Aerocool Lightning Series Transparent 20cm Blue LED Fan Key Features Transparent black frame & transparent blue blades with quad blue LEDs. 13 fan blade design generates a sturdy high air pressure. Large fan blades creates higher airflow & reduce fan noise. 3-pin to 4-pin adaptor included. Specifications

Dimensions: 200 X 200 X 20mm Rated Voltage: DC 12V Starting Voltage: 10V Power Consumption: 3.84W Rated Current: 0.25±0.05A Speed: 700±10% RPM Air Flow: 58CFM Air Pressure: 1.12mm-H2O Noise: 16.5d B (A) MTBF: 20, 000 Hours

...

Aerocool Lightning Series Transparent 20cm Red LED Fan Key Features Transparent black frame & transparent red blades with quad red LEDs. 13 fan blade design generates a sturdy high air pressure. Large fan blades creates higher airflow & reduce fan noise. 3-pin to 4-pin adaptor included. Specifications

Dimensions: 200 X 200 X 20mm Rated Voltage: DC 12V Starting Voltage: 10V Power Consumption: 3.84W Rated Current: 0.32±0.05A Speed: 700±10% RPM Air Flow: 58CFM Air Pressure: 1.12mm-H2O Noise: 16.5d B (A) MTBF: 20, 000 Hours

...

Infinity Mirror RGB design in the centre of the fan delivers a mesmerizing look & feel to your rig Access 16.8 million colours using compatible Addressable RGB motherboards Requires Addressable RGB motherboard or hub (H66F / H106C) Comes with a 6-Pin adapter cable to connect your fan with compatible Addressable RGB motherboards Translucent fan blades allow you to fully appreciate this fan’s beautiful RGB lighting 28 LEDs ensure complete evenness & uniformity in colour & brightness 120mm fan with 6-Pin connector featuring an Infinity Mirror RGB design to deliver a mesmerizing look & feel to your rig. Access 16.8 million colours using compatible Addressable RGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, & Gigabyte RGB Fusion. Requires Addressable RGB motherboard or hubs (H66F / H106C). Comes with a 6-Pin adapter cable to connect your fan with compatible Addressable RGB motherboards. ...

Comes with 3 x Mirage 12 ARGB fans, 1 x H66F RGB Control Hub, & 1 x Remote Control Infinity Mirror RGB design in the center of the fan delivers a mesmerizing look & feel to your rig Translucent fan blades allow you to fully appreciate this fan’s beautiful RGB lighting Access 16.8 million colors using compatible Addressable RGB motherboards H66F hub means that you can connect up to six 6-Pin ARGB fans & up to two ARGB accessories with +5V ARGB connector H66F hub comes with PWM control functions for optimized fan RPM 120mm fan with 6-Pin connector featuring Infinity Mirror RGB design. Access 16.8 million colors using compatible Addressable RGB motherboards including ASUS Aura Sync, MSI Mystic Light Sync, & Gigabyte RGB Fusion. Comes equipped with three Mirage 12 ARGB fans, one H66F RGB Control Hub, & a remote control. ...

Key Features Cross design RGB LED with tempered glass in the front panel Bring your case to life with 13 lighting modes Full tempered glass side panel to showcase the inside of your rig Supports liquid cooling Supports CPU cooler up to 159mm High-performance mid tower case with a Cross design RGB LED with tempered glass in the front panel. Bring your case to life with 13 lighting modes: 6 RGB flow & 7 static color modes. Comes with a full tempered glass side panel to showcase the inside of your rig. Conveniently located LED control switch means that you can adjust your lighting effects to suit your unique style & mood. Supports liquid cooling in the front, top, & rear of the case. ...

Aerocool is proud to announce our first " Cube" case (Model
- Qx-2000) under the PGS-Q Series (Compact Series
- Blue Label).

...

