This PCI Express based Powered USB (Universal Serial Bus) Adapter Card adds three Powered USB (Universal Serial Bus) (USB Plus Power) ports to any computer, through an available PCI Express Slot, & features a low profile design that is ideal for installations in a small form factor computer case. Drawing power from either the PCI Express slot or the computer power supply, the Powered USB (Universal Serial Bus) adapter card provides up to 3A of current to each connected device, allowing for up to three Powered USB (Universal Serial Bus) devices to be installed at a time. Plus, this PCI Powered USB (Universal Serial Bus) Adapter Card can be connected to Star Tech.com's 2 Port 12V/24V Powered USB (Universal Serial Bus) Adapter Card (PUSBADAP), to create two additional Powered USB (Universal Serial Bus) ports, without using an extra PCI Express slot. ...

This PCI based Powered USB (Universal Serial Bus) Adapter Card adds three Powered USB (Universal Serial Bus) (USB Plus Power) ports to any computer, through an available PCI Slot. Drawing power from either the PCI slot or the computer power supply, the Powered USB (Universal Serial Bus) adapter card provides up to 3A of current to each connected device, allowing for up to three Powered USB (Universal Serial Bus) devices to be installed at a time. Plus, this PCI Powered USB (Universal Serial Bus) Adapter Card can be connected to Star Tech.coms 2 Port 12V/24V Powered USB (Universal Serial Bus) Adapter Card (PUSBADAP), to create two additional Powered USB (Universal Serial Bus) ports, without using an extra PCI slot. ...

This PCI Express based 12V Powered USB (Universal Serial Bus) Card means that you can add three Powered USB (Universal Serial Bus) (USB Plus Power) ports to any standard form-factor sized computer, using an available PCI Express Slot. Drawing power from either the PCI Express slot or the computer power supply, the powered USB (Universal Serial Bus) adapter card provides up to 3A of current to each connected device, allowing for up to three Powered USB (Universal Serial Bus) devices to be installed at the same time. Plus, the PCI Express Powered USB (Universal Serial Bus) Adapter card can be connected to the corresponding accessory daughter board PUSBADAP (2 Port Low Profile 12V/24V Powered USB (Universal Serial Bus) Adapter Card), to create two additional Powered USB (Universal Serial Bus) ports, but does not require a second PCI Express slot. ...

The Star Tech.com PC99 3-in-1 Extension Cable allows keyboard, monitor, & mouse cables to be extended without the mess & tangle of 3 separate traditional cables. Our exclusive design takes 3 separate extension cables & fuses them into 1 neat tangle-free ten-foot black cable. Each connector end is colour coded according to PC99 specifications for ease of identification when connecting the peripherals. The video component of the cable is constructed with high-quality mini-coaxial wire for crystal clear video quality at any resolution. Double shielding & a ferrite core on the video cable virtually eliminate any external signal interference. If a speaker extension is also required, check out the Star Tech.com 4-in-1 extension cables. ...

Star Tech.com's professional line of 3-in-1 PS/2 KVM cables are specifically designed to work with your Star View or Server Remote Control KVM switch, integrating the necessary PS/2 peripheral connections as well as the VGA connection into a single cable
- reducing tangles while maintaining excellent performance. This 15ft 3-in-1 PS/2 KVM switch cable features an ultra-thin design & is constructed of only high quality materials. Designed for durability & long-term reliability, this cable is backed by Star Tech.com's Lifetime Warranty. High-density connector reduces the number of connections to the KVM Designed to work at resolutions of up to 1920x 1440 High quality design eliminates video ghosting for optimal performance
...

The Star Tech.com PC99 3-in-1 Extension Cable allows keyboard, monitor, & mouse cables to be extended without the mess & tangle of 3 separate traditional cables. The exclusive design takes 3 separate extension cables & fuses them into 1 neat tangle-free cable. Each connector end is color coded according to PC99 specifications for ease of identification when connecting the peripherals. The video component of the cable is constructed with high-quality mini-coaxial wire for crystal clear video quality at any resolution. Double shielding & a ferrite core on the video cable virtually eliminate any external signal interference. If a speaker extension is also required, check out the Star Tech.com 4-in-1 extension cables. ...

