About Us
Contact Us
Privacy Policy
Cookie Usage
Add Your Store

More From Contributor

image missing
Trend Bcs 24 Bar
Clamp Spreader 24 Inch
610mm
£28.49
A range of one handed bar clamp & spreaders for a variety of clamping applications. One handed operation. Ergonomically designed glass reinforced nylon plastic handles with thermal plastic rubber grips for comfort. Clamping force 112kg (247 Ibs). 1100 Nm. Heavy duty mechanism with precision engineered carbon steel bar for rigidity. Removeable thermal rubber pads. Max Throat Depth (D)=80 mm (3 1 / 8 inch) Max Opening (O)=610 mm (24 inch) Spreading capacity=170 mm (6 3 / 4 inch) to 812 mm (32 inch) Steel Section (S)=19 mm x 6 mm Weight=1010g. ...
Available
image missing
Trend Bsc 10 1000
Biscuits
£32.99
Biscuit jointing has proven to be one of the strongest fastest safest & most accurate ways to join hard & soft woods plywood composition boards etc. Compared to dowelling biscuit joinery is faster & more precise. The biscuits are made from laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue). Size. No. 10. Packed in 1000s. ...
Available
image missing
Trend Bsc/20/1000
Biscuits
£34.49
Biscuit joining has proven to be one of the strongest, fastest, safest & most accurate ways to join hard & soft woods, plywood, composition boards etc. Compared to dowelling, biscuit joinery is faster & more precise. The biscuits are made from laminated beech which is then compressed before being die cut. Beechwood biscuits expand up to 20 per cent when in contact with a woodworking adhesive. (e. g. PVA Glue). Size. No. 20. Packed in 1000 s. Size; 60 mm. x 23 mm. x 4 mm. ...
Available
image missing
Trend Bsc/mix/100
Biscuit Mixed 0 10 20
1oo Off
£9.50
Trend biscuits are made from die cut beech. Beechwood biscuits which expand when in contact with a woodworking adhesive such as P V. A glue. They are ideal for strong, fast, & accurate jointing of hard & soft woods, plywood & composition board. Compared to doweling, biscuit jointing is faster & more precise. ...
Available
image missing
Trend C001 X 1/4
Tungsten Carbide Two
Flute 3.2mm
£13.00
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. Diameter
- 1/8 in. 3.2 mm. Cutting Length
- 3/8 in. 9.5 mm. T.C.T. 2 Flutes.

...
Available
Trend C007 X 1/4 Tungsten Carbide Two Flute 6.3mm
Trend C007 X 1/4
Tungsten Carbide Two
Flute 6.3mm
£9.50
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 1/4 in. 6.3 mm. C
- Cutting Length
- 3/4 in. 19.1 mm. T.C.T. 2 Flutes.



...
Available
Trend C012bx1/4tc Router Cutter 1/4 Tc
Trend C012bx 1/4tc
Router Cutter 1/4 Tc
£10.00
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D=23/64 inch. D=9 mm. Cut length=3/4 inch. Cut length=19 mm. Shank Diameter=1/4 inch. ...
Available
Trend C013x1/4tc C013 X 1/4 Tct Two Flute 9.5mm
Trend C013x 1/4tc C013
X 1/4 Tct Two Flute
9.5mm
£10.49
Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter:
- 3/8 in. 9.5 mm. C
- Cutting Length
- 1 1/4 in. 31.8 mm. T.C.T. 2 Flutes.



...
Available
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm
Trend C014 X 1/4
Tungsten Carbide Two
Flute 9.5mm
£10.49
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. D1 3/8 inch. D1 9.5 mm. Cut length 1 inch Cut length 25.4 mm. Shank Diameter 1/4 inch. ...
Available
Trend C016 X 1/4 Tungsten Carbide Two Flute 10.0mm
Trend C016 X 1/4
Tungsten Carbide Two
Flute 10.0mm
£17.10
Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 10 mm. C
- Cutting Length
- 19.1 mm. T.C.T.



...
Available

Trend C005 X 1/4 Tungsten Carbide Two Flute 6.0mm

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating and shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood and chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D - Diameter - 15/64 in. 6.0 mm. C - Cutting Length - 5/8 in. 16 mm. T.C.T. 2 Flutes.
Buy
Availability: In Stock
£13.00
computer components DEFAULT
Description Reviews / Comments Add New

Product Description

Suitable for a wide range of applications such as engraving, grooving, rebating & shallow mortising. Use on softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. Two fluted Tungsten Carbide Tipped straight cutters which are suitable for a wide range of applications such a engraving, grooving, rebating & shallow mortising. They can be used on a wide range of materials such as softwoods, hardwoods, MDF, plywood & chipboard. All cutters have a bottom cut feature. When deep cuts are required, more than one pass should be taken. Shank. 1/4 in. D
- Diameter
- 15/64 in. 6.0 mm. C
- Cutting Length
- 5/8 in. 16 mm. T.C.T. 2 Flutes.

Reviews/Comments

Add New

Intelligent Comparison

Available
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm
Trend C014 X 1/4 Tungsten Carbide Two Flute 9.5mm Ebuyer Business
£10.49
Available
Trend 3/50 X 1/4 Tungsten Carbide Two Flute Cutter
Trend 3/50 X 1/4 Tungsten Carbide Two Flute Cutter Ebuyer Business
£20.00
Available
Trend 3/01 X 1/4 Tungsten Carbide Two Flute Cutter
Trend 3/01 X 1/4 Tungsten Carbide Two Flute Cutter Ebuyer Business
£16.00
Available
Trend 3/02 X 1/4 Tungsten Carbide Two Flute Cutter
Trend 3/02 X 1/4 Tungsten Carbide Two Flute Cutter Ebuyer Business
£17.00
Available
image missing
Trend 3/08 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer Business
£19.00
Available
Trend 4/80 X 1/2 Tungsten Carbide Two Flute Cutter
Trend 4/80 X 1/2 Tungsten Carbide Two Flute Cutter Ebuyer Business
£37.00
Available
Trend 46/80 X 1/4 Tungsten Carbide 3 Flute Trimmer
Trend 46/80 X 1/4 Tungsten Carbide 3 Flute Trimmer Ebuyer Business
£23.00
Available
Trend S3/22 X 1/4 Tungsten Carbide Two Flute Cutter
Trend S3/22 X 1/4 Tungsten Carbide Two Flute Cutter Ebuyer Business
£29.50

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Diameter - A measurement across a circle passing through the middle
cutting - The seperation of an object usually using a cutting tool such as a knife
Wide - Something with a large width.
Flute - A long silver instrument with buttons to press to make different notes.
Chipboard - A piece of wood like material that us used to pin paper and notes too.
MDF - A shortened term for Medium Density Fibreboard
Feature - An attribute that makes something stand out.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu