Wera series 160 i/7 Insulated screwdriver sets are tested individually for dielectric strength under a load of 10000 volts so as to ensure safe working with loads up to 1000 volts. They have a premium Gold Lasertip a tip which has a laser roughened surface which literally bites into the screwhead reducing cam-out & eliminating the need for two-handed screwdriving. They have a significantly extended service life due to bit-grade steel used in all Wera screwdrivers & have the patented Kraftform handle which is ergonomic multi-component & which uniquely fits to the shape of the hand during screwdriver use reducing fatigue & increasing speed. Smooth soft zones offer enhanced grip hard zones allow easy hand repositioning. Set of 7.1 each of the following: Slotted: 2.5 x 80 mm. 3.5 x 100 mm. 4.0 x 100 mm. 5.5 x 125 mm. Pozidriv: PZ1 x 80 mm. PZ2 x 100 mm. Voltage tester 3.0 x 70 mm. ...

14 Piece bit set in a compact case comprising of the following: 1 x Bayonet bit holder, 1 x Bayonet holder with Quick-Release, 6 x Torx bits, Tx 10, Tx 15, Tx 20, Tx 25, Tx 30, Tx 402 x Pozidriv bits, Pz 1, Pz 22 x, Phillips bits Ph 1, Ph 22 x Slotted bits 4.5 mm. 5.5 mm. ...

This is a must for all Tradesman if carrying tools or machinery in a van or just keeping them in a garage or double door shed. This Abus VANLOCK is suitable for vans trucks garages sheds or any other outward opening double doors. This strong lock is supplied complete with an Abus 23/70 70 mm. high security chrome padlock. The lock is easy to fit by simply drilling the holes for the securing bolts through the van doors or shed doors you are fitting it to. It is a small compact unit with a convenient one handed key operation to lock & unlock. Unlike many other van security locks it has no removable parts so you will not lose them. The Abus VANLOCK is corrosion resistant & easy to fit. It comes complete with all the fixings to complete the job. A main feature of the Abus VANLOCK is the strong steel construction which provides maximum all-round protection against all forms of attack. You can be assured that your expensive & cherished tools or machinery are safe & sound from thieves. Specification: Padlock: Overall diameter: 70 mm. Overall

Depth: 31 mm. Shackle

Width: 19.5 mm. Shackle

Height: 17 mm. Shackle Dia: 10 mm.





...

The Wera 932 series rugged flared slotted tipped. Chisel driver has been designed to be hit with a hammer whilst remaining fully useable as a screwdriver with impact cap & pound-thru hexagon blade. The blade is made from same bit-grade steel as all. Wera products & has a hexagonal profile for added strength the hexagon bolster allows spanner leverage for increased torque. Application: Slotted Screws & Light Chisel work. Handle: Three Combinations with Anti Roll Protection. Tip

Size: 12 mm. Blade Length: 250mm.

...

Chiseldriver Screwdriver Set with Hexagon Pound. Thru Blades with Impact Cap, Hexagon Bolster & 3 Component Anti. Roll Protection Handles Set comprises: 1 each Slotted: 3. 5 x 80mm, 4. 5 x 90mm, 5. 5 x 100mm, 70 x 125mm Pozidriv: PZ1 x 80mm, PZ2 x 100mm. ...

Wera Rapidaptor 889/4 Universal Quick Release Bit Holder 50 mm. Carded WER073421 Application: For 1/4 in. DIN 3126-C 6, 3 und E 6, 3 (ISO 1173) hexagon insert bits & Wera Series 1 & 4 Design: Rapidaptor easy-in, easy-out, rapid-spin, chuck-all, & single-hand technology, with strong permanent magnet. Capacity 1/4 in. Shank 1/4 in. WER073421. ...

Application: For 1/4 in. DIN 3126- C 6, 3 und E 6, 3 (ISO 1173) hexagon insert bits & Wera Series 1 & 4 Design: Rapidaptor easy-in, easy-out, rapid-spin, chuck-all, & single-hand technology, with strong permanent magnet Capacity 1/4 in. hank 1/4 in. ength 50 m. ...

Application: For 1 / 4in DIN 3126 C 63 und E 63 (ISO 1173) hexagon insert bits & Wera Series 1 & 4 Design: Rapidaptor easy in easy out rapid spin chuck all & single hand technology with strong permanent magnet Capacity 1 / 4in Shank 1 / 4in 100 mm Length. ...

Wera SB 1 38 Piece Tool -Check. Highlights & details. 38 parts. Compact. Mobile. Universal. Description: 28 bits; 1 870/1 socket adaptor (1/4" hexagonal to 1/4" square); 7 manual andpower tool sockets; 1 Rapidaptor bit holder; 1 Wera Bit Ratchet, with drop-forged steel design suitable for the fitting of bits with 1/4" hexagonal headed drive as per DIN 3126-C 6.3 & E 6.3 (ISO 1173), i.e. Wera Series 1 & 4. Can also be used with 1/4" sockets by using the socket adaptor (870/1). ...

Application: For 1/4 in. DIN 3126-C 6, 3 (ISO 1173) hexagon insert bits & Wera Series 1. Design: With stainless steel sleeve, retaining ring, & strong permanent magnet. Drive: 1/4 in. hexagon, suitable for power tools with DIN 3126-F 6, 3, ISO 1173 receiver. Magnetic bit holder for use with screwdriver bits. 1/4 in. Drive 1/4 in. Capacity: 152 mm. ...