High-performance mini tower case with a mesh front panel design for increased air circulation & viewing of your front LED fan. Wide & sturdy chassis design supports two additional vertical expansion slots, allowing you to install your graphics card at a vertical position. Full tempered glass side panel with a convenient hinge mechanism & handle allows for easy opening & closing while showcasing the inside of your rig. Two rubber cable grommets & two cable passthrough tubes on the motherboard tray allow for efficient cable management while keeping your cables neat & secure. Comes equipped with one 20cm ARGB fan in the front & one 12cm ARGB fan in the rear of the case that can be controlled via ARGB motherboard or LED control button. SPACIOUS INTERIOR FOR MAXIMUM PERFORMANCE Featuring a chassis design focused on delivering increased interior space, you now have more freedom & possibilities with your components. With more room for your graphics card, coolers & fans, & even your motherboard, the Atomic will allow you to fully maximize the performance of your PC build. Built with two additional vertical expansion slots, this case means that you can install your graphics card at a vertical position. ADDRESSABLE RGB COMPATIBLE Take full control of your Addressable RGB fans using one of two ways: RGB LED control button on top of the case Addressable RGB motherboard TWO ADDRESSABLE RGB FANS INCLUDED Comes equipped with one 20cm ARGB fan in the front & one 12cm ARGB fan in the rear of the case to add a stylish flair to your rig. FULL TEMPERED GLASS SIDE PANEL WITH HINGE DESIGN Full tempered glass side panel with a convenient hinge mechanism & handle allows for easy opening & closing while showcasing the inside of your rig. EFFICIENT CABLE MANAGEMENT Comes equipped with two rubber cable grommets & two cable passthrough tubes on the motherboard tray to keep your cables neat, tidy, & secure. enhanced AIR VENTILATION Mesh front panel design allows for increased air ventilation & viewing of your front LED fan. BUILT FOR HIGH PERFORMANCE Supports Micro-ATX & mini-ITX motherboards Supports CPU cooler up to 184mm (104mm if mounting GPU vertically) Supports high-end graphics cards up to 347mm (without front radiator) CONVENIENT ACCESS TO YOUR MEDIA Quick & easy access to LED control button, USB3.0 x 2, HD audio & mic ports, & power & reset button. STORAGE CAPABILITY Supports up to 2 x 3.5”HDDs (1 x 3.5” & 1 x 3.5”/2.5”) & 4 x 2.5” SSDs (3 x 2.5” & 1 x 2.5”/3.5”). EASY MAINTENANCE Comes equipped with removable top & bottom dust filters for convenient cleaning & maintenance. Main Features Comes equipped with one 20cm ARGB fan in the front & one 12cm ARGB fan in the rear of the case Two vertical expansion slots allow for vertical graphics card installation Two rubber cable grommets & two cable passthrough tubes allow for efficient cable management Full tempered glass side panel with a convenient hinge mechanism & handle Supports liquid cooling in the front, top, & rear of the case ...

Stylish RBG Case The Aero One Mini Eclipse is a mini tower case with tempered glass side panels to showcase the inside of the rig. The mesh front panel design provides a clear view of the front LED fans while providing excellent airflow. The housing supports liquid cooling at the front & top of the housing for maximum cooling efficiency. The case is equipped with three 12 0mm addressable RGB fans on the front & a 120mm addressable RGB fan on the back. The addressable RGB fans can be controlled in two ways: via the RGB LED control button or via a compatible addressable RGB motherboard. The case is already equipped with a H66C RGB Control Hub. Features Equipped with 3 12cm RGB addressable fans on the front & one on the back of the box. RGB addressable fans can be controlled in two ways: RGB LED control button or RGB addressable motherboards. The front panel in the grille design allows better visualization of your LED fans on the front & better air circulation. Detachable dust filters on the front, top & bottom of the chassis for convenient maintenance. Access 16.8 million colours by connecting an RGB addressable motherboard. ...

