The MXTHQMM10MA 10-meter High Resolution VGA Cable with Audio is a high quality SVGA cable designed to provide the highest video quality possible through VGA
- a single cable solution for connecting both video between a VGA video card & monitor, & audio connections between a sound card & external audio device. Star Tech.com’s high resolution VGA cable with audio features high quality male-to-male coaxial VGA cable, & is designed to eliminate picture "ghosting" & fuzzy images that are inherent to non-coaxial cables, while delivering superior EMI interference protection by using ferrite cores near the connector ends. The 10-meter SVGA cable (VGA Cable with Audio) is backed by Star Tech.com’s Lifetime Warranty. The Star Tech.com Advantage Extends your VGA signal to work with your monitor, splitters, & projectors 3.5mm stereo plugs at each end provide audio & video connections on a single cable Backed by Star Tech.com Lifetime warranty
...

Product Description Cost-effective solution that provides higher bandwidth & transmission rates & supports longer distances with lower loss than 62.5/125 fibre. Specifically designed for use with today's narrower aperture components, this cable is fully compatible with multimode applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip) • ST Connector Dimensions: 9.8mm Height x 19.6mm Width x 59mm Depth Cable: • Optical Multimode 2 (OM2) fibre supporting 500 MHz.km OFL at 850/1300 nm. • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -25 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1300 nm: 1.0 d B/km • Attenuation at 850 nm: 3.5 d B/km • Operating Temperature: -20°C to +70°C



...

This 50/125 micron Multimode Fiber Optic Patch Cable is terminated with LC (male) connectors to provide the necessary interconnect between fiber networking devices for high-speed, long distance networks. Each Multimode Fiber Optic Patch Cable is individually tested & certified to be within acceptable optical insertion loss limits for guaranteed compatibility & 100% reliability. ...

Product Description Cost-effective solution that provides high bandwidth & transmission rates over longer distances. With SC to SC termination, this high quality fibre optic patch cable is specifically designed for Gigabit Ethernet applications. The Low Smoke Zero Halogen (LSZH / LS0H) jacket is composed from materials that lessen the smoke & halogen emissions when the cable is exposed to extreme temperatures. This reduces the amount of harmful toxic & corrosive gases that cabling made with plastic materials would otherwise emit into the air during combustion. This construction makes LSZH cables ideal to be used where the protection of people & equipment from harmful corrosive gases is absolutely critical. The patented injection moulding process provides each connection greater durability in resisting pulls, strains & impacts from cabling installs. Connectors: • SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip) Cables: • Maximum Connector Loss: 0.50 d B • Typical Connector Loss: 0.30 d B • Typical Return Loss: -55 d B • Buffer

Material: PVC • Buffer OD: 900 µm • Jacket

Material: LSZH PVC (OFNR riser-rated) • Jacket OD: 2.8 mm • Installation Tensile Load: 100 N (445 lbs) • Long-Term Tensile Load: 50 N (222 lbs) • Maximum Tensile Load: 100 N/cm • Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in) • Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in) • Crush Resistance: 750 N/cm • Impact Resistance: 1, 000 cycles • Flex Resistance: 5, 000 cycles • Attenuation at 1550 nm: 0.25 d B/km • Attenuation at 1310 nm: 0.35 d B/km • Operating Temperature: -20°C to +70°C



...

Draper Tools 10 piece Diamond Needle File Set. Chromium plated & diamond coated 150 grit, comprising flat parallel, flat tapered, round, half round, square, three square, oval, crossing, barrette & knife with moulded plastic handles. Packed in handy see-through? plastic case. ...

Plenty of Room. & Then Some. Seagate Backup Plus Desktop drives are available in capacities up to 10 TB & come with a USB (Universal Serial Bus) 3.0 hub option. With cross-platform compatibility, exceptional reliability & speed, you can back up just about everything. Take advantage of the Backup Plus Hub drive which doubles as an all-in-one data hub & recharging station built into a desktop drive with phenomenal capacities. Back Up. Connect. Recharge. Equipped with two integrated USB (Universal Serial Bus) ports on the front, you can back up your files, precious photos & videos while connecting to & recharging your tablet, smartphone or camera — even if your system is off or in standby mode. Features Included With All Backup Plus Desktop Drives Simple PC Backup Your favourite files, photos & videos can be easily backed up from your PC using downloadable Seagate backup software. Mac & Windows Ready It’s easy to use your Backup Plus Portable Drives interchangeably on PC & Mac computers — without needing to reformat. Just install NTFS drivers on your Mac & you’re good to go. Create Amazing Photos. Amazingly Simple. Easily edit, organise, store, & share your full-resolution photos from anywhere with a 2-month complimentary membership to Adobe Creative Cloud Photography Plan 1. Edit photos with a powerful & easy-to-use interface on Lightroom CC. Combine images into rich, multilayered artwork with Photoshop CC. ...

