A high quality ultra-violet filter designed to fit in front of your original camera lens & protect it from harmful UV rays & damaging dirt & grit. Fixes via the screw thread on your camera. Please check your camera manual for correct lens diameter. ...

30cm Cuddlekins Fennec Fox
- Wild Republic. A Fennec Fox plush soft toy from the Cuddlekins range made by soft toys designer Wild
...

Product Description With LC to LC termination, this high quality fibre optic patch cable is specifically designed for Fast Ethernet, fibre channel, ATM & Gigabit Ethernet applications. The small LC connectors satisfy the need for higher port density both in the telecom room & the work area, & offer twice the port density of traditional SC & ST fibre connectors. The LC connector with its RJ-style latch clip design is easy to engage & disengage, & gives each connection greater durability in resisting pulls, strains, snags, & impacts during cabling installs & maintenance. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) Cable: • Optical Multimode 1 (OM1) fibre supporting 200/500 MHz.km OFL at 850/1300 nm • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description Cost-effective solution that provides high bandwidth & transmission rates over longer distances. With LC to LC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) Cables: • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -55 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1550 nm: 0.25 d B/km • Attenuation at 1310 nm: 0.35 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, & 10 Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 3 (OM3) fibre supporting 2000 MHz.km EMB at 850 nm. • 10 Gigabit transfers up to 300 metres using 850 nm VCSEL source • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 1.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

The Imaging Drum Kit from Dell is specifically designed for use with Dell Color Laser Printer. This kit

Includes::

...

The 8000-Page Magenta Toner Cartridge from Dell is designed to work with the Dell 3110cn Color Laser Printer. This cartridge, when used in conjunction with the Black, Yellow & Cyan cartridges, can produce high-resolution color printouts with sharp images & text. ...

Thor copper hammers have a malleable Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow & the Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear & can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive & general engineering for assembly repair & maintenance. (No. 4 size hammer has a slip-on handle
- all other sizes have the usual wedge type handle fitted.)

Size: 2. Weight 1300 g. (3 lb.). Diameter 38 mm. (1 1/2 in).


...

Thor copper hammers have a malleable. Iron head fitted with two cylindrical faces of pure electrolytic copper on a wooden shaft. Available in 6 different weights. The malleable Iron head provides the weight for the blow & the the. Copper faces also provide weight whilst transferring the force to the item being struck without fear of damage. Ideal where a heavy blow is required combined with a relatively small striking area. These copper hammers have faces that are designed to wear & can be easily replaced as spare faces are available. They are used as a general-purpose soft-faced hammer in automotive & general engineering for assembly repair & maintenance. (No. 4 size hammer has a slip-on handle
- all other sizes have the usual wedge type handle fitted. )

Size: 3. Weight 1940 g. (4 lb). Diameter 44 mm. (1 3/4 in. ).


...

31MU97-B: 4K Supported Graphics Cards To ensure that your graphics card supports 4096 x 2160 resolution, please check compatibility & system requirements. 10-Bit Color Depth (1 billion colors) 10-bit color depth that supports over 1-billion colors is 64 times richer than an 8-bit color display, re-creating colors softly & naturally without color banding. Now, all the details are right before you with the richer & wider color range that enables accurate, detailed, & natural-looking images. Also, with smoother transition in gradients, the more shades in between let you work with images in more detail. IPS Display with Adobe RGB over 99.5% By supporting Adobe RGB over 99.5% on the IPS Display, the 31MU97 minimizes color difference & color loss with the wide color gamut & color temperature that covers both the s RGB & CMYK color range. As a result, one can effortlessly retouch & image photos to create final products with vivid & vibrant colors that VA or other LCD panels cannot deliver. DCP-P3 Digital Cinema Color Standard Editing on-site footage with the full color expression is possible with the 31MU97’s DCI color standard support which reproduces digital content color just like what you intended with the preview camera on site. Allows for accurate conditions such as shadow detail, color, saturation, & brightness for finer editing & overall control in the post production stage. Digital Cinema 4K Resolution The 31MU97 delivers 4K (4096 x 2160) resolution across a 31” display, providing crisp images with a significant amount of pixels on screen. 4K (4096 x 2160) resolution displays over four times the resolution of standard 1920 x 1080 FHD, & over half a million more pixels than UHD resolution (3840 x 2160) which makes you view even the finest details clearly to carry out intricate work for higher quality output Dual Color Space Compare the work done using both color modes simultaneously
- half of the screen in one mode & the other half in another
- color distortion & maintaining the original resolution are no longer a concern when it comes to output. With Adobe RGB & s RGB side-by-side, you can get an idea of how the final printable will look like with Adobe RGB mode & also can find out how the final output will be on websites with the s RGB mode at once. Total Color Management Through detailed color calibration testing, the 31MU97 maintains the color standard with software calibration & a factory preset, minimizing differences in color space & expressions between the original images, monitor screen, & printed result. MAXXAUDIO + 5W Speakers With two internal 5W speakers & the MAXXAUDIO functions, there is no need for separate high-end monitoring speakers. The 31MU97 which supports MAXXAUDIO delivers high quality sound with a wide range of vibrant, crisp, & clean high & low sounds while reviewing or editing 4K contents. Pivot / Height Adjustment The 31MU97’s pivot function enables you to not reduce size of photos or drag & scroll the vertically long photos all the way down any more. It also lets you could rotate origin pictures up to 90° depending on the ratio of the work space, giving you the perfect conditions to work under. By activating pivot function on your needs, 31MU97 allows fast & efficient work without any discomfort. Technical

Specification Display

Size: 31” IPS Panel LED Backlight Resolution: 4096 x 2160 Aspect Ratio: 17:9 Response Time: 5ms Contrast Ratio: 1M:1 Brightness: 250 cd/m-square Viewing Angle: 178°/178° Colour Gamut: Adobe RGB 99.5% Interfaces HDMI x 2 USB (Universal Serial Bus) 3.0 x 4 Display Port x 1 Mini Display Port x 1 Headphone Out x 1 Features Pivot Stand True Colour Pro (S/W) PC DDC/CI HDCP PBP (Picture by Picture) Plug & Play Factory Calibration Picture Mode Screen Split (S/W) Power Input Voltage: 100~240V, 50/60 Hz Power Consumption On: 49W Power Consumption Sleep mode: 1.2W

Dimensions & Weight

Dimensions with Stand (Wx Hx D): 736.6 x 482.6 ~ 622.3 x 241.3mm

Dimensions without Stand (Wx Hx D): 736.6 x 407.42 x 53.34mm Weight with Stand: 9.96kg Weight without Stand: 7.69kg











...