The VS123HD 3-port HDMI Auto Switch features three prioritized HDMI input ports. If the active HDMI source is turned off, disconnected, or otherwise lost, the switch automatically selects the next available HDMI signal as the priority output, ensuring the display is always receiving a signal. The automatic switch

Includes:: an IR Remote Control, so you’ll be able to share an HD projector or display between three HDMI audio/video sources, with the option to manually control the switch from a distance or through the easy-to-use front panel toggle button. Ideal for High-Definition applications, this 3-in/1-out HDMI switch supports true High-Definition 1080p resolutions (WUXGA/1920x 1200 from PC/computer) as well as 7.1 Surround Sound audio, ensuring the best possible multimedia experience from connected devices. Features Transparent, automatic HDMI switching IR remote control Built-in HDMI display cable saves you from purchasing an additional cable Supports HDTV resolutions up to 1080p Supports PC resolutions up to 1920x 1200 Easy installation & set up in minutes Allows for cables up to 30ft (10m) in length Supports High Speed HDMI device switching HDCP Compliant Supports 3D Video

Specification Warranty 2 Years Hardware Audio Yes Industry Standards High Speed HDMI, HDCP Output Signal HDMI Ports 3 Performance Max Distance 10 m / 33 ft Maximum Digital Resolutions 1920x 1200 Wide Screen Supported Yes Connector (s) Connector A 1
- HDMI (19 pin) Male Connector B 3
- HDMI (19 pin) Female Special Notes / Requirements Note Port 1 is set to have higher priority than port 2 or port 3 when all signals are on. Port 2 is set to have higher priority than port 3 when both signals are on, but Port 1 is off. Physical Characteristics Color Black Enclosure Type Plastic Product Height 25 mm [1 in] Product Length 81 mm [3.2 in] Product Weight 99.5 g [3.5 oz] Product Width 55 mm [2.2 in] Indicators LED Indicators 3
- Two Green for Display Status, & one red for power. Environmental Humidity 10% to 85%RH Operating Temperature 0°C to 70°C (32°F to 158°F) Storage Temperature -65°C to 150°C (-85°F to 302°F)






...

Add 2 external & 1 internal Fire Wire 400 port to any computer with a low profile PCI slot Add both 6-pin & 4-pin Fire Wire ports from a single card with data transfer speeds up to 400 Mbps Backed by a Star Tech.com lifetime warranty & free lifetime technical support This 3 Port PCI Low-Profile/ Half-Height 1394a Fire Wire Adapter Card turns a motherboard PCI slot into two external IEEE 1394a Fire Wire slots (1x 6-pin, 1x 4-pin), & provides an internal (6-pin) Fire Wire port that can be used in place of the external 6-pin connector
- a cost-effective solution that lets you connect any Fire Wire 400 device to your desktop computer. Compatible with either Mac or PC computers, the 1394a Fire Wire card can be installed in small/micro form factor computer cases, &

Includes:: both standard & low profile/half-height brackets for easy installation. A practical solution for connecting iPods, MP3 players, portable drives, digital camcorders & more to your desktop computer, the Fire Wire 400 adapter card supports hot-swappable connectivity, allowing you to plug, unplug, & swap your Fire Wire peripherals with ease. A versatile Fire Wire video editing solution, the adapter card can be installed in a PCI 5V or PCI-x 3.3V slot. WhatÂ’s in the box 2 Port Low Profile Firewire Card 4-pin to 6-pin Firewire Cable > Full Profile Bracket Instruction Manual


...

The ST3300GU3B Portable USB (Universal Serial Bus) 3.0 Hub features an integrated Gb E port, enabling you to expand your laptop connectivity by adding three external USB (Universal Serial Bus) 3.0 ports, as well as a Gigabit network port via a single USB (Universal Serial Bus) 3.0 connection. The hub merges Gigabit network support & USB (Universal Serial Bus) 3.0 hub access into lightweight yet sturdy aluminum casing, providing vital connectivity ports that are often limited or nonexistent on modern mobile computers, while remaining compact & travel-friendly. Plus, with an attached USB (Universal Serial Bus) 3.0 host connection cable there’s no need to carry a separate cable with you, so you can tuck the hub neatly into your laptop bag for maximum portability. For faster & more consistent network connections, the integrated Ethernet port leverages the 5 Gbps capabilities of the USB (Universal Serial Bus) 3.0 interface to provide wired Gigabit access that is fully compatible with IEEE 802.3/u/ab standards. An ideal laptop accessory, this mobile USB (Universal Serial Bus) hub is great for connecting low-power peripherals like a mouse, keyboard or USB (Universal Serial Bus) flash drive, & also

Includes:: a universal power adapter for connecting devices such as external hard drive enclosures Backed by a Star Tech.com 2-year warranty & free lifetime technical support. The Star Tech.com Advantage Only requires a single USB (Universal Serial Bus) 3.0 port to connect up to three additional USB (Universal Serial Bus) 3.0 devices, plus a Gigabit network Take the adapter anywhere with a compact, portable, & travel-friendly design Sleek & lightweight, with black aluminum casing & attached USB (Universal Serial Bus) 3.0 cable

...

