filter • PSU Included: No • Net Weight (KGs): 8.66 KGs





















...

Aerocool Introduces The XPredator X3 For those who have dreamed of owning an XPredator case but never end up getting one due to its sheer chassis size, now here is the good news: Aerocool has introduced the new XPredator X3.

Dimensions of the Different Cases (H x W x D) The original XPredators
- 600mm x 234mm x 555mm The XPredator X3
- 527mm x 223mm x 533mm The XPredator X1
- 482mm x 190mm x 475mm The XPredator X3 is a high-midi case & comes in three colors which are Evil Black Edition, Devil Red Edition & White Edition. Although it is smaller in size compared to the original XPredator, this chassis is still wide enough to accommodate a 20cm LED fan at the front panel. On the top panel, just like its predecessor, two fan controller knobs each can support up to 25W, far more advanced than the original one of only 10W per channel. Inside the chassis, you can mount up to 8 HDDs & there are 8 expansion slots plus a 310mm depth for high-end graphic cards installation. Both X1 & X3 are designed to look "within the family"
- the scale-like ventilation on the top panel can be opened & closed for better air flow regulation
- its distinct feature that can be seen in all XPredators. Key Features • Solidly constructed chassis interior (0.7mm SPCC) • Supports CPU cooler max. height up to 186mm (without fans on side panel) • Supports Long VGA Cards up to 310mm. •
Includes: 1 x 12cm Black fan at rear & 1 x 20cm LED fan in front. • Top panel flaps can be opened or closed to control air flow more efficiently. Dust filter for PSU. •
Includes: 1 x external 2.5" HDD docking on top panel for easy access. •
Includes: two fan controller knobs each controls fan/s up to 25W. • Install up to 9 fans! •
Includes: antivibration pads for HDDs & PSU. • Cable Routing Management holes with high-end rubber grommets to protect your cables. • USB3.0 >USB2.0 adaptor included. • Pre-drilled CPU holes for easy mounting & removable of CPU cooler. • Support water cooling. • 2 x USB3.0 & Audio/ Mic ports are easily accessible from top panel USB3.0 >USB2.0 adaptor included Case Specifications • Form Factor: Midi Tower • Motherboard Support: ATX, Micro ATX, Mini ITX • PSU Support: Standard ATX • Gaming Case: Yes • Water Cooling Ready: Yes • Dimensions: 223mm x 527mm x 533mm (W x H x D) • Packaging Dimensions: 270mm x 589mm x 560mm (W x H x D) • Body
Material: 0.7/0.6 SECC • Front Bezel
Material: Plastic • Side Panel: Window / Vented • External Bays: 3 x 5.25” External • 1 x 3.5” External • Internal Bays: 8 x 3.5” Internal • 8 x 2.5” Internal • Drive Bay Notes: • Expansion Slots: 8 x Full Size • Cooling Front: 1 x 20cm White LED fan included • Cooling Top: 1 x 20 or 2 x 12 or 2 x 14cm fans (Optional) • Cooling Rear: 1 x 12 or 14 cm fan (1 x 14cm Black fan included) • Cooling Side: 2 x 12 or 2 x 14 cm fans (Optional) • Cooling Bottom: 1 x 12 or 14cm fan (Optional) • IO Ports: 2 x USB (Universal Serial Bus) 3.0 • 2 x USB (Universal Serial Bus) 2.0 • 1 x HD Audio • 1 x Microphone • Front Bezel
Colour: White • Body
Colour: White / Black Mesh • System Cabinet
Features:
Includes: 2 x Fan Controller knobs each support up to 25W • Removable & washable PSU dust filter • PSU Included: No • Net Weight (KGs): 8.66 KGs
















...