High-performance Mini Tower case with a stylish RGB LED design in the front panel. Comes with a full tempered glass side panel to showcase the inside of your rig. Carbon fibre style front panel delivers a futuristic look & feel to your gaming setup. Bring your case to life with 13 lighting modes: 6 RGB flow & 7 static colour modes. Conveniently located LED control switch means that you can adjust your lighting effects to suit your unique style & mood. Main Features Bring Your Case To Life
- Bring your case to life with 13 preset lighting modes that can be readily controlled via LED control button. 6 RGB Flow Modes & 7 Static Colour Modes. Carbon Fibre Style Front Panel
- Featuring a stylish carbon fibre style finishing on the front panel, this case adds a futuristic flair to your gaming setup. Full Tempered Glass Side Panel
- Comes equipped with a full tempered glass side panel to properly showcase the inside of your rig. Air Cooling
- Supports air cooling in the front, top & rear of the case to enhance cooling performance: Front: 120mm x 2 (Optional), Top: 120mm x 2 (Optional) & Rear: 120mm x 1 (Included). Liquid Cooling
- Supports liquid cooling in the front & rear of the case for maximum efficiency cooling: Front: 120mm Radiator (Optional) & Rear: 120mm Radiator (Optional). Built For High Performance
- Supports Micro-ATX & Mini-ITX motherboards. Supports CPU coolers up to 158mm. Supports high-end graphics cards up to 318mm (without front fan). Convenient Access To Your Media
- Quick & easy access to LED control button, 1 x USB (Universal Serial Bus) 3.0, 2 x USB (Universal Serial Bus) 2.0, HD audio & mic ports & power button. Storage Capability
- Supports up to 2 x 3.5" HDDs (1 x 3.5" & 1 x 2.5"/3.5") & 4 x 2.5" SSDs (3 x 2.5" & 1 x 2.5"/3.5"). Easy Maintenance
- Removable dust filters on the top & bottom of the case for fast & convenient cleaning.








...

High-performance Mid-Tower case with Bolt design RGB LED on the front panel. Bring your case to life with 13 lighting modes: 6 RGB flow & 7 static colour modes. Comes with a full acrylic side panel to showcase the inside of your rig. Conveniently located LED control switch means that you can adjust your lighting effects to suit your unique style & mood. VGA fan bracket provides additional cooling for your graphics card. Features Bring Your Case To Life
- Unique RGB LED design on the front panel delivers a stylish look & feel. Bring your case to life with 13 preset lighting modes that can be readily controlled via LED control buttons: 6 RGB flow Modes & 7 static Colour modes. Carbon Fibre Style Front Panel
- Featuring a stylish carbon fibre style finishing on the front panel, this case adds a futuristic flair to your gaming setup. Full Acrylic Side Panel
- Comes equipped with a full acrylic side panel to properly showcase the inside of your rig. Dual Chamber Design
- Built with a dual chamber design to direct heat away from the main chamber for more effective all-around cooling. Air Cooling
- Supports air cooling in the front, top, rear of the case & the top of the PSU chamber to enhance cooling performance. Front: 120mm x 3 (optional), top: 120mm x 2 (optional), rear: 120mm x 1 (
Includes: 120mm Fan x 1) & VGA Fan: 120mm x 2 (optional). Liquid Cooling
- Supports liquid cooling in the front of the case for maximum efficiency cooling. Front: 240mm radiator (optional). Cooling For Your Graphics Card
- Supports graphics card cooling: 2 x 120mm fans for superior VGA cooling. Built For High Performance
- Supports ATX, Micro-ATX & Mini-ITX motherboards. Supports CPU coolers up to 155mm. Supports high-end graphics cards up to 355mm. Convenient Access To Your Media
- Quick & easy access to the LED control button, 1 x USB (Universal Serial Bus) 3.0, 2 x USB (Universal Serial Bus) 2.0, HD audio, mic ports & power button. Storage Capability
- Supports up to 2 x 3.5” HDDs & 2 x 2.5” SSDs. Easy Maintenance
- Removable dust filters on the top & bottom of the case for fast & convenient cleaning. Specifications Case

