Turn a 2.5” SATA Hard Drive or Solid State Drive into a UASP supported USB (Universal Serial Bus) 3.0 External Hard Drive Compatible with SATA revision I/II/III (1.5/3.0/6.0 Gbps) drives Light weight & durable aluminum enclosure Powered directly from the USB (Universal Serial Bus) port Super Speed USB (Universal Serial Bus) 3.0 compliant host interface supporting data transfer rates up to 5 Gbps High Speed USB (Universal Serial Bus) 2.0 compliant host interface, with transfer rates up to 480 Mbps Power/ Activity LED indicator Plug-&-Play & Hot-Swap compatible The S2510BMU33 USB (Universal Serial Bus) 3.0 Hard Drive Enclosure with UASP lets you connect a 2.5in SATA III hard drive (HDD) or solid state drive (SSD) through an available USB (Universal Serial Bus) port. The enclosure delivers optimal performance with a USB (Universal Serial Bus) 3.0 connection, but is backward compatible with USB (Universal Serial Bus) 2.0/1.1 host connections as well. Enhanced with UASP (USB Attached SCSI Protocol), this 2.5" SATA III enclosure performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP-enabled host controller. Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP reduces latency, significantly increasing transfer speeds & reducing processor usage to utilize the full potential of your SATA III hard drives. See our UASP testing results below for further details. With support for SATA I/II/III, & large capacity drives (tested up to 1TB) this HDD enclosure is compatible with virtually any 2.5in SATA hard drive, & greatly increase the storage/backup capabilities of your computer. The USB (Universal Serial Bus) 3.0/SATA III enclosure requires no external power adapter & features high quality aluminum construction, ensuring both portability & durability when carried as a laptop accessory. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. enhanced Performance with UASP UASP is supported in Windows 8, Mac OSX (10.8 or above), & Linux. In testing UASP performs with a 70% faster read speed & 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. At the same peak in testing UASP also shows an 80% reduction in required processor resources. Testing results were obtained using an Intel® Ivy Bridge system, a UASP enabled Star Tech.com enclosure, & a SATA III solid state drive. What’s in the box 2.5” USB (Universal Serial Bus) 3.0 SATA III HDD Enclosure Screw Kit 18" USB (Universal Serial Bus) 3.0 Cable Product Manual ...

Connect your SATA drive to an IDE motherboard Connect a SATA drive to an IDE system without having to install any special drivers or software Backed by a Star Tech.com lifetime warranty & free lifetime technical support This IDE/ATAPI to SATA adapter lets you connect a SATA drive to a motherboard IDE/ATA 33/66/100/133 port. The IDE/SATA adapter offers a cost-effective solution for bridging the gap between a newer SATA drive & older motherboard designs, allowing you to connected newer SATA drives to a older IDE motherboard port & in turn eliminating the need to upgrade the motherboard for the sake of compatibility with the drives. Saving time & hassle, the IDE to SATA adapter can be connected through simple plug & play installation & is backed by Star Tech.com''s Lifetime Warranty & free lifetime technical support. WhatÂ’s in the box IDE to SATA adapte LP4 Molex to SP4 Power Cable Instruction Manual ...

Turn a 2.5in SATA hard drive into a USB2.0 or e SATA external hard drive Choose between e SATA or USB (Universal Serial Bus) 2.0 connectivity depending on host system configuration/capabilities A compact, aluminum chassis makes for a light-weight & easily portable storage solution with optimal heat dissipation characteristics that's powered over USB Backed by a Star Tech.com 2-year warranty & free lifetime technical support This e SATA/USB External Hard Drive Enclosure transforms virtually any 2.5" SATA (SATA, SATA II, SATA III) hard drive or solid state drive (SSD) into a cost-effective portable storage solution. Ideal for storing digital multimedia & other demanding applications, the 2.5" SATA hard drive enclosure connects to a host computer using USB (Universal Serial Bus) 2.0 or e SATA with support for data transfer rates of up to 3 Gbps (using e SATA) or 480 Mbps (through USB (Universal Serial Bus) 2.0). Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer''s storage/backup capabilities. A truly portable solution, the compact hard drive enclosure features lightweight yet durable aluminum construction, as well as a small form factor design that fits perfectly into your pocket or notebook bag when not in use. To eliminate the hassle of having to find a power outlet when you are ready to back up data or load your stored files, the USB/e SATA enclosure offers USB (Universal Serial Bus)-powered operation, requiring no external power supply. What’s in the box 2.5” SATA Enclosure USB (Universal Serial Bus) Cable USB (Universal Serial Bus) to DC Cable e SATA Cable Screws Screw Driver Travel Pouch Instruction Manual ...

