High-performance mid tower case with a bold & stylish front panel design to deliver an element of power to your gaming setup. Mesh front panel design delivers enhanced air flow & ventilation while allowing for viewing of your front LED fan. Comes equipped with 12cm FRGB fans with Fixed RGB lighting to create a static lighting effect. POWERFUL FRONT PANEL DESIGN Bold & stylish front panel design delivers an element of power to your gaming setup. Mesh front panel design allows for increased air ventilation & viewing of your front LED fan. FIXED RGB FANS INCLUDED Comes equipped with Saturn 12 FRGB fans with Fixed RGB Lighting to create a static lighting effect & add a stylish flair to your rig. Pre-installed Saturn 12 FRGB fans come with Molex connector only FULL TEMPERED GLASS SIDE PANEL Comes equipped with a full tempered glass side panel to showcase the inside of your rig & put your components on display. DUAL CHAMBER DESIGN Built with a dual chamber design to direct heat away from the main chamber for more effective all-around cooling. BUILT FOR HIGH PERFORMANCE Supports ATX, Micro-ATX, & Mini-ITX motherboards Supports CPU coolers up to 166mm Supports high-end graphics cards up to 325mm (without front radiator) CONVENIENT ACCESS TO YOUR MEDIA Quick & easy access to 1 x USB (Universal Serial Bus) 2.0, 2 x USB (Universal Serial Bus) 3.0, HD audio & mic ports, & power button. STORAGE CAPABILITY Supports up to 2 x 3.5” HDDs (1 x 3.5” & 1 x 3.5”/2.5& Prime;) & 4 x 2.5” SSDs (3 x 2.5” & 1 x 3.5”/2.5”). EASY MAINTENANCE Removable top & bottom dust filters for convenient cleaning & maintenance. Main Features Bold & stylish front panel design delivers an element of power to your gaming setup Fixed RGB fans
- Creates a static lighting effect, adding a stylish flair to your rig Mesh front panel design allows for increased air ventilation & viewing of your front LED fan Full tempered glass side panel to showcase the inside of your rig Supports liquid cooling in the front & rear of the case Dual chamber design for enhanced ventilation
...

Product description Ultra thin protective folio case for iPad mini with built-in viewing stand Product Features Ultra thin & lightweight design Openings for camera, buttons etc Extra protection for the corners of your iPad Stand with multiple viewing angles Automatically turns the iPad on/off Soft inner lining For iPad mini ...

Your instructor will perform an extreme aerobatic sequence. Its then time for you to try & perform the same manoeuvres as your instructor coaches you! The plane used is a Pitts Special. This is a lightweight aerobatic biplane designed by Curtis Pitts. It has accumulated many competition wins since its first flight in 1944. The Pitts Special dominated world aerobatic competition in the 1960s & 1970s &, even today, remains a potent competition aircraft in the lower categories. Programme Your lesson begins with a briefing to describe how an aircraft flies, & the effects of the controls. You then move out to the aircraft & the instructor shows you round the aircraft as he does his walk-round checks. Climb in, strap in, start up & off you go. Be prepared to experience some G as the pilot shows you just how agile these planes can be. Duration 25 minute flight chock to chock with the total experience lasting at least an hour. Group Your tuition is on a one to one basis. Spectators You are welcome to bring along family & friends to watch you take to the skies. Fitness This may not be suitable if pregnant suffer from epilepsy, fits, severe head injuries, fainting, giddiness, blackouts, high blood pressure or heart conditions. The maximum weight is 17 stone & the maximum height is 6ft 1in. Experience There are no qualifications required. Minimum Age The minimum age is 16 years. Availability This experience is available Monday to Sunday, throughout the year. Available Locations Perthshire
- Perth
...

Aerobatic flight, or to give it its earlier name, stunt flying, is probably one of the most exciting of flying experiences around. You may have seen some of the manoeuvres at air shows & now is your chance to experience the G-forces as you pull stunts in the air. This is definitely not for the faint hearted. During this flight youll learn how to do a loop & a roll, the two manoeuvres which are the basis for all aerobatic flight. All aerobatic flights are with an experienced instructor & include a comprehensive preflight briefing where all of the controls will be explained. Once airborne your instructor will demonstrate the aerobatic manoeuvres & allow you the opportunity to fly the aircraft yourself. Please note this flight lasts 20 to 25 minutes depending on location. The minimum age is 18 years. The maximum weight is 16 stone, the maximum height is 6ft 6. You must be fit without no heart problems, agile as embarking & disembarking is difficult & requires flexibility. This may not be suitable for pregnant women. Essex
- Stapleford Tawney Gloucestershire
- Cheltenham

...

Aerobie Aero Spin yo-yo is ideal for all types of tricks & all players skill levels. Its patented soft rim makes the Aero Spin yo-yo more fun to play & catch. The Aero Spin yo-yos adjustable gap enables a player to set its responsiveness at the desired level. ...

