A seven piece template set that allows elliptical picture frames & plaques/plints to be routed. Made from clear 8 mm. thick laser cut plastic. The four picture frame templates & three plaque templates are supplied with pinholes so that they can be secured to the component, or alternatively they can be secured with hot melt glue or double sided sticky tape. Use with a bearing guided 12.7 mm. Diameter: template profiler or laminate trimming router cutter, in a router table or portable use. Back of frame requires 12.7 mm. guided rebate cutter. Frame Sizes= 7 x 9. Plaque Sizes= 3 x 2. Frame Sizes= 5 x 7. Plaque Sizes= 5 x 3 1/2. Frame Sizes= 3 1/2 x 5. Plaque Sizes= 5 29/32 x 4 3/8. Frame Sizes= 6 29/32 x 8 29/32. These two templates are used to create the backs of the three picture frames 7 x 9, 5 x 7 & 3 1/2 x 5. ...

Clear plastic template for use with any plunge router to accurately fit three sizes of letter box plates. Made from 8mm thick clear plastic. Use on wooden doors up to 50mm thick. Use with 1/2inch collet plunge router. Requires 12mm cutter & 30mm guide bush. A Unibase may be required for certain makes & models of router. Router not included. Template size=326mm x 290mm x 8mm Letterbox plate sizes 220mm x 50mm 210mm x 60mm 200mm x 60mm ...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR12 features a solid carbide insert & centre tip for drilling. Dimensions: Shank: 1/4 in. Cutting Diameter (D): 12 mm. Cutting Length (C): 19 mm.

...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR17D have a center tip for drilling abrasive materials & are designed to work with the Trend Worktop jigs. Dimensions: Shank: 1/4 in. Cutting Diameter (D): 12.7 mm. Cutting Length (C): 50.0 mm.

...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. TR18D have a centre tip for drilling abrasive materials. Dimensions: Shank: 1/2 in Cutting Diameter (D): 12.7 mm. (1/2 in) Cutting Length (C): 63 mm.

...

Trend Trade range two flute router cutters have extra long Shank s & are designed to meet the demanding needs of the professional trademen. They have a 2 mm. micrograin Tungsten Carbide tips for cutting the most abrasive materials to give extra long life. They have a PTFE coat indicated by distinctive black colouring & produce a clean finish to abrasive timbers such as chipboard MDF plywood & certain hardwoods. The

Dimensions are etched on the extra long 40 mm. Shank s for quick identification & are suitable for mortice & worktops applications. The TR37 is suitable for use with Trend Lock Jigs. Dimensions: Shank: 1/2 in Cutting Diameter: 12 mm. Cutting Length: 63 mm.

...

For fast & accurate joining of timber & plywood giving strong instant joints. Solid hardened bushes with variable pitch of 29 mm. to 63 mm. Use on timber MDF plywood & blockboard. Allows a variety of joints to be created individually. Uses square drive self tapping screws. Workpiece can be handled immediately after gluing & screwing creating time saving benefits. No clamps required. Specifications

Material: thickness min: 16 mm.

Material: thickness max: 38 mm.

Material: width min: 38 mm. Hole pitch: 29 mm-63 mm. Drill diameter: 9.5 mm. Square drive bit

Size: No. 2 Screw

Sizes: No. 7 x 30 mm. Supplied with: 100 x Dome head screws, 1 x Face clamp, 1 x HSS drill bit with collar, 1 x 75 mm. Square drive bit 1 x 150 mm. Square drive bit.









...

Fast -Identifies & blocks new & emerging threats before they impact your business. -Protects without affecting your performance or speed. -Virus scans run in the background so your computers are unaffected. Effective -Stops viruses, spyware, & other web threats before they can reach your business. -Data loss prevention stops private business information from being shared via USB (Universal Serial Bus) drives & other attached storage devices as well as in email messages. -URL filtering keeps employees from inappropriate & infected websites. Simple -Specifically designed for businesses with limited IT staff. -Easy to install & use, no IT expertise required. -Security status at-a-glance & easy-to-read security reports. ...

Trend guide bushes can be attached to the base of the Router. They are designed to follow the contours of a template. Guide bush guides the router when using a template. Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 & T11, & some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base. ...

The 16-Port Gigabit GREENnet Switch, model TEG-S16g, provides high bandwidth performance, ease of use, & reliability, all while reducing power consumption by up to 70%*. GREENnet technology automatically adjusts power voltage as needed, resulting in substantial energy savings. Embedded GREENnet technology works right out of the box with no management requirement. Boost office network efficiency & eliminate network congestion with Gigabit speeds & a total switching capacity of 32 Gbps with Full-Duplex mode. A built in universal power supply reduces cable clutter & diagnostic LEDs help with network troubleshooting. Plug & Play this sturdy metal switch for reliable high-speed network connectivity. Features 16 x 10/100/1000 Mbps Auto-MDIX Gigabit Ethernet ports On / off power switch Features a 32 Gbps forwarding capacity Internal power supply reduces clutter GREENnet technology reduces electrical power consumption when: Ethernet port is not in use Connected device is turned off Connected device is in power-saving mode Based on Ethernet cable length IEEE 802.3x Flow Control for full-duplex mode Back pressure Flow Control for half-duplex mode Store-&-Forward switching architecture with non-blocking wire-speed performance Integrated address look-up engine with an 8K MAC address table 2 M Bits RAM data buffer Operates & maximizes packet filtering & forwarding rate Jumbo Frame support up to 9216 Bytes Rackmount hardware included Sturdy metal housing Diagnostic LEDs & Plug & Play support 3-year limited warranty * Max power savings compared with standard TRENDnet switches ...