Thermaltake Chaser A71 This new full tower chassis of Chaser hardcore gaming series, designed for gamers to gear with the latest gaming component, offering not only style & personality but an exceptional combination of cooling, performance, versatility & adaptability to any configuration for gaming purists to ensure true enjoyment while in or out of the game. Key Features E-Sport Design - The black metal meshed highlighted with blue fluorescence stripes on the front panel combined with a windowed side panel, it hard not to get attention on! Easy Hot-Swap - Top-mounted 2.5 or 3.5HDD Docking Station enables blazing fast file transfer & effortless hot-swap drive replacement. Supreme Ventilation - Preinstalled one 120mm rear fan three large 200mm fans located at front, top-mounted & side including blue LED to optimize system cooling solution for extreme airflow. In order to keep the interior dust free, all intake ventilation holes come with dust protection including a removable dust filter at the bottom of the chassis. Innovative tool-less design - Innovative 5.25 & 3.5 tool-free drive bay design minimized the troubles of installing ODD, HDD & SSD devices for more expandabilities. Convenient Support - Two retained holes with rubber grommet to support LCS, five retained holes for advanced cable management, one large CPU cut-out to ease on CPU cooler installation High-end Complete System on the go - Enables user to simply build up a complete high-end water cooling solution with 240mm radiator liquid cooling system & extra long graphic card supported to protect users hardware & increase CPUs overclocking potential, most importantly delivers outstanding cooling efficiency in the entire case. Stress-free Cable Management - Wide cable routing gap for easy cable management & hiding cables behind motherboard tray, to ensure smoothness for build & tinker (upgrade), reduce wiring tangled, as well as better airflow & dust management. Case Specifications Form Factor: Full Tower Motherboard Support: ATX, Micro ATX, Extended ATX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 221mm x 537mm x 565mm (W x H x D) Packaging Dimensions: 280mm x 655mm x 589mm (W x H x D) Body

Material: SECC Front Bezel

Material: Plastic Side Panel: Window External Bays: 3 x 5.25 External 1 x 3.5 External Internal Bays: 5 x 3.5 Internal Drive Bay Notes: Expansion Slots: 8 x Full Size Cooling Front: 200 x 200 x 30 mm fan (600rpm, 13d BA) Cooling Top: 200 x 200 x 30 mm Blue LED fan (600rpm, 13d BA) Cooling Rear: 120 x 120 x 25 mm Turbo fan (1000rpm, 16d BA) Cooling Side: 200 x 200 x 20 mm Blue LED fan (600rpm, 13d BA) Cooling Bottom: 120 x 120 x 25 mm or 140 x 140 x 25 mm IO Ports: 2 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio (Also Supports AC97) 1 x Microphone Front Bezel

Colour: Black/ Blue Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 0 KGs General Specifications Manufacturer Part Number: VP400M1W2N EAN Number: 4717964391063 Has Mains Plug: No

Colour: Black Whats In The Box: Case Product Manual Unit (Product)

Dimensions (mm): 221mm x 537mm x 565mm (W x H x D) Packaging

Dimensions (mm): 280mm x 655mm x 589mm (W x H x D) Net Weight (KGs): 10 KGs Gross Weight (KGs): 12 KGs















...

Commander MS-I Stylish, affordable & feature rich, the Thermaltake Commander Mid Tower is a great value to build your dream ...

Commander MS-I USB (Universal Serial Bus) 3.0 The Midi-ATX case Thermaltake Commander MS-I USB (Universal Serial Bus) 3.0 offers a USB (Universal Serial Bus) 3.0 & audio ports. At the back rotates a blue illuminated 120mm LED fans. The case offers three drive bays for optical drives & an externally accessible 3.5 "bay for installation eg a card reader Internally, five 3.5." -. Well as a 2.5 "hard drives are installed, both the locking of the optical drives & the hard drives take place by means of quick-release fasteners., the Commander MS-I USB (Universal Serial Bus) 3.0 is completely black & has a cable management system to optimize the air flow inside. Key Features Unique Design - Ready for long graphic card up to 12.5 Ready for long graphic card up to 12.5 Ventilation - CPU Air Cooling System 120mm x 1 (Optional) 1. Top (exhaust): 120 x 120 x 25 mm fan, 120mm x 1 4. Rear (exhaust): 120 x 120 x 25 mm Blue LED Fan HDD Air Cooling System 120mm x 1 (Optional) 2. Front (intake): 120 x 120 x 25 mm fan VGA Air Cooling System 120mm x 1 (Optional) 3. Bottom (intake): 120 x 120 x 25 mm fan Colour - Full black coating with metal mesh appearance e SPORTS - e SPORTS look front bezel Bottom Mounted PSU - Bottom-placed PSU design for easy installation Silent Fan - Rear 120mm silent fan with blue LED Latest USB (Universal Serial Bus) 3.0 - Built-in latest USB3.0 Super Speed connector Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: No Dimensions: 202mm x 484mm x 426mm (W x H x D) Packaging Dimensions: 250mm x 548mm x 466mm (W x H x D) Body