Hot swap up to four 3.5in SATA hard drives in seconds. This 4 Bay SATA Mobile Rack lets you swap between 3.5in Serial ATA (SATA, SATA II, & SATA III-6 Gbps) hard drives in seconds.A time saving storage solution, the mobile rack offers four trayless SATA hard drive bays, allowing you to hot swap Serial ATA hard drives but avoid having to mount the drives to trays for deployment or unfasten them for replacement. Supporting up to four hard drives, the mobile SATA hot swap rack only takes up three 5.25in drive bays inside a host computer
- maximizing space-efficiency within the computer. With support for SATA HDD speeds up to 6.0 Gbps, the mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance & versatility for enhanced storage applications. Using Terabyte hard drives? Don't expose your hard drive & valuable data to unnecessary heat! The HSB430SATBK has two built-in 40mm fans that re-distribute the heat build-up generated as a result of typical drive operation. This feature is especially important for larger volume storage drives, & faster "spinning" drives (i.e. 7200 RPM), as it can help optimize drive operability & in turn preserve stored data integrity.
...

This high quality SATA/SAS Removable Hard Drive Mobile Rack delivers a convenient Serial Attached SCSI or SATA storage option, allowing you to quickly swap SAS/SATA hard drives in & out of a computer without having to open the computer case
- an ideal solution for RAID implementations, multi-boot OS configurations, & high-speed, high capacity backups in mission critical PCs or servers. Simply install the (included) drive bay into a 5.25in drive bay on the host computer, then mount a 3.5in SAS or SATA HDD in the (removable) caddy. Connecting the hard drive to the computer is as easy as inserting the caddy (with drive attached) into the drive bay, which can be locked to prevent unauthorized removal of the installed drive.A practical, time-saving storage solution, the drive drawer/mobile rack features front panel LED indicators that continuously display the operating status of the installed drive. With support for SATA HDD speeds up to 6.0 Gbps, the mobile rack/backplane is fully compatible with RAID installations to ensure maximum performance & versatility for enhanced storage applications. The drive caddy features a built-in 80mm fan (with adjustable speeds) that helps to keep the enclosed drive cool, in turn helping to optimize operation while preserving drive lifespan. To prevent damage to the hard drive (s) while being transferred in & out of the computer, the drive caddy features shock absorbers & rubber cushioning that help limit vibration/shock to the drive.A dependable, long-lasting storage solution, the SAS/SATA drive drawer features highly durable construction, with a 25K insertion rating.
...

The SAT3510U2FGB External Hard Drive Enclosure supports both USB (Universal Serial Bus) 2.0 & Fire Wire 400 (IEEE1394a) host connections, providing the compatibility needed to create a convenient & versatile external SATA storage solution for desktop computers as well as Mac Books & Windows based laptops. The USB/ Fire Wire enclosure features a slim, lightweight aluminum design &

Includes:: a 6-pin Fire Wire cable simplifying the option to connect through IEEE 1394a, as well as a USB (Universal Serial Bus) 2.0 cable for connecting to the host through USB (Universal Serial Bus).

...

Overview This triple fan hard drive cooler provides maximum airflow for hot-running hard drives, preventing overheating failures & extending the life of the drive. The fan unit mounts in any free 5.25 inch drive bay, & the hard drive is mounted directly behind it using the supplied 3.5 inch to 5.25 inch adapter brackets; the fans draw fresh external air into the case through a removable, cleanable filter & blows the cooler air over the surface of the hard drive
- a cost-effective solution that can help extend the life of hot running 7200 RPM, 10, 000, or 15, 000 RPM IDE & SCSI hard drives in servers or workstations.

Features: Standard 5.25in front bay form factor Mounting bracket for almost any 3.5in hard drive Three 40mm ball bearing cooling fans Cleanable air filter Warranty Information Warranty
- 2 Years Hardware Number of Drives
- 1 Drive Size
- 3.5in Fans 3
- 40 mm Fan Bearing Type
- Ball Bearing Filter Type
- Mesh Connector