Dimensions (Internal): 180 x 434 x 360mm (W x H x D) Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX PSU Location: Bottom Gaming Case: Yes Water Cooling: Water Cooling Ready! Supported Radiator

Size: 240mm Supported Radiator Positions: Front Body

Material: 0.5mm SPCC Front Bezel

Material: ABS Side Panel: Acrylic Panel Internal Cable Management

Depth: 24mm External Bays: Internal Bays: 2 x 3.5” Internal, 2 x 2.5” Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: Space for 3 x 120mm Fans Cooling Top: Space for 2 x 120mm Fans Cooling Rear: Space For 1 x 120mm Fan Cooling Side: None Cooling Bottom: Space for 2 x 120mm Fans Fan Controllers: 0 Fan Controllers, controlling up to 0 fans in total IO Ports: 1 x USB (Universal Serial Bus) 3.0, 2 x USB (Universal Serial Bus) 2.0, 1 x HD Audio, 1 x Microphone GPU Max Length: 355mm CPU Cooler Maximum

Height: 155mm Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No





























...

Aerocool Cool Touch E 5.25" LCD Fan Controller Touch Panel Black Multi Colour What would be the next coolest thing to add on to your gaming rig? The answer is Cool Touch-E! Not only it gives you the ability to control up to four channels of fans at max. 20W each in your PC, it also gives you a total of seven backlight color to match your mood including backlight off. The frame of Cool Touch-E also comes in two colors selection
- black or white, a choice to match to your PC color. Key Features Touch
- Innovative " Touch" LCD technology Individual Controls
- Controls 4 sets of fan speed individually 3 Speed setting
- Low/ Mid/ High 7 LED
- Backlight colors selection or turn off backlight completely Supports
- Up to 20W per channel Individual Power
- Power on/off for each individual channel Specifications

Material: ABS Plastic Speed Range: 0>50%>75%>100% Max. wattage per fan channel: 20W








...

ARGB CPU AIR COOLER PWM air cooling solution with a stylish Addressable RGB LED design. Top Down Cooling design allows for more efficient heat dissipation. Compatible with Addressable RGB motherboards or hubs (H66F). Compatible with most current motherboard designs. Not compatible with Intel 2011 & 2066. Built-in RGB LED lighting adds a stylish flair to your rig Compatible with Addressable RGB motherboards or hubs Top Down Cooling design allows for more efficient heat dissipation & higher compatibility with cases TDP (Thermal Design Power) up to 110W Black coating on fins increases heat dissipation area & improves efficiency of dissipation Upgraded high efficiency fins for maximum thermal performance Works with most current AMD & Intel motherboard designs. Not compatible with Intel 2011 & 2066 ...

Aerocool Cruise Star ATX Mid Tower Case with 1x USB3 1x 12cm LED Front Fan Card Reader Window Description If you are looking for a value case but want a gaming futuristic look, Cruise star is the case for you! With a decent price tag, this case can install up to two 2.5" HDD/SSD or two 3.5" HDD & a clearance of up up 350mm for installing high
- end long graphic cards without any problem. A red LED 12cm fan is included in the front panel which adds a cool look when powered & it also gives the airflow the case needs. Whats more is the case is equipped with SD/TF card reader, what a bargain! Key Features All black chassis interior Acrylic side window panel Supports high
- end graphic cards up to 375mm Supports max. CPU cooler height of 153mm 12cm Red LED Fan included Supports up to 3 x 3.5" HDD & 1 x 2.5" HDD/SSD USB (Universal Serial Bus) 2.0 interface SD/micro SD card reader included Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX PSU Location: Top Gaming Case: Yes Water Cooling: Not Water Cooling Ready Body