Turn a 2.5in SATA drive into an external storage device with USB (Universal Serial Bus) 2.0 connectivity A compact, aluminum chassis construction makes for a light-weight & easily portable storage solution with optimal heat dissipation characteristics USB (Universal Serial Bus) 2.0 transfer rates up to 480 Mbps & ability to draw power from up to two USB (Universal Serial Bus) ports, means fast access without reliance on an external power source Backed by a Star Tech.com 2-year warranty & free lifetime technical support This external hard drive enclosure transforms a 2.5in SATA (SATA, SATA II, SATA III) hard drive or SSD into the perfect portable storage solution. Ideal for storing digital multimedia & other demanding applications, the enclosure lets you get the most out of your hard drive, connecting to a host computer using USB (Universal Serial Bus) 2.0 (also backward compatible with USB (Universal Serial Bus) 1.1), for maximum data transfer rates of 480 Mbps. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer''s storage/backup capabilities. Plus, the external hard drive enclosure

Includes:: a USB (Universal Serial Bus) Y-cable, that when both USB (Universal Serial Bus) male connectors are connected to the host computer eliminates the need for an external power adapter. WhatÂ’s in the box 2.5" SATA Enclosure USB (Universal Serial Bus) 2.0 Y-Cable Screw Kit Mini Screwdriver Protective Case

...

Turn a 2.5” SATA Hard Drive or Solid State Drive into an encrypted external hard drive, with touchpad password security Real time 256-bit AES hardware encryption is secure, fast & platform independant, requiring no software or driver installation Access to the encrypted data is allowed through a built-in touchpad, enabling the enclosure to work on virtually any hardware platform that supports USB (Universal Serial Bus) storage Super Speed USB (Universal Serial Bus) 3.0 allows for up to 5 Gbps of data bandwidth for faster data transfers, while remaining backward compatible with USB (Universal Serial Bus) 2.0 systems Turn a 2.5” SATA Hard Drive or Solid State Drive into secured external storage with touchpad password entry
- The S2510BU3PW USB (Universal Serial Bus) 3.0 HDD Enclosure features Touchpad Encryption, enabling you to turn almost any 2.5-inch SATA hard drive (HDD) or solid state drive (SSD) into an AES-encrypted external hard drive. The enclosure supports large capacity hard drives (tested with up to 1TB), maximizing system storage expansion & backup capabilities. Using an Advanced Encryption Standard algorithm (256-bit AES), all of the data on hard drives installed within the enclosure is securely protected from unauthorized users. Encryption is performed completely in-hardware & real-time, ensuring maximum performance while eliminating the need for complicated software installation. Access to the encrypted content is allowed through the built-in touchpad, so any system that supports a USB (Universal Serial Bus) storage device can be used to access the data. The S2510BU3PW encrypted HDD enclosure is backed by a Star Tech.com 2-year warranty & free lifetime technical support. WhatÂ’s in the box 2.5in SATA Enclosure USB (Universal Serial Bus) 3.0 Cable USB (Universal Serial Bus) to DC Adapter Cable Mini Driver & Screw Kit Carrying Pouch Cleaning Cloth Instruction Manual
...

Portable trayless dual 2.5in external storage solution for fast Hard Drive swapping. The S252U2ERR Dual Removable 2.5in SATA Hard Drive Enclosure provides a complete, hardware-based external storage solution for laptop or desktop computers. Accommodating two 2.5in SATA (SATA, SATA II, SATA III) hard drives, this compact HDD enclosure provides a broad range of RAID configurations including JBOD, Spanning (BIG/ Concatenated), RAID 0 (Fast), RAID 1 (Safe) & more
- providing the flexibility needed to create the storage solution that best fits your application. Additionally this trayless enclosure features toolless removable hard drive bays, providing a quick & easy way to replace or upgrade the installed drives for more space or enhanced performance. This versatile dual hard drive enclosure can be connected to a host computer, using either USB (Universal Serial Bus) or e SATA with support for full hi-speed USB (Universal Serial Bus) 2.0 data transfer rates of up to 480 Mbps, & for e SATA transfer rates of up to 3 Gbps
- delivering the speed needed for your external storage to function seamlessly with your desktop or laptop computer. Compatible with SATA hard drives (HDD) & solid state drives (SSD) this enclosure supports the latest advances in maximum hard drive capacity per bay.

...

Mount a 2.5in SATA hard drive to any computer with an available 3.5in bay A metal mounting bracket ensures the drive is reliably secure & provides heat dissipation from the drive Backed by a Star Tech.com 2-year warranty & free lifetime technical support This Serial ATA hard drive mounting kit means that you can install a 2.5in SATA hard drive in a 3.5in drive bay. The 2.5in to 3.5in SATA hard drive mounting kit features a sturdy aluminum bracket, as well as a combined 7+15 pin SATA + LP4 Power to SATA cable
- which helps simplify installation & reduce clutter within the computer case. WhatÂ’s in the box 3.5" Mounting Bracket Data/ Power Adapter Cable Screw Kit
...