The Rift is a high-performance mid tower case with a stylish edge design RGB LED displaying 13 unique lighting modes, 6 RGB flow & 7 static color modes. Mesh vents on the bottom-right side of the front panel increases air flow & circulation. Comes equipped with a full tempered glass side panel to showcase the inside of your rig. Edge design RGB LED on the left side of the front panel with 13 unique lighting modes Mesh vents on the bottom-right side of the front panel increases air flow & circulation Full tempered glass side panel to showcase the inside of your rig Supports air cooling the front, top, & rear of the case to enhance cooling performance Supports graphics card cooling: 2 x 120mm fans for superior VGA cooling Supports high-end graphics cards up to 346mm / 371mm (without front fan) Supports SD or micro SD memory card reader from the top panel BRING YOUR CASE TO LIFE Unique edge design LED on the left side of the front panel gives this case a stylish look & feel. Comes equipped with 13 pre-set lighting modes: 6 RGB flow lighting modes 7 Static colour modes enhanced AIR VENTILATION Mesh vents on the bottom-right side of the front panel increases air flow & circulation. FULL TEMPERED GLASS SIDE PANEL Comes equipped with a full tempered glass side panel to showcase the inside of your rig. DUAL CHAMBER DESIGN Built with a dual chamber design to direct heat away from the main chamber for more effective all-around cooling. AIR COOLING Supports air cooling in the front, top, & rear of the case to enhance cooling performance. Front: 120mm x 3 (Optional) Top: 120mm x 1 (Optional) Rear: 120mm x 1 (
Includes: 120mm Fan) Supports VGA Fan: 120mm x 2 (Optional) LIQUID COOLING Supports liquid cooling in the front panel. Front: 120mm Radiator (Optional) COOLING FOR YOUR GRAPHICS CARDS Supports graphics card cooling: 2 x 120mm fans for superior VGA cooling. BUILT FOR HIGH PERFORMANCE Supports CPU cooler up to a max. height of 155mm Supports longer high-end graphics cards up to 346mm / 371mm (without front fan) Supports ATX power supply up to 180mm CONVENIENT ACCESS TO YOUR MEDIA Quick & easy access to LED control switch, 1 x 3.0 USB (Universal Serial Bus), 2 x 2.0 USB (Universal Serial Bus), HD audio & mic ports, & power button. Supports memory card reader from the top panel: SD, micro SD (T-Flash), SDHC, micro SDHC up to 64GB, SDXC, micro SDXC up to 32GB. STORAGE CAPABILITY Supports up to 2 x 3.5” HDDs & 5 x 2.5” HDDs/SSDs. EASY MAINTENANCE Removable dust filters on the top & bottom of the case for fast & convenient cleaning. Specifications Case Type
- Mid Tower Colour
- Black Body Material
- SPCC Front Panel Material
- ABS Steel Thickness
- 0.5mm Motherboards
- ATX/micro ATX/mini-ITX Case

Dimensions (Internal)
- 188 x 430 x 375mm (W x H x D) Case

Dimensions (Overall)
- 195 x 461 x 411mm (W x H x D) 3.5” Drive Bays
- 2 Max. (2 x 3.5”/2.5?) 2.5” Drive Bays
- 5 Max. (3 x 2.5” & 2 x 2.5”/3.5”) Expansion Slots
- 7 GPU Clearance
- Supports GPU up to 346mm / 371mm (without front fan) CPU Cooler Clearance
- Supports CPU Cooler up to 155mm Air Cooling
- Front: 120mm x 3 (Optional) Top: 120mm x 1 (Optional) Rear: 120mm x 1 (
Includes: 120mm Fan) Supports VGA Fan: 120mm x 2 (Optional) Liquid Cooling
- Front: 120mm Radiator (Optional) I/O Ports USB3.0 x 1 USB2.0 x 2 HD Audio & Mic. SD Card Reader Net Weight/ Gross Weight
- 4.8kg (10.58 lbs.)/5.9kg (13.01 lbs.) Internal Cable Management Depth
- 20mm Power Supply
- ATX PSU (Up to 180mm, Optional)























...

The RS-9 is solidly constructed in 0.6mm SECC Japanese steel & beautifully finished both inside & out. The case is available in two different internal colours red & black. The only other difference is the side panel. Also, each case has a fan controller installed into the top 5.25" drive bay that is capable of controlling up to four 4-pin molex fans, with low, medium & high setting. The RS-9 has been designed to be user friendly with its great expandability & versatility. The screw-less feature & pre-drilled holes on the motherboard tray for cable routing make this chassis a joy to work with. The pre-drilled cable routing holes are also protected by high quality rubber to prevent cable damages from sharp edges. A CPU cut-out is also pre-drilled on the motherboard tray for ease of CPU cooler installation & removal. This chassis offers plenty of space for installation of components. At the front of the case are eight usable 5.25" drive bays with one of them having a fan controller pre-installed. The case is supplied with 5.25" to 3.5" adaptors for mounting 3.5" devices. The chassis is deep enough to accommodate graphics cards up to a total of 290mm in length. To keep temperatures down, there are four locations for installing case fans. At the front of the case there is a 120mm LED fan (supplied). This brings cool air into the case & helps to aid cooling. At the rear of the case is space for a 120mm LED fan (supplied) which extracts the warm air from inside the chassis. On the roof of the case there is space for two 120mm fans (not supplied) & finally the side panel has room for two 120mm fans (not supplied). These fans can be used as exhaust or intake fans. Key Features High performance " Mid-Tower" for gamers & enthusiast. Solidly constructed "ALL BLACK" chassis – 0.6mm SECC Japanese Steel & beautifully finished ALL BLACK interior. High-end Graphic card Support
- Supports longer high-end VGA cards up to 295mm. High Expandability
- Supports 9 x 5 1/4" bays, 3 x 3.5" HDDs (internal) & 1 x 3.5" external devices such as Floppy or a Card Reader. HDD Protection
-

