Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

The ESATA1M 1m Shielded e SATA cable provides a high quality connection between your desktop or laptop computer & an external SATA storage device, & is compliant with SATA III specifications, supporting data transfer rates of up to 6 Gbps. Designed for optimum performance & reliability, this 1m e SATA cable is backed by our lifetime warranty. The Star Tech.com Advantage
- Shielded to protect against EMI/RFI interference for external SATA connections
- Guaranteed reliability

...

The SMFIBLCSC1 1-meter (3.3ft) Single Mode Duplex Fiber Cable is terminated with one LC (male) connector & one SC (male) connector, to provide the necessary connection between fiber networking devices for high-speed, long distance networks. Each Single Mode Duplex Fiber Cable is individually tested & certified to be within acceptable optical insertion loss limits for guaranteed compatibility & 100% reliability. The Star Tech.com Advantage Fiber Optic cables provide a higher quality signal over a greater distance Fiber Optic cables are an ultimate solution for high-speed data transmission Backed by Star Tech.com lifetime warranty ...

Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

Product Description Cost-effective solution that provides high bandwidth & transmission rates over longer distances. With ST to ST termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cables: • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -55 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1550 nm: 0.25 d B/km • Attenuation at 1310 nm: 0.35 d B/km • Operating Temperature: -20°C to +70°C



...

The PXTNB2SEU1M 1m Laptop Power Cord features one EU plug (CEE 7/16) & one 2-prong C7 connector, making it a suitable replacement cable for a Lenovo, IBM or other compatible laptop equipped with a C7 power connection. ...

Product Description Replace your overused or misplaced power cable, or just get some extra cords for convenience. This power cord is designed to work with laptops that use a 3-slot power cord. This 18 AWG cord features a fully moulded design for maximum durability & long life. The female connector, often called a Clover Leaf connector, plugs directly into the device while the male connector plugs into a standard outlet. ...

Product Description Replace your overused or misplaced power cable, or just get some extra cords for convenience. This non-polarized power cord is designed to work with laptops, gaming consoles & other audio/video equipment that uses a 2-slot non-polarized power cord. Plus this heavy duty 18 AWG cord features a fully melded design for maximum durability & long life. The female connector, often called a figure of 8, plugs directly into the device while the male connector plugs into a standard power outlet. ...

The USB3SAB1M 1m USB (Universal Serial Bus) 3.0 A-to-B cable means that you can connect your USB (Universal Serial Bus) 3.0 type-B devices, such as your hard drive enclosures, card readers, docking stations & video capture devices. The USB (Universal Serial Bus) 3.0 cable features high quality Shielded Twisted Pair (STP) construction, which helps to prevent electro-magnetic interference & ensures reliable data communication. The 1m cable is backed by Star Tech.com's Lifetime Warranty, providing guaranteed quality & reliability. Warranty Information Warranty Lifetime Hardware Connector Plating Nickel Cable Jacket Type PVC
- Polyvinyl Chloride Cable Shield Type Aluminum-Mylar Foil with Braid Connector (s) Connector A 1
- USB (Universal Serial Bus) 3.0 A (9 pin; Super Speed) Male Connector B 1
- USB (Universal Serial Bus) 3.0 B (9 pin; Super Speed) Male Performance Type & Rate USB (Universal Serial Bus) 3.0
- 5 Gbit/s Physical Characteristics Color Blue Wire Gauge 28 AWG Cable Length 1 m [3.3 ft] Product Length 1 m [3.3 ft] Product Weight 52 g [1.8 oz] Packaging Information Package Quantity 1 Shipping (Package) Weight 58 g [2 oz] What's in the Box Included in Package 1
- 1m Super Speed USB (Universal Serial Bus) 3.0 Cable A to B
- M/M





...

Features USB3.1 (also called Gen.2) brings many improvements to the previous standard USB3.0 (Gen.1). The most noticeable is the new Type-C connector which is much smaller & reversible. The Type-C connector is backwards compatible & can be used with USB3.0 PCs & devices. Type A to Type C This cable features both a Type-A socket & a Type-C connector making it the perfect solution for converting a new Type-C socket into a Type-A socket. Perfect for plugging your USB (Universal Serial Bus) flash-drive into a modern ultrabook. Reversible Connector The new USB (Universal Serial Bus) Type-C connector is smaller than most of the previous USB (Universal Serial Bus) connectors. (Micro B is the exception.) It is also symmetrical; this means that you can plug the connector in either way up. ...