These cutters are self-guiding & can be used to produce rebates, lap joints, tongues & rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. D=31.8 mm. Cut length=15.9 =12.7 &9.5 mm. E=9.5 mm. E2=11.1 mm. Shank Diameter=1/2 inch. ...

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. D=44.5 mm. Cut length=22 mm. B=9.5 mm. B2=12.7 mm. R=5/8 inch. R=16 mm. Shank Diameter=1/2 inch. ...

Recessing cutter will accommodate the Schlegel Aquamac 63 weather strip system & allows for a particularly small gap between sash & frame. The slot can be positioned part way down the side of the rebate, or at the bottom of the rebate. D=41.3 mm. D2=28.3 mm. C=4.8 mm. C2=2.7 mm. Overall length=67 mm. B=22 mm. Shank Diameter=1/2 inch. ...

For either frame or door applications, with standard Intumescent Strip. Neatly cuts grooves on doors or frames to accept Intumescent Strip which enables the formation of effective barriers to both fire & smoke. By using alternative ball bearings diameters other seal thicknesses can be introduced. Alternative bearings can be purchased to suit other thicknesses. For 4.0 mm. thick & 10.0 mm. width intumescent strip. D= 40 mm. C= 10 mm. B= 32 mm. E= 4 mm. Shank Diameter= 1/2 inch. ...

Trend Intumescent cutter set for either frame or door applications with standard Intumescent Strip. It neatly cuts grooves on doors or frames to accept Intumescent Strip which enables the formation of effective barriers to both fire & smoke. By using alternative ball bearing diameters other seal thicknesses can be introduced. Alternative bearings can be purchased to suit other thicknesses. For 4.0 mm. thick & 10.0 mm. width intumescent strip. Diameter: 24 mm. Cutting

Depth: 10 mm. Bearing: 16 mm. Shank: 1/4 in.

...

An accurate & easy to use Dovetail Jig for a variety of elegant dovetail joints. Cuts 12. 7mm (1 / 2 inch) wide half blind dovetails or rebated dovetails in one operation. Precision made laser cut zinc plated steel template with packing piece. Adjustable offset stops. A Unibase & fine height adjuster may be required for certain makes of router. A range of accessory templates are available for box joint, dowel & through dovetails. Rating= Craftsman, Dovetail size=12. 7mm, Workpiece width max. =600mm, Workpiece thickness min=12mm, Workpiece thickness max. =25mm, Guide bush size=15. 8mm, Router base dia. max=180mm. ...

For use in router tables where there is a limited router cutters Shank length available. Precision machined one-piece steel body. With a 1/2 inch. Shank, fitted with a multi-slit spring steel collet & collet nut. Use at maximum speed 18000 RPM. Increase cutter spindle length by 50 mm. Maximum tool diameter 50 mm. Maximum tool cut length 30 mm. Requires 19 mm. & 22 mm. A/F spanners. Shank size=1/2 inch. Collet size d=1/2 inch. Overall length=72 mm. Maximum speed=18000 rpm. Maximum tool dia=50 mm. Maximum tool cut length=30 mm. ...

For accurate guiding of routers saws & jigsaws. Integral clamping jaws & a locking lever provide a quick way of clamping the guide batten. Instant edge-to-edge clamping Low profile
- no obstruction Instant sliding locking jaws Extra long handle 45 mm. wide extrusion T-Slot track for fitting accessories Facility for measurement scale Attachment points for fitting optional jaw accessories ALL CGS clamps will NOW accept router base plates saw base plates end stop blocks.
...

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=5/16 inch. D=7.9 mm. Cut length=3/4 inch. Cut length=19.1 mm. Shank Diameter=1/4 inch. ...

A range of Tungsten Carbide Tipped Circular Sawblades designed for a professional finish in soft wood, hard wood, plywood, soft fibre, plasterboard stone, fibre board, cement bonded board & particle board. Reamed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened & tempered to maintain trueness. Laser etched on reverse to European standard EN847 1 / 2. The Trend name for traceability & a guarantee of quality. High grade alloy steel palate body precision ground to maintain flatness. Microgranular Tungsten Carbide Tipped to allow cutting of abrasive materials. D=6 inches D=150 mm Bore=20 mm Kerf=2. 4 mm Plate thick=1. 5 mm No. of Teeth=24 Tooth form=ATB. ...