Material: SECC Front Bezel

Material: Plastic Side Panel: Window External Bays: 3 x 5.25 External 1 x 3.5 External Internal Bays: 5 x 3.5 Internal 1 x 2.5 Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: 120 x 120 x 25 mm (optional) Cooling Top: 120 x 120 x 25 mm (optional) Cooling Rear: 120 x 120 x 25 mm Blue LED fan, 1000rpm, 16d BA Cooling Side: None Cooling Bottom: 120 x 120 x 25 mm (optional) IO Ports: 1 x USB (Universal Serial Bus) 3.0 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio (Also Supports AC97) 1 x Microphone Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 4.5 KGs General Specifications Manufacturer Part Number: VN400A1W2N EAN Number: 4716872052271 Has Mains Plug: No

Colour: Black Whats In The Box: Case Product Manual Unit (Product)

Dimensions (mm): 202mm x 484mm x 426mm (W x H x D) Packaging

Dimensions (mm): 250mm x 548mm x 466mm (W x H x D) Net Weight (KGs): 4.5 KGs Gross Weight (KGs): 6 KGs















...

Features
- e SPORTS extreme design now in white
- Bottom-placed PSU design for easy installation
- Supports high-end graphic


...

Commander MS-II Stylish, affordable & feature-rich, the Thermaltake Commander MS-II Mid Tower is a great choice for building your dream house. The black-coated interior & exterior, complete with meshed front panel, add overall quality & high-end style. A rear outtake fan, & support for five optional fans, quickly & efficiently dissipates the heat generated by internal components. An excellent range of features, including front USB (Universal Serial Bus) 3.0 access, up to 320mm long graphic card support, tool-less mount for 5.25" & 3.5" drives, & abottom-placed PSU with filter, makes this chassis an excellent choice for your power house. Key Features Unique Design - Ready for long graphic card up to 12.5, Internal USB (Universal Serial Bus) 3.0 Connection The Cooling System - HDD Air Cooling System 1. Front (intake): 120 x 120 x 25 mm fan (Optional) CPU Air Cooling System 2. Top (exhaust): 120 x 120 x 25 mm fan x 2 (Optional) 3. Rear (exhaust): 120 x 120 x 25 mm Blue LED Fan (1000rpm, 16d BA) VGA Air Cooling System 4. Side (intake): 120 x 120 x 25 mm fan (Optional) 5. Bottom (intake): 120 x 120 x 25 mm fan (Optional) Colour - Full black coating with metal mesh appearance e SPORTS - e SPORTS look front bezel Bottom Mounted PSU - Bottom-placed PSU design for easy installation Silent Fan - Rear 120mm silent fan with blue LED Latest USB (Universal Serial Bus) 3.0 - Built-in latest USB3.0 Super Speed connector Case Specifications Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: No Dimensions: 195mm x 423mm x 481mm (W x H x D) Packaging Dimensions: 234mm x 479mm x 542mm (W x H x D) Body

Material: SECC Front Bezel

Material: Plastic Side Panel: Window External Bays: 3 x 5.25 External 1 x 3.5 External Internal Bays: 5 x 3.5 Internal 1 x 2.5 Internal Drive Bay Notes: Expansion Slots: 7 x Full Size Cooling Front: Optional 120 x 120 x 25 mm fan x 1 Cooling Top: Optional 120 x 120 x 25 mm fan x 2 Cooling Rear: 120 x 120 x 25 mm Blue LED fan (1000rpm, 16d BA) Cooling Side: Optional 120 x 120 x 25 mm fan Cooling Bottom: Optional 120 x 120 x 25 mm fan IO Ports: 1 x USB (Universal Serial Bus) 3.0 1 x USB (Universal Serial Bus) 2.0 1 x HD Audio (Also Supports AC97) Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 4.5 KGs General Specifications Manufacturer Part Number: VN900A1W2N EAN Number: 4716872055104 Has Mains Plug: No

Colour: Black Whats In The Box: Case Product Manual Unit (Product)

Dimensions (mm): 195mm x 423mm x 481mm (W x H x D) Packaging

Dimensions (mm): 234mm x 479mm x 542mm (W x H x D) Net Weight (KGs): 4.5 KGs Gross Weight (KGs): 6 KGs















...