Includes:: anti-vibration rubbers to protect your HDDs from shock. Ease of Installation – New " Easy-install" screw-less kits are included for the 5 1/4" devices. Easy Access Top I/O ports
- 2 x USBs, Audio/ Mic & E-Sata ports. Smart Cable Management – Cable routing is pre-drilled on the MB so users can hide cables behind the MB tray. Dust Protection
-

Includes:: front, bottom & top " Dust Filter" to prevent dust entering your computer. Mesh PCI cover
-

Includes:: Red metal mesh PCI covers for better ventilation. RED LED fan controller
- 3 " Mode" (Low, Medium & High) RED LED fan controller is included to control up to 20 Watts of power. Bottom PSU position
- the bottom PSU location enables PSUs to suck in cold air & provides better air flow for your system. Water-cooling Support
- water-cooling holes are pre-drilled to support water-cooling systems!! Motherboard Support: ATX, Micro ATX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 200mm x 443mm x 476mm (W x H x D) Packaging Dimensions: 260mm x 493mm x 545mm (W x H x D) Body
Material: SECC 0.60mm Front Bezel
Material: ABS Plastic + Mesh Side Panel: Window / Vented External Bays: 9 x 5.25” External 1 x 3.5” External Internal Bays: Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: 1 x 12cm RED LED fan included Cooling Top: 2 x 12cm or 14cm fans (not included) Cooling Rear: 1 x 12cm RED LED fan included Cooling Side: 2 x 12cm or 14cm fans (not included) Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 2.0 1 x E-SATA 1 x HD Audio (Also Supports AC97) 1 x Microphone
















...

Stylish RGB LED design with acrylic in the front panel Access 13 preset lighting modes via conveniently located LED control button Comes equipped with three 12cm RGB fans in the front & one 12cm RGB fan in the rear of the case Full acrylic side panel to showcase the inside of your rig Air vents on the front panel provide superior air flow & circulation Dual chamber design for enhanced ventilation Supports CPU coolers up to 155mm Supports high-end graphics cards up to 355mm High-performance mid tower case with a stylish RGB LED design & acrylic in the front panel. Comes with a full acrylic side panel to showcase the inside of your rig and three 12cm RGB fans in the front & one 12cm RGB fan in the rear of the case. Air vents on the sides of the front panel provide superior air flow & ventilation. Bring your case to life with 13 lighting modes: 6 RGB flow & 7 static color modes. Conveniently located LED control switch means that you can adjust your lighting effects to suit your unique style & mood. ...

Aerocool Shark 12cm Black Fan 15 Blade Fluid Dynamic Bearing Power/ Silence Modes Key Features Unique & Stylish " Shark Fin" Fan Blade design. 15 fan blades generates High Air Pressure & Air Flow
- the most fan blades in the world!!!! Innovative Fluid Dynamic Bearing delivers longer life span, higher precision rotation & anti-shock function. Duo Mode Operation
- The Shark fan operates in both " Power" mode (12V) & " Silence" mode (7V
- with adaptation of Voltage reduction cable). All cables are "black" sleeved. Accessories include a Voltage Reduction cable, a 3 to 4 pin converter cable, 4 units of Anti-vibration Rubber Screws & 4 units of standard screws. Standard Connection (Power mode) 1 x Voltage Reduction cable (12V to 7V) w/ Black Cable Sleeving 1 x 3 to 4 pin converter cable w/ Black Cable Sleeving 4 x Anti-vibration Screws 4 x Standard Screws Specifications Standard Connection (Power mode), Connect with Voltage Reduction Cable (Silence mode)

Dimensions: 120 X 120 X 25mm Rated Voltage: 12V, (To FAN)7V Starting Voltage: <= 9.0V, <= 7.0V Power Consumption: 3.6W, 1.56W Rated Current: 0.30A, 0.13A Speed: 1500 RPM+-10%, 800 RPM+-10% Air Flow: 82.6 CFM, 32.5 CFM Air Pressure: 1.273 mm-H2O, 0.305 mm-H2O Noise: 26.5d BA, 12.6 d BA MTBF: 100000 hours




...