The ST4300U3C1B 3-Port USB (Universal Serial Bus) 3.0 Hub lets you add three USB (Universal Serial Bus) 3.0 ports to your desktop or laptop, as well as a combination USB (Universal Serial Bus) fast-charge or data port, simultaneously providing you with both PC host connectivity & separate mobile device charging capability. The USB (Universal Serial Bus) 3.0 ports support data transfer rates up to 5 Gbps, & are backward compatible with USB (Universal Serial Bus) 2.0 & 1.x specifications. For faster charging of your smartphone or tablet, including the Samsung Galaxy Note 10.1, Galaxy S 5, Nexus 7, Nexus 5, Apple iPhone, & more, the combination data/fast-charge port is compliant with USB (Universal Serial Bus) Battery Charging

Specification 1.2 & offers 2.1A of charging power. When connected to a computer you can easily switch the hub combo port from fast-charge to standard data sync mode, using the integrated toggle button. This space-saving USB (Universal Serial Bus) 3.0 hub provides ergonomically-friendly access to your smartphone or tablet via an embedded flip-up st&, for convenient operation & charging. The Star Tech.com Advantage:
- Fast-charge your mobile device while simultaneously connecting up to three USB (Universal Serial Bus) 3.0 devices.
- Use your smartphone or tablet in an ergonomically friendly & upright position with a flip-up device stand
- Save time & hassle & quickly toggle between fast-charge & sync modes using a simple button




...

The ST4300U3C1 3-Port USB (Universal Serial Bus) 3.0 Hub lets you add three USB (Universal Serial Bus) 3.0 ports to your desktop or laptop, as well as a combination USB (Universal Serial Bus) fast-charge or data port, simultaneously providing you with both PC host connectivity & separate mobile device charging capability. The USB (Universal Serial Bus) 3.0 ports support data transfer rates up to 5 Gbps, & are backward compatible with USB (Universal Serial Bus) 2.0 & 1.x specifications. For faster charging of your smartphone or tablet, including the Samsung Galaxy Note 10.1, Galaxy S 5, Nexus 7, Nexus 5, Apple iPhone, & more, the combination data/fast-charge port is compliant with USB (Universal Serial Bus) Battery Charging

Specification 1.2 & offers 2.1A of charging power. When connected to a computer you can easily switch the hub combo port from fast-charge to standard data sync mode, using the integrated toggle button. This space-saving USB (Universal Serial Bus) 3.0 hub provides ergonomically-friendly access to your smartphone or tablet via an embedded flip-up st&, for convenient operation & charging. The Star Tech.com Advantage
- Fast-charge your mobile device while simultaneously connecting up to three USB (Universal Serial Bus) 3.0 devices
- Use your smartphone or tablet in an ergonomically friendly & upright position with a flip-up device stand
- Save time & hassle & quickly toggle between fast-charge & sync modes using a simple button




...

The S3510BMU33 Black USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 3.5in SATA III hard drive (HDD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well. Enhanced with UASP (USB Attached SCSI Protocol), this 3.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details. With support for SATA I/II/III, & large capacity drives (tested up to 4TB) this HDD enclosure is compatible with virtually any 3.5in SATA hard drive, & can greatly increase the storage/backup capabilities of your computer. The USB (Universal Serial Bus) 3.0/SATA III enclosure features high quality aluminum construction, ensuring durability. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. enhanced Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. ...

The GCAUD3535FF Audio Cable Adapter/ Audio Coupler features two 3.5mm audio female connectors, providing a cost-effective way to combine two standard 3.5mm stereo headphone cables or convert a standard audio cable into an extension cable. ...