10x 50 DPS I
- 10x magnification
- Durable high-quality finish with sure-grip rubber coating
- UV ray protection for worry-free


...

With any CCTV system it’s essential the cameras are installed correctly. If you purchase your CCTV system from Ebuyer.com we can take away all the stress by installing your non-IP cameras for you. Purchase your CCTV cameras as normal & add this product to your basket. We will then contact you to arrange a suitable time & date to install your new equipment. Please note this product is for the installation of 11 (eleven) non IP CCTV cameras. The cost of this product

Includes:: installation only & not the cost of the camera itself. To use this service your CCTV cameras must be purchased from Ebuyer.com. What’s included in this service? On arrival at your property our engineer will: Unpack DVR (if applicable), cameras & cabling. Mount cameras in your desired locations. Position camera view to your direction. Ensure cables are neatly pinned to the wall. Single entry hole to feed cables. Fill all holes with Silicon filler for protection against weather. Connect Ethernet cable from DVR to modem. Please note
- Ethernet Powerline twin set is required if modem is located more than one metre away from DVR. Download App to customer phone for supported phone. Set up App on your phone. Allow you to create your own log in. Allow you to view CCTV on mobile device (limited to 1 device). Finally our engineer will demonstrate the basic features of your new equipment to you. Important notes Please note the following restrictions: Property can only be a maximum of two stories high. Only 20 meters of cabling per camera. All goods must be on site prior to engineer arriving to complete works. Engineers will try their best to avoid damage to interior & exterior walls but cracks can occur due to impact of drilling. Before our engineer arrives Please ensure: You have a minimum Internet speed of 4mbps download & 0.5mbps upload. All cables are onsite including cat 5 cable. All passages are clear for engineer to move around without hindrance to complete the work & installation. You are responsible for the provision of a suitable monitoring device (TV/ Monitor etc.) to view the CCTV imagery produced by the DVR unit (HDMI/ VGA) You have the username & password for your broadband router to h&. Your router must be less than 18months old to enable port forwarding. Additional information There are certain installation conditions & circumstances that will require an on-site"e from the technician. This will be agreed before the installation commences. Additional parts are sometimes required to complete an installation; these parts can be purchased on site. Payment will be taken via phone – no cash transaction between customers & engineers are allowed or accepted onsite. Final camera mounting positions will be governed by available viewing angles & safe ladder access. Excess cabling maybe left behind the DVR/ Monitor unit.


...

11 pce. Assembly screwdriver assortment with exchangeable blades.

Features: Energy control with revolution

...

11-piece 1000V Insulated Screwdriver & Pliers Set You could be installing sockets, fitting lights or changing a plug. But whatever the task, if youre working with electrical systems or electronic goods insulated tools are the sensible choice. Insulated tools are a way to protect yourself & avoid expensive damage. The Isprotek 11-piece set comes in a durable zippered storage case so is highly portable. It contains a variety of useful carbon steel tools with PP & TPR handles, including screwdrivers (in a variety of sizes & both head shapes). The set also contains cutters & pliers, plus an electrical voltage testing meter. Features Insulated tools

Includes:: durable zippered storage case Great portable toolkit Contents 4 x flathead / slot 1000V electrical insulated screwdriver (2.5 x 75mm / 3.0 x 100mm / 5.5 x 125mm / 6.5 x 150mm) 3 x crosshead / Phillips 1000V electrical insulated screwdriver (PH0 x 60mm / PH1 x 80mm / PH2 x 100mm) 6" insulated long nose pliers 6" insulated side cutter 7" insulated combination pliers Electrical voltage tester with 110 to 250V AC testing range

...