Use an available expansion card slot to install a hot swappable 2.5in hard drive Utilize a free expansion card slot to add a removable 2.5" SATA hard drive bay Vented aluminum/steel design & a 50, 000+ insertion rating ensures reliability of the drive & drive rack Maximize performance, with file transfer speeds up to 6 Gbps when paired with SATA III HDD & controller Use an available expansion card slot to install a hot swappable 2.5in hard drive
- The S25SLOTR Trayless Hard Drive Rack can be installed into an available (full profile) PCI expansion card slot, providing easy access to a bare 2.5" SATA hard drive or solid state drive (SSD) from the rear panel of a computer case. Unlike conventional hard drive enclosures, the S25SLOTR hard drive rack doesn't require that a drive be installed in a drive tray, saving the time & hassle involved in having to mount or install the hard drive for access to drive contents. To maximize performance & utilize the full speed potential of your SATA III hard drives, this HDD Backplane supports SATA III for transfer speeds up to 6 Gbps when paired with compatible controller. Once installed in a PCI slot (and accompanying rear panel bracket), installing a 2.5" SATA HDD is as simple as inserting it into the trayless rack. To remove the hard drive, simply hit the eject button to unlock the access door, allowing the drive to be pulled out of the computer without having to dismount the drive. * This unique design of the mobile rack enables you to use any available full profile expansion slot to mount a removable 2.5in SATA hard drive. WhatÂ’s in the box Expansion Slot Removable HDD bracket LP4 SATA breakout cable 20in SATA cable Hard Drive Protective Film Mounting Screws Instruction Manual
...

Turn Virtually any 2.5" SATA or SAS Hard Drive into a 3.5" SATA Drive A trayless design & support for 15mm drives enables quick & easy install/removal of drives, including newer high capacity drives Uses standard 3.5" form factor mounting points, along with 3 mounting points on the sides, for compatibility with some OEM branded systems, such as Dell Can be mounted into a 3.5" front bay as a 2.5" HDD Mobile Rack or treated as a regular 3.5" hard drive The 25SATSAS35 2.5-inch SATA/SAS to 3.5-inch SATA Hard Drive Converter converts a 2.5-inch SATA or SAS hard drive (HDD) or solid state drive (SSD) into a 3.5-inch form factor SATA Hard Drive. The converter provides a versatile solution for 2.5-inch drive installations, enabling you to install a 2.5-inch SATA/SAS drive in a 3.5-inch bay, drive drawer caddy/tray, or into a 3.5-inch drive enclosure. Suitable for drives with a height of up to 15mm, virtually any 2.5-inch SATA or SAS hard drive can be made to look & function like a 3.5-inch hard drive
- complete with standard mounting points along the sides & bottom (including 3 points along the sides for compatibility with some Dell systems). The Drive Converter features a trayless design for simple drive installation & removal, & is constructed of durable, yet lightweight plastics, with ventilation openings to aid air flow & help keep hard drives running cooler. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. WhatÂ’s in the box 2.5" to 3.5" HDD Converter
...

Turn a 2.5in SATA drive into an external storage device with USB (Universal Serial Bus) 2.0 connectivity A compact, aluminum chassis construction makes for a light-weight & easily portable storage solution with optimal heat dissipation characteristics USB (Universal Serial Bus) 2.0 transfer rates up to 480 Mbps & ability to draw power from up to two USB (Universal Serial Bus) ports, means fast access without reliance on external power Backed by a Star Tech.com 2-year warranty & free lifetime technical support This USB (Universal Serial Bus) to SATA External Hard Drive Enclosure transforms virtually any 2.5in SATA (SATA, SATA II, SATA III) laptop hard drive or SSD into the perfect portable storage solution! Ideal for storing digital multimedia & other demanding applications, the enclosure let''s you get the most out of your hard drive, connecting to a host computer using USB (Universal Serial Bus) 2.0 (also backward compatible with USB (Universal Serial Bus) 1.1) for maximum data transfer rates of up to 480 Mbps. Large capacity drives (tested with up to 1TB) can be used to greatly enhance your computer''s storage/backup capabilities. A truly portable solution, the external hard drive enclosure features lightweight, yet durable aluminum construction, as well as a small form factor design that fits perfectly into your pocket or notebook bag when not in use. Plus, to eliminate the hassle of having to find a power outlet when you are ready to back up your data or load your stored files, the USB (Universal Serial Bus) SATA hard drive enclosure requires no external power supply, as it is powered through its USB (Universal Serial Bus) connection to the computer. WhatÂ’s in the box 2.5" SATA Enclosure USB (Universal Serial Bus) 2.0 Y-Cable Screw Kit Mini Screwdriver Protective Case Instruction Manual ...