Material: 0.45mm SECC Metal Front Bezel

Material: Plastic Side Panel: Window Internal Cable Management

Depth: 23mm External Bays: 1 x 5.25 External Internal Bays: 3 x 3.5 Internal 2 x 2.5 Internal Drive Bay Notes: 1 x 2.5" bays uses 1 x 3.5" bays Expansion Slots: 7 x Full Size Cooling Front: 1 x 12cm Red LED Fan Cooling Top: Space for 2 x 12cm Fan (Not Included) Cooling Rear: Space for 1 x 8cm Fan (Not Included) Cooling Side: None Cooling Bottom: None IO Ports: 1 x USB (Universal Serial Bus) 3.0 1 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone SD/TF Card Reader Included (Built-in) GPU Max Length: 350mm CPU Cooler Maximum

Height: 153mm Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: Card Reader Supports SD/MMC PSU Included: No















...

Compact & Professional In need of a PC case that does not take up too much of the desk space but at the same time, looks professional on your office desk or in your study room? Cs-101 from the PGS-C series is the perfect choice. The case can be placed vertically or horizontally depending on your needs. This case supports both Mini-ITX & Micro-ATX motherboards so you will have plenty of choice when shopping for the perfect motherboard for this case. Features Slim type desktop PC chassis suitable for home & office use. The case is suitable for both vertical (stand included) or horizontal placement. Support Mini-ITX & Micro-ATX motherboards. Support 1x standard 5.25” bay & max. 2x 2.5". Support SFX power supply. 1 x 8cm fan included on top panel for better air ventilation. ...

ARGB CPU AIR COOLER PWM air cooling solution with a stylish RGB LED Ring around the fan of the cooler. Powered by Heat Core Touch Technology (HCTT) with 3 ultra-efficient thermal heat pipes. Top Down Cooling design allows for more efficient heat dissipation. Black coating on fins increase heat dissipation area & improves cooling efficiency. Compatible with Addressable RGB motherboards or hubs (H66F). • RGB LED Ring adds a stylish flair to your rig • Compatible with Addressable RGB motherboards (ASUS Aura Sync, MSI Mystic Light Sync, & Gigabyte RGB Fusion) or hubs (H66F) • Heat Core Touch Technology with 3 ultra-efficient thermal heat pipes • Top Down Cooling design allows for more efficient heat dissipation & higher compatibility with cases • Black coating on fins increases heat dissipation area & improves efficiency of dissipation • TDP (Thermal Design Power) up to 125W ...

PWM air cooling solution with stylish Addressable RGB LED on the top & side of the air cooler. Powered by Heat Core Touch Technology (HCTT) with 4 ultra-efficient thermal heat pipes. Black coating on the fins increase heat dissipation area & improves cooling efficiency. Cover on the top of the air cooler achieves a unidirectional air flow, improving heat dissipation. Main Features Dynamic RGB LED Design
- Comes equipped with an RGB LED Slash on the top & an RGB LED Ring on the side of the air cooler, adding a stylish & dynamic effect to your rig. Addressable RGB Compatible
- Access 16.8 million colours using compatible Addressable RGB motherboards including ASUS Aura Sync & MSI Mystic Light Sync as well as Gigabyte RGB Fusion motherboards using 3-Pin XWD connector. Top Cover For enhanced Air Flow
- Cover on the top of the air cooler achieves a unidirectional air flow, allowing heat to dissipate more quickly & efficiently. Heat Core Touch Technology (HCTT)
- 4 Heat pipes provide a perfectly flat & smooth surface to maximise contact surface area. This allows for minimal heat transfer loss while in direct contact with the CPU to increase the efficiency of heat dissipation. PWM High Pressure Fan
- 120mm high-pressure fan provides a stronger airflow to push heat away from the aluminium fins faster. High Efficiency Fins With Black Coating
- Upgraded high efficiency fins for maximum thermal performance. Black coating on fins allows for faster heat absorption, improving cooling efficiency. Compatibility
- Compatible with most current motherboard designs. Socket compatibility: LGA 2066/2011/115X/775 AM4/AM3+/AM3/AM2+/AM2/FM2/FM1. Comes With PWM 4-Pin Connector.






...