Thermaltake Contac 16 Intel/AMD CPU Cooler 92mm PWM Fan 100W Contac 16 Heat-pipe Direct Touch Technology With Excellent Performance, supports 100W, Two 6mm Heat-pipes provide good contact with CPU & enhance heat transfer, Premium thermal grease provides higher thermal conductivity between CPU & cooler. Pre-installed One 92mm High Performance Fan, Fan speed with 2400 RPM provides high airflow, Enclosed two clips for 2nd fan installation to increase cooling performance. Highly Compatibility For Most Sockets, support Intel socket LGA 1155/1156/775, AMD socket FM1/AM3+/AM3/AM2+/AM2 (supports processor under 100W) Key Features Two 6mm Heat-pipes
- Provide good contact with CPU & enhance heat transfer Premium thermal grease
- Provides higher thermal conductivity between CPU & cooler Fan speed
- 2400 RPM provides high airflow Enclosed two clips
- 2nd fan installation to increase cooling performance Pre-installed
- One 92mm High Performance Fan Specifications

Material: Aluminum Fins, Aluminum Base Heatpipe: 6mm x 2 Rated Voltage: 12 V Start Voltage: 6 V Rated Current: 0.24A Power Input: 2.88W Fan Speed: 2400RPM Max Air Flow: 45.1 CFM Max. Air Pressure: 2.6 mm H2O Noise: 30 d BA Life Expectation: 30, 000 Hours Connector: 3 Pin Weight: 372 g






...

Heat-pipe Direct Touch Technology with Excellent Performance, supports 140W Four & Ocirc;6mm Heat-pipes provide good contact with CPU & enhance heat transfer. Premium thermal grease provides higher thermal conductivity between CPU & cooler. Pre-installed one 92mm high performance fan PWM function with fan speed from 1000~2400RPM. Enclosed two clips for 2nd fan installation to increase cooling performance. Universal Socket Compatibility Support: Intel socket LGA 1366/1155/1156/775 AMD socket FM1/AM3+/AM3/AM2+/AM2

Specification Compatibility Intel Socket LGA 1155/1156 Core i 7 Core i 5 Core i 3 LGA 775 Core 2 Extreme Core 2 Quad Core 2 Duo Pentium D Pentium 4 Pentium Celeron D Celeron AMD Socket FM1 A series AM3+/AM3 Phenom II series Athlon II series Athlon series Sempron series AM2 / AM2+ Phenom II series Phenom series Athlon series Sempron series Heatsink

Dimensions 100 (L) x 88.4 (W) x 139.5 (H) mm Heatsink Material Aluminum Fins Aluminum Base Heatpipe 6mm x 4 Fan

Dimensions 92 (L) x 92 (W) x 25 (H) mm Rated Voltage 12 V Started Voltage 6 V Rated Current 0.24A Power Input 2.88W Fan Speed 1000 ~ 2400 RPM (PWM) Air Flow 17.2 ~ 45.4 CFM Air Pressure 0.5 ~ 2.6 mm H2O Noise 19.3 ~ 30 d BA Life Expectation 30, 000 Hours Connector 4 Pin Weight 425 g





...

Thermaltake Mini Chassis
- Core V1 The new Core V1 represented by Thermaltake is a small & cute ITX based chassis with a 200mm
...

As the latest addition to the Core V Series, the new Thermaltake Core V21 is a quadrate micro M-ATX-based chassis that offers an endless stackable & flexible thermal solution. It allows externally-modular upgrades for enthusiasts to create dual systems. Designed for use in either a vertical or horizontal orientation on the motherboard, users can customize the chassis for the best viewing presentation. A 200mm fan on the front panel ensures that the Core V21 delivers outstanding cooling performance with compatibility for extensive DIY/AIO LCS, further enhancing the reputation that the air cooling units of the series has become renowned for. Guaranteed to be an immensely powerful system, the Core V21 also has the ability to accommodate various overclocking components to boost performance even further where it counts! Vertical or Horizontal Motherboard Placement - The Core V21 is designed for use in either a vertical or horizontal orientation on the motherboard. Built for customization that reflects the enthusiast’s personality, it allows for adjustments to the chassis for the best viewing presentation while ensuring outstanding cooling performance. A removable PSU dust filter is embedded in the bottom panel of the chassis. in addition, shockproof rubber gaskets on the PSU bracket help to minimize noise during operation. Stackable & Flexible Thermal Solution - With its endless stackable design, the Core V21 is in a class above the rest. Virtually limitless utility is possible. It’s the first expandable system that allows enthusiasts to incorporate externally -modular upgrades. Stacked together, the chassis opens up space to expand the liquid cooling system, the storage solutions, or even create dual systems, thereby allowing for a dedicated top/bottom set-up for pure cooling. The maximum radiator length supported is 600mm at the front of the stack. Remarkable Expansion - Designed for high-end gaming system compatibility, the Core V21’s modular drive racks allow gamers to easily install up to six data storage devices, a dual expansion slot VGA up to 350mm in length, & a tower CPU cooler up to 185mm in height. Even with a high-wattage PSU of up to 200mm in length, there’s still plenty of space available for cable management. Moreover, two 240mm radiators can be installed on top of the chassis, delivering superior cooling performance. Optimized Ventilation - With its exceptional cooling ability, the Core V21 offers various mounting points to support all types of cooling systems, including DIY/AIO liquid-cooling systems & air-cooling units. A large 200mm fan is preinstalled on the front to guarantee that any type of gaming system can be accommodated. Chambers Concept - The Core V21 is optimized for space management. It is divided into two main chambers: the upper chamber is made for cooling performance & efficiency, while the lower one is made for PSU & drive bays. Thanks to the removable 2.5”/3.5” drive device racks, there is plenty of flexibility to gain the maximum interior space when needed for advanced cooling performance or liquid systems build. Tt LCS Certified - Tt LCS Certified is a Thermaltake exclusive certification applied to only products that pass the design & hardcore enthusiasts standards that a true LCS chassis should be held to. The Tt LCS certification was created so that we at Thermaltake can designate to all power users which chassis have been tested to be best compatible with extreme liquid cooling configurations to ensure you get the best performance from the best features & fitment. Form Factor: Micro ATX Motherboard Support: Micro ATX, Mini ITX PSU Support: Standard ATX Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 320mm x 336mm x 424mm (W x H x D) Packaging Dimensions: 392mm x 486mm x 392mm (W x H x D) Body

