United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Adaptec 7805 SAS/SATA (8 Int Port) RAID Adapter - Single
Adaptec Series 7 2nd Generation 6Gb/s RAID Adapters with PCIe Gen3 interface for Game Changing Performance
Key Features
•6 Gb/s throughput at each port
•PMC PM8015 ROC
•Maximum performance for up to 24 SSDs (No expander needed)
•Support for up to 256 SAS and SATA devices
•Support for SSD, HDD, Autoloader, RBOD, Tape
The Adaptec Series 7 RAID adapter family features PMC's 24 port PM8015 RAID-on-Chip (ROC), which combines a x8 PCIe Gen3 interface with 6Gb/s SAS ports to enable a new generation of high- performance RAID adapters that are unmatched by any other ROC in the industry. Adaptec Series 7 RAID adapters are available with 8, 16, or 24 native SAS/SATA ports.
While the PCIe Gen3 interface doubles bandwidth to the host compared to PCIe Gen2, it requires at
least 16 6Gb/s SAS/SATA ports to double the bandwidth to the storage devices. Competing 6Gb/s solutions have only 8 ports, and cannot leverage that advantage. New Levels of Performance Series 7 adapters perform at up to 6.6 GB/s on sequential reads and up to 2.6 GB/s on sequential writes on parity RAID 5, more than doubling the performance of competing host-based RAID adapters. With 16 direct-connected solid-state drives (SSDs), Series 7 adapters can deliver up to 450, 000 IOPS – nearly 10x the performance of previous-generation RAID adapters. Advanced Data Protection Adaptec RAID Code (ARC) delivers maximum reliability with RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60 (71605E supports 0, 1, 1E, and 10, only). ARC also offers RAID Level Migration (the ability to
easily migrate RAID levels), Online Capacity Expansion (expand capacity without powering down the server), and Copyback Hot Spare (when a failed drive has been replaced, data is automatically copied from the hot spare back to the restored drive). New to Series 7 is its auto configuration capability. Users can operate in HBA mode (expose drives to the host directly) or Simple Volume mode (use fast DRAM cache to reduce latency and improve performance), without the need to use setup tools. In RAID mode, they can mix and match all devices and handle them at the same time. Connectivity Series 7 adapters support all types of devices including drives, tapes, autoloaders, external RAID systems. They support migration of disk drives from standard Host Bus Adapters (HBAs) as well as
onboard SATA or SAS interfaces from the motherboard. Introducing mini SAS HD Connectors These connectors allow for greater flexibility in configuration options by supporting up to 16 native SAS/SATA ports in a Low-Profile MD2 form factor and up to 24 SAS/SATA ports in a full-height half-length form factor. The new connectors can be combined with a wide range of Adaptec SAS HD cables, including straight connectors or Adaptec's first to market right angle connectors. Zero-Maintenance Cache Protection (ZMCP) Series 7 adapters can be combined with AFM-700, our third-generation flash-based cache protection module(sold separately) to enable instant battery-free protection of the data within the cache.* Adaptec maxView Storage Manager Adaptec maxView Storage Manager provides
the powerful features of Adaptec Storage Manager™ in an HTML5 web interface that can be viewed in standard desktop or mobile browsers without the need for separate software installation. Benefits Ideal for entry-level server to high-end server platforms and high-performance workstations without compromising robust 6Gb/s performance and proven Adaptec reliability. Key Software Features •Optimized Disk Utilization •Supported RAID levels: 0, 1, 1E, 5, 6, 10, 50, and 60 (72405, 71685, 71605, 7805) Supported RAID levels: 0, 1, 1E, and 10 (71605E) •HBA Mode and Simple Volume Mode for automatic deployment •Supports up to 256 SAS or SATA devices using SAS expanders •Hybrid RAID 1 & 10 •Quick initialization •Online Capacity Expansion •Copyback Hot Spare
•Dynamic caching algorithm •Native Command Queuing (NCQ) •Background initialization •Hot-plug drive support •RAID Level Migration •Hot spares - global, dedicated, and pooled •Automatic/manual rebuild of hot spares •SES and SAF-TE enclosure management •Configurable stripe size •S.M.A.R.T. support •Multiple arrays per disk drive •Dynamic sector repair •Staggered drive spin-up •Bootable array support •Support for Tape Devices, Autoloaders Data Transfer Rate 6 Gb/s per port Bus System Interface 8-lane PCIe Gen3 Form Factor •7805: MD2- Low Profile Cache Memory •7805: 1024MB Connector Configuration •7805: Two internal mini SAS HD (SFF-8643) Package Contents •Adaptec RAID 7805 adapter •Additional low profile vented bracket