Aero-500 White Midi Tower Gaming Case With Window & Card Reader Introducing the new PGS-A series to the Performance Gaming System (PGS) family. A, stands for Airflow, it is one of the most important aspect when it comes to building a PC case. The accumulation of heat slowing down PC performance, the clusters of cables cause blockage of smooth airflow inside limited chassis space, these are the concerns that lead us to develop PC cases with enhanced cable management ability, greater expandability to accommodate more hi-end water cooling systems & fans, & most importantly the exterior design that excel in the concept of transporting air from one end to the other. For gamers & PC enthusiasts, they can finally stop worrying the building up of heat & for ordinary users, they can finally get a feel of what a truly good performance of a PC is. Key Features superb gaming case aimed for great airflow performance. Specially designed top metal cover with extended depth to easily install 240mm water cooling system. Bay covers are designed with a simple flip mechanism for easy removal of bay cover without removing the front panel. Support hi-end graphic cards up to 374mm. Supports max. CPU cooler height of 155mm. Supports max. PSU length of 180mm. Magnetic metal mesh sheet on top panel is easy to remove for cleaning & adds style to the chassis. Removable PSU dust filter for easy cleaning. PSU cover design. Supports up to 4x 3.5 HDD & 2x 2.5 HDD/SSD. 1 x USB3.0 + 2 x USB2.0 / HD Audio + Mic. Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 203mm x 505mm x 439.5mm (W x H x D) Packaging Dimensions: 235mm x 525mm x 550mm (W x H x D) Body

Material: 0.5mm Metal Front Bezel

Material: Plastic Side Panel: Window External Bays: 2 x 5.25 External Internal Bays: 4 x 3.5 Internal 2 x 2.5 Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: Space for 2 x 12cm Fan (Not Included) Cooling Top: Space for 2 x 12cm Fan (Not Included) Cooling Rear: 1 x 12cm Fan Cooling Side: None Cooling Bottom: None IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 4.9 KGs









...

As mysterious as its name suggests, the new 6th Element case is constructed with simple geometric shape in mind that makes up its uniqueness & stands out among the crowd. The Sixth Element is extremely user-friendly & it gives the user great expandability & versatility. The screw-less feature & pre-cut holes on the motherboard plate (for tidy cable routing) make this chassis easy to work with. The pre-cut cable routing holes are also protected by high quality rubber to prevent cable damage from sharp edges. Finally a CPU hole has also pre-cut on the motherboard plate for ease or cooler assembly & removable. This chassis offers great expansion capabilities. It can support four 5.25" devices, one 3.5" device (external) with included converter bracket. Internally the case can accommodate six 3.5" HDDs. Due to the depth of the case it is deep enough to support long high end graphics cards up to 400mm in length (when the middle HDD cage is removed). With the middle HDD cage installed, the chassis can support graphics cards up to 280mm in length. The Sixth Element features many key locations for airflow. At the front & roof of the case, two 140mm LED fans are used (both supplied). There are also locations for one 120mm fan at the rear of the case & two 120mm fans on the side panel (not supplied). Finally the PSU cut-out features a filter to help prevent dust entering the system. Key Features High performance " Mid-Tower" for gamers & enthusiast. Solidly constructed chassis – 0.6mm SECC Japanese Steel. ALL BLACK interior & "blue" MB plate for an unique touch! Supports longer high-end VGA cards up to 400 mm (with HDD cage removed). Supports 4 x 5 1/4" bays & maximum 6 x 3.5" HDDs (internal) 90 degree retractable HDD bracket in “blue” color " Easy-install" screw-less kits for the 5 1/4" devices Cable management holes are pre-drilled with rubber protection CPU hole is pre-drilled on the MB plate for ease of CPU cooler assembly Can install 2 x 12cm fan at side panel (optional) / 1x 12cm at rear (optional) / 1x 14cm quad blue LED fan in front (included) / & 1x 14cm blue LED at top panel (included) Bottom PSU position enables PSUs to suck in cold air for better cooling. Water-cooling holes are pre-drilled to support water-cooling systems 2 x USB/ 1 x e SATA / Audio+ Mic (AC’97 + HD audio) are easily accessible from the top panel. Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 197mm x 510mm x 530mm (W x H x D) Packaging Dimensions: 262mm x 550mm x 604mm (W x H x D) Body
Material: SECC 0.60mm Front Bezel
Material: ABS Plastic Side Panel: Window / Vented External Bays: 4 x 5.25” External Internal Bays: 6 x 3.5” Internal Drive Bay Notes: 4 x 5.25" (External) 3 x 3.5" (w/adaptor) 6 x 3.5" HDDs (internal) Expansion Slots: 7 x Full Size Cooling Front: 1 x 14cm RED LED fan included Cooling Top: 1 x 14 RED LED fan included Cooling Rear: 1 x 12cm fan (not included) Cooling Side: 2 x 12 cm fans (not included) Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 2.0 1 x E-SATA 1 x HD Audio (Also Supports AC97) 1 x Microphone Front Bezel
Colour: Black


...

Aero-800 Black Midi Tower Gaming Case With Window Introducing the new PGS-A series to the Performance Gaming System (PGS) family. A, stands for Airflow, is one of the most important aspect when it comes to building a PC case. The accumulation of heat slowing down PC performance, the clusters of cables cause blockage of smooth airflow inside limited chassis space, these are the concerns that lead us to develop PC cases with enhanced cable management ability, greater expandability to accommodate more hi-end water cooling systems & fans, & most importantly the exterior design that excel in the concept of transporting air from one end to the other. For gamers & PC enthusiasts, they can finally stop worrying the building up of heat & for ordinary users, they can finally get a feel of what a truly good performance of a PC is. Key Features superb gaming case aimed for great airflow performance Specially designed top metal cover with extended depth to easily install 240mm water cooling system. Front panel also supports the installation of either 240mm/280mm water cooling system. Bay covers are designed with a simple flip mechanism for easy removal of bay cover without removing the front panel. Support hi-end graphic cards up to 390mm. Supports max. CPU cooler height of 155mm. Supports max. PSU length of 180mm. Magnetic metal mesh sheet on top panel is easy to remove for cleaning & adds style to the chassis. Removable PSU dust filter for easy cleaning. PSU cover design. Supports up to 2x 3.5 HDD & 3x 2.5 HDD/SSD. 2x USB3.0 / HD Audio + Mic. Large acrylic side window for clear viewing of chassis interior. Specifications Form Factor: Desktop, Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 200mm x 501mm x 475.8mm (W x H x D) Packaging Dimensions: 270mm x 556mm x 555mm (W x H x D) Body

Material: 0.6mm SGCC Front Bezel

Material: Plastic Side Panel: Window External Bays: 2 x 5.25 External Internal Bays: 2 x 3.5 Internal 3 x 2.5 Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: 1 x 12cm Fan (Included)
- Space for 1 x Extra 12/14cm Fan (Not Included) Cooling Top: Space for 2 x 12cm Fan (Not Included) Cooling Rear: 1 x 12cm Fan Cooling Side: None Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 6.15 KGs










...

Aero-800 Grey Midi Tower Gaming Case With Window Introducing the new PGS-A series to the Performance Gaming System (PGS) family. A, stands for Airflow, is one of the most important aspect when it comes to building a PC case. The accumulation of heat slowing down PC performance, the clusters of cables cause blockage of smooth airflow inside limited chassis space, these are the concerns that lead us to develop PC cases with enhanced cable management ability, greater expandability to accommodate more hi-end water cooling systems & fans, & most importantly the exterior design that excel in the concept of transporting air from one end to the other. For gamers & PC enthusiasts, they can finally stop worrying the building up of heat & for ordinary users, they can finally get a feel of what a truly good performance of a PC is. Key Features superb gaming case aimed for great airflow performance. Specially designed top metal cover with extended depth to easily install 240mm water cooling system. Front panel also supports the installation of either 240mm/280mm water cooling system. Bay covers are designed with a simple flip mechanism for easy removal of bay cover without removing the front panel. Support hi-end graphic cards up to 390mm. Supports max. CPU cooler height of 155mm. Supports max. PSU length of 180mm. Magnetic metal mesh sheet on top panel is easy to remove for cleaning & adds style to the chassis. Removable PSU dust filter for easy cleaning. PSU cover design. Supports up to 2x 3.5 HDD & 3x 2.5 HDD/SSD. 2x USB3.0 / HD Audio + Mic. Large acrylic side window for clear viewing of chassis interior. Specifications Form Factor: Desktop, Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 200mm x 501mm x 475.8mm (W x H x D) Packaging Dimensions: 270mm x 556mm x 555mm (W x H x D) Body

Material: 0.6mm SPCC Front Bezel

Material: Plastic Side Panel: Window External Bays: 2 x 5.25 External Internal Bays: 2 x 3.5 Internal 3 x 2.5 Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: 1 x 12cm Fan (Included)
- Space for 1 x Extra 12/14cm Fan (Not Included) Cooling Top: Space for 2 x 12cm Fan (Not Included) Cooling Rear: 1 x 12cm Fan Cooling Side: None Cooling Bottom: None IO Ports: 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 6.15 KGs










...

80PLUS BRONZE 230V EU PSU Featuring best in class protections & impressive performance while offering one-of-a-kind affordability, the AERO PSU series is perfect for DIY PC builders who want a feature-packed power supply without breaking the bank. The AERO BRONZE is 80 Plus Bronze 230V EU Certified for up to 90%+ efficiency, delivering maximum efficiency performance. Premium Bronze power supply with efficiency performance rivaling that of 80 Plus Silver 230V EU PSUs Up to 90%+ efficiency with 80 Plus Bronze 230V EU certified DC-to-DC conversion circuit for higher efficiency & tight voltage regulation even under heavy cross-loading conditions Built-in premium 105°C Japanese main capacitors provide low ripple & higher durability High-end solid state capacitors provide great DC output quality for enhanced noise filtering & low ripple 12cm high-pressure fan with optimized fan speed allows for near inaudible fan noise & silent PSU operation Best in class protections makes PSU highly resistant to damage: OVP, UVP OPP, SCP, OCP, Input Surge & Inrush Protection, & OTP Compliant with Er P 2013 Lot 6 for high energy efficiency & EMC compliant ...