Material: SPCC Front Bezel

Material: SPCC Side Panel: Transparent Window External Bays: 3 x 3.5” External Internal Bays: 3 x 3.5” Internal 3 x 2.5” Internal Drive Bay Notes: -Hidden: 3 x 3.5’’ or 2.5”, 3 x 2.5’’ Expansion Slots: 5 x Full Size Cooling Front: 20cm fan (800rpm, 13d BA) Cooling Top: IO Ports: 2 x USB (Universal Serial Bus) 3.0 1 x HD Audio Front Bezel

Colour: Black Body

Colour: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 6.5 KGs General Specifications Manufacturer Part Number: CA-1D5-00S1WN-00 EAN Number: 4717964400192 Has Mains Plug: No

Colour: Black What's In The Box: Case Removable Filters Unit (Product)

Dimensions (mm): 320mm x 336mm x 424mm (W x H x D) Packaging

Dimensions (mm): 392mm x 486mm x 392mm (W x H x D) Net Weight (KGs): 6.5 KGs Gross Weight (KGs): 7.8 KGs















...

The new Thermaltake Core V31 mid-tower chassis, a new addition to the Core Series, which has now arrived following the launch of Core V71, Core V1, & Core V51, while retaining the curved metal mesh appearance, it delivers an outstanding cooling performance with the compatibility for the extensive DIY/AIO LCS, & the air cooling units that the series has become renowned for. Core V31 is an enthusiasts grade mid-tower chassis creating unprecedented space for high-end hardware & liquid cooling expansion, supporting the latest ATX, Micro ATX, Mini-ITX motherboards, & all high-end GPU cards. Form Factor: Midi Tower Motherboard Support: ATX, Micro ATX, Mini ITX PSU Support: Gaming Case: Yes Water Cooling Ready: Yes Dimensions: 208mm x 470mm x 506mm (W x H x D) Packaging Dimensions: 266mm x 519mm x 568mm (W x H x D) Body

Material: SPCC Front Bezel

Material: SPCC Side Panel: Transparent Window External Bays: 2 x 5.25” External 1 x 3.5” External Internal Bays: 3 x 3.5” Internal 3 x 2.5” Internal Drive Bay Notes: -Hidden: 3 x 3.5" or 3 x 2.5" 2 x 2.5" (2 behind the M/B tray) Expansion Slots: 8 x Full Size Cooling Front: 1 x 120mm or 2 x 120mm 1 x 140mm or 2 x 140mm or 3 x 140mm 1 x 140mm or 2 x 140mm Cooling Top: 1 x 120mm or 2 x 120mm or 3 x 120mm Cooling Rear: 1 x 120mm Cooling Side: None Cooling Bottom: 1 x 120mm or 2 x 120mm IO Ports: 2 x USB (Universal Serial Bus) 3.0 1 x HD Audio Front Bezel

Colour: Exterior & Interior: Black Body

Colour: Exterior & Interior: Black System Cabinet

Features: PSU Included: No Net Weight (KGs): 6.58 KGs General Specifications Manufacturer Part Number: CA-1C8-00M1WN-00 EAN Number: 4717964398550 Has Mains Plug: No

Colour: Black What's In The Box: 1x CA-1C8-00M1WN-00 Thermaltake Core V31 chassis Unit (Product)

Dimensions (mm): 208mm x 470mm x 506mm (W x H x D) Packaging

Dimensions (mm): 266mm x 519mm x 568mm (W x H x D) Net Weight (KGs): 6.58 KGs Gross Weight (KGs): 7.86 KGs















...