•Adaptec RAID Installation DVD (bootable, incl. documentation, drivers & software)
least 16 6Gb/s SAS/SATA ports to double the bandwidth to the storage devices. Competing 6Gb/s solutions have only 8 ports, and cannot leverage that advantage. New Levels of Performance Series 7 adapters perform at up to 6.6 GB/s on sequential reads and up to 2.6 GB/s on sequential writes on parity RAID 5, more than doubling the performance of competing host-based RAID adapters. With 16 direct-connected solid-state drives (SSDs), Series 7 adapters can deliver up to 450, 000 IOPS – nearly 10x the performance of previous-generation RAID adapters. Advanced Data Protection Adaptec RAID Code (ARC) delivers maximum reliability with RAID levels 0, 1, 1E, 5, 6, 10, 50 and 60 (71605E supports 0, 1, 1E, and 10, only). ARC also offers RAID Level Migration (the ability to
easily migrate RAID levels), Online Capacity Expansion (expand capacity without powering down the server), and Copyback Hot Spare (when a failed drive has been replaced, data is automatically copied from the hot spare back to the restored drive). New to Series 7 is its auto configuration capability. Users can operate in HBA mode (expose drives to the host directly) or Simple Volume mode (use fast DRAM cache to reduce latency and improve performance), without the need to use setup tools. In RAID mode, they can mix and match all devices and handle them at the same time. Connectivity Series 7 adapters support all types of devices including drives, tapes, autoloaders, external RAID systems. They support migration of disk drives from standard Host Bus Adapters (HBAs) as well as
onboard SATA or SAS interfaces from the motherboard. Introducing mini SAS HD Connectors These connectors allow for greater flexibility in configuration options by supporting up to 16 native SAS/SATA ports in a Low-Profile MD2 form factor and up to 24 SAS/SATA ports in a full-height half-length form factor. The new connectors can be combined with a wide range of Adaptec SAS HD cables, including straight connectors or Adaptec's first to market right angle connectors. Zero-Maintenance Cache Protection (ZMCP) Series 7 adapters can be combined with AFM-700, our third-generation flash-based cache protection module(sold separately) to enable instant battery-free protection of the data within the cache.* Adaptec maxView Storage Manager Adaptec maxView Storage Manager provides
the powerful features of Adaptec Storage Manager™ in an HTML5 web interface that can be viewed in standard desktop or mobile browsers without the need for separate software installation. Benefits Ideal for entry-level server to high-end server platforms and high-performance workstations without compromising robust 6Gb/s performance and proven Adaptec reliability. Key Software Features •Optimized Disk Utilization •Supported RAID levels: 0, 1, 1E, 5, 6, 10, 50, and 60 (72405, 71685, 71605, 7805) Supported RAID levels: 0, 1, 1E, and 10 (71605E) •HBA Mode and Simple Volume Mode for automatic deployment •Supports up to 256 SAS or SATA devices using SAS expanders •Hybrid RAID 1 & 10 •Quick initialization •Online Capacity Expansion •Copyback Hot Spare
•Dynamic caching algorithm •Native Command Queuing (NCQ) •Background initialization •Hot-plug drive support •RAID Level Migration •Hot spares - global, dedicated, and pooled •Automatic/manual rebuild of hot spares •SES and SAF-TE enclosure management •Configurable stripe size •S.M.A.R.T. support •Multiple arrays per disk drive •Dynamic sector repair •Staggered drive spin-up •Bootable array support •Support for Tape Devices, Autoloaders Data Transfer Rate 6 Gb/s per port Bus System Interface 8-lane PCIe Gen3 Form Factor •7805: MD2- Low Profile Cache Memory •7805: 1024MB Connector Configuration •7805: Two internal mini SAS HD (SFF-8643) Package Contents •Adaptec RAID 7805 adapter •Additional low profile vented bracket
•Adaptec RAID Installation DVD (bootable, incl. documentation, drivers & software)
%20RAID%20Adapter%20-%20Single "Pin It")
Product Description
Reviews/Comments
Add New
Intelligent Comparison
Available
Adaptec 8805 SAS/SATA 8 Internal Port RAID Adapter - Single Ebuyer
£546.99
Available
Adaptec 8885 SAS/SATA (8 Internal/8 External Port) RAID Adapter - Single Ebuyer
£660.99
Available
Adaptec 2274200-R 7805 SAS/SATA (8 Int Port) RAID Adapter Kit Ebuyer
£576.99
Archived Product
Adaptec 2266800-R 5405Z SAS/SATA (4 Internal Port) RAID Adapter Ebuyer
£568.00
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark