Your company's backbone is its Network. Without a stable, reliable network your company can't communicate. A lack of communication means a loss of revenue. What do you do now? Enter the Star Tech.com duplex 62.5/125 Multimode Fiber Optic patch cable assembly. This product provides the necessary link between Fiber networking devices for high-speed, long-distance networks. Each cable is individually tested & certified to be within acceptable optical insertion loss limits for guaranteed compatibility & 100% reliability. ...

This 2m (6.6ft) 62.5/125 micron Duplex Fiber Optic Patch Cable is terminated with one SC (male) connector & one LC (male) connector, to provide the necessary interconnect between fiber networking devices for high-speed, long distance networks. Each Duplex Fiber Optic Patch Cable is individually tested & certified to be within acceptable optical insertion loss limits for guaranteed compatibility & 100% reliability. ...

A high quality 2m (LC-ST) fiber patch cable constructed of 62.5/125 Multimode fiber, providing a high-performance link between fiber network devices. To ensure optimum performance, Star Tech.com multimode fiber duplex cable is individually tested & certified to be within acceptable optical insertion loss limits for guaranteed compatibility & 100% reliability. Star Tech.com LC-ST Multimode Fiber Patch cable is guaranteed to provide long-lasting dependability, & finest top quality performance. ...

The 50FIBLCST2 2m LSZH LC to ST Fiber Cable features 50/125 micron fiber for high-speed, high bandwidth data transmissions over Gigabit Ethernet & Fiber Channel networks, with support for duplex multimode applications. This LC-ST patch cable is housed in a LSZH (Low-Smoke, Zero-Halogen) flame retardant jacket, to ensure minimal smoke, toxicity & corrosion when exposed to high sources of heat, in the event of a fire. Making it ideal to be used in industrial settings, central offices & schools, as well as residential settings where building codes are a consideration. Each Duplex 50/125 (OM2) Multimode Fiber Patch Cable is individually tested & certified to be within acceptable optical insertion loss limits for guaranteed compatibility & 100% reliability & is backed by our lifetime warranty. LSZH-rated cable, suitable for installations under restrictive building codes High-speed, high bandwidth transmissions over Gigabit Ethernet/fiber channel networks Resistant to pulls, strains, & impacts during your cable installations & maintenance 1x LC MM male connector 1x ST MM male connector OM2 (50/125) 500 M Hz multimode fiber LSZH (Low-Smoke, Zero-Halogen) cable jacket Attenuation loss meets or exceeds industry standards Molded connectors Applications Use in Gigabit Ethernet & Fiber Channel applications Ideal solution for data applications requiring high speed data transmission Broadband systems Telecommunication/ Data communication Warranty Information Warranty Lifetime Hardware Fiber Size 50/125 Fire Rating LSZH Rated (Low Smoke Zero Halogen) Connector (s) Connector A 1
- Fiber Optic LC Male Connector B 1
- Fiber Optic ST Male Performance Fiber Classification OM2 Fiber Type Multi Mode Physical Characteristics Cable Length 2 m [6.6 ft] Color Orange Product Length 2 m [6.6 ft] Product Weight 0kg [0.1 lb] Packaging Information Package Quantity 1 Shipping (Package) Weight 0kg [0.1 lb] What's in the Box Included in Package 1
- 2m Multimode 50/125 Duplex Fiber Patch Cable LC – ST


...

The HDPSMM2M Pro Series High Speed HDMI cable (2m) features 2 gold-plated HDMI (male) connectors inside a metal connector molding, providing durable, high quality connections with a stylish look that offer the perfect finish for your home theatre or professional A/V environment. This 2-meter, lightweight HDMI cable also features thinner HDMI wire construction – roughly half the thickness of a regular 2m cable, which allows for a more flexible installation with minimal clutter. This high-end HDMI cable fully supports 1080p+ resolutions at up to 120 Hz refresh rate, with life-like color. To accommodate the demands of future high definition devices, such as increased resolutions & higher frame rates, this Ultra HD cable supports resolutions up to 4k x 2k. ...

Product Description This OM3 Duplex Multimode Fibre Optic Cable is ideal for connecting 10 G Base-SR, 10 G Base-LRM, SFP+ & QSFP+ transceivers for 10 gigabit network connections. This cable has a LSZH jacket which protects from toxic & corrosive gases in poorly ventilated spaces & other areas where it is most critical. This cable also provides backward compatibility with existing 50/125 equipment & the performance headroom required to support LED & VCSEL laser light sources, & 10 Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 3 (OM3) fibre supporting 2000 MHz.km EMB at 850 nm. • 10 Gigabit transfers up to 300 metres using 850 nm VCSEL source • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

The ISAS88702 Serial Attached SCSI Cable is designed for high-performance networks, servers, workstations & desktops. This SAS cable features a SFF-8470 connector & a SFF-8088 (external mini-SAS) connector that supports data transfer rates up to 6 Gbps. The SFF-8470 to SFF-8088 SAS cable is constructed of high quality materials. ...

The ESATA2M 2m Shielded e SATA cable provides a high quality connection between your desktop or laptop computer & an external SATA storage device, & is compliant with SATA III specifications, supporting data transfer rates of up to 6 Gbps. Designed for optimum performance & reliability, this 2m e SATA cable is backed by our lifetime warranty. The Star Tech.com Advantage
- Shielded to protect against EMI/RFI interference for external SATA connections
- Guaranteed reliability

...

Product Description Cost-effective solution that provides high bandwidth & transmission rates over longer distances. With ST to ST termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cables: • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -55 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1550 nm: 0.25 d B/km • Attenuation at 1310 nm: 0.35 d B/km • Operating Temperature: -20°C to +70°C



...