Turn 4 SATA hard drives into external RAID storage that connects over USB/ Fire Wire/e SATA Support for up to 4 drives provide large amounts of storage with a choice of high speed interfaces from USB (Universal Serial Bus) 2.0, Fire Wire 400/800 or e SATA The removable front cover & accessible drive bays allows drives to be replaced easily in case of failure or upgraded Built-in support for numerous RAID modes for most personal/business needs & an 80mm controllable cooling fan to keep drives from overheating Star Tech.com''s S354UFER External SATA RAID Enclosure is a high-performance external RAID storage solution, supporting up to 4 high capacity (tested with up to 4TB per bay) 3.5" SATA hard drives (supports SATA, SATA II & SATA III-6 Gbps). The 4-bay RAID enclosure can be connected to the host/source computer through USB (Universal Serial Bus), e SATA or Fire Wire & automatically builds your SATA RAID array based on your selection (Spanning, RAID 0, RAID 1, RAID 1+0, RAID 3, & RAID 5 supported), delivering a simple, yet flexible external storage solution. Designed for convenience, the enclosure features front panel LED indicators that provide RAID information & simple hard drive status & activity monitoring. The enclosure also features a built-in 3-speed 80mm fan with automatic or manual controls that allow you to customize the speed of the fan as necessary, ensuring suitable operating temperatures for optimized drive performance. WhatÂ’s in the box Four drive HDD enclosure e SATA Cable USB (Universal Serial Bus) Cable 6 pin Fire Wire cable 9 pin Fire Wire cable Screw driver & screw kit Power Cord (NA/ UK/ EU) Universal Power Adapter Instruction Manual ...

Turn an Internal 3.5" SATA or IDE Hard Drive into an External USB/e SATA Hard Drive Convert either an IDE (PATA) or SATA hard drive into an external storage solution with USB (Universal Serial Bus) 2.0 or e SATA connectivity A screwless design allows for quick & easy installation or removal of hard drives from the enclosure without the use of any tools Backed by a Star Tech.com 2-year warranty & free lifetime technical support This Info Safe 3.5in IDE/SATA external hard drive enclosure connects to a host computer through either USB (Universal Serial Bus) 2.0 (SATA or IDE) or e SATA (SATA only), delivering versatility & cost-effectiveness. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer''s storage/backup capabilities. This black aluminum drive enclosure features a screwless snap-in design for hard drive installation that saves your valuable time, & supports any standard 3.5in SATA or IDE hard drive
- allowing you to customize your external storage solution based on your preference of hard drive model & manufacturer. The External hard drive enclosure features a large built-in 80mm fan that provides enhanced re-distribution of heat build-up generated as a result of typical drive operation. This feature is especially important for larger capacity hard drives, & faster “spinning" drives (i.e 7200 RPM), as it can help keep drives running cooler, which can preserve data integrity & the drive''s lifespan by reducing the chances of premature failures. Designed to provide a convenient & efficient operating experience, the enclosure features " One Touch Backup", which automates backup tasks, allowing you to backup files & folders at the touch of a button, based on pre-defined settings within the easy to use software utility (included). What’s in the box Enclosure Enclosure Stand e SATA Cable LP4 Cable SATA Power Cable USB (Universal Serial Bus) Cable Power Adapter Driver CD Instruction Manual
...

Info Safe 3.5" e SATA/USB 2.0 Removable SATA HD Enclosure Quickly & easily install or remove hard drives from the enclosure with the innovative trayless design Efficiently access a high capacity SATA drive over e SATA or USB (Universal Serial Bus) 2.0 connectivity Backed by a Star Tech.com 2-year warranty & free lifetime technical support This e SATA/USB Removable SATA HD Enclosure features a convenient trayless design that eliminates having to mount the hard drive in the enclosure, making it easier to access data on the fly. Simply insert any 3.5in SATA (SATA, SATA II, SATA III) hard drive into the enclosure, close the panel door & connect the enclosure to the computer through either e SATA (external SATA) or USB (Universal Serial Bus). To remove the hard drive from the enclosure, simply open the panel door & pull the SATA hard drive out. Because the SAT3510BUEGB drive enclosure can be connected to a host computer through either e SATA or USB (Universal Serial Bus), you can rely on efficient data transfer speeds (up to 1.5 Gbps for e SATA, 480 Mbps for USB (Universal Serial Bus) 2.0) & quick connectivity. The enclosure is constructed to provide a durable housing for inserted drives to prevent physical damage to the drives while in transit, & features lockable front door access for added data security. Large capacity drives (tested with up to 4TB) can be used to greatly enhance your computer''s storage/backup capabilities. To ensure a cool operating environment, the SATA HDD enclosure provides a built-in 40mm fan that re-distributes the heat build-up generated as a result of typical hard drive operation
- which is especially important for large volume storage & faster spinning drives (i.e. 7200 RPM), as it can help keep drives running cooler, which can preserve data integrity & the drive''s lifespan by reducing the chances of premature failures. WhatÂ’s in the box Enclosure e SATA Cable USB (Universal Serial Bus) 2.0 Cable Screw Pack Power Adapter Manual
...