The UNIDOCKU33 USB (Universal Serial Bus) 3.0 Universal HDD / SSD Dock enables you to instantly access your 2.5 or 3.5in IDE & SATA hard drives through two top loading drive slots, saving you the hassle of mounting the drives into a computer or external enclosure or tray. Enhanced with UASP (USB Attached SCSI Protocol), this hard drive docking station lets you get the most out of the fastest drive technologies such as SATA III (6 Gbps), solid state drives (SSD) & hybrid, drives with performance up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. See our UASP testing results below for further details. The slot-loading design holds the SATA & IDE drives upright inside the docks, neatly keeping them off the desk, for convenience & a clutter-free setup. For SATA drives, the HDD can be inserted & connected directly through the designated dock slot, while the IDE drive slot is conveniently positioned near the rear panel 40-pin data & LP4 power connections, making it easy to connect to the dock using the included IDE data & power cables. A single USB (Universal Serial Bus) 3.0 connection to your host computer, enables access to both the IDE & SATA hard drives simultaneously
- a convenient solution for migrating data from an IDE drive to a SATA drive or vice versa. The dock can also be used to greatly increase the storage & backup capabilities of your computer system with support for high capacity drives (tested with up to 6TB 3.5" & 2TB 2.5" drives). The UNIDOCKU33 is backed by a Star Tech.com 2-year warranty & free lifetime technical support. enhanced Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing, UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel Ivy Bridge system, a UASP-enabled Star Tech.com Enclosure, & a SATA III solid state drive. Features Maximum versatility with support for SATA & IDE as well as 2.5in & 3.5in HDDs & SSDs Optimal performance with support for SATA III & UASP Hassle-free operation with upright slot-loading SATA & IDE drive bays Compatible with USB (Universal Serial Bus) 3.0 / 2.0 / 1.1 (5 Gbps / 480 Mbps / 1.5 Mbps) Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives Compatible with PATA (IDE) 66/100/133 MBps hard drives Supports 2.5" or 3.5" form factor hard drives (HDD) or solid state drives (SSD) Compact, desktop-style form factor Plug-&-Play & hot-swap compatible Patented drive ejection mechanism for SATA drives Combined power switch & status LED for each drive
Specification Warranty 2 Years Hardware Chipset ID JMicron
- JMS561U, JMD330 Compatible Drive Types (Type & Rate) SATA & IDE Drive Installation Removable Drive Size 2.5in & 3.5in Fan (s) No Interface USB 3.0 Number of Drives 2 Performance Insertion Rating 15, 000 Cycles (SATA) Max Drive Capacity Currently tested with up to 6TB 7200 RPM 3.5" hard drives & 2TB 5400 RPM 2.5" hard drive Maximum Data Transfer Rate 5 Gbps MTBF 30000 hours RAID No Type & Rate USB 3.0
- 5 Gbit/s SATA III (6 Gbps) UASP Support Yes Connector (s) Drive Connectors 1
- IDE (40 Pin; EIDE/PATA) Male 1
- LP4 (4 pin; Molex Large Drive Power) Male 1
- SATA Data & Power Combo (7+15 pin) Receptacle Host Connectors 1
- USB (Universal Serial Bus) 3.0 B (9 pin; Super Speed) Female Physical Characteristics Color Black Enclosure Type Plastic Product Height 70 mm [2.8 in] Product Length 147 mm [5.8 in] Product Weight 512 g [18.1 oz] Product Width 130 mm [5.1 in] Indicators LED Indicators 2
- Power & Drive Activity Power Center Tip Polarity Positive Input Current 1.3 A Input Voltage 110 ~ 240 AC Output Current 3 A Output Voltage 12 DC Plug Type M Power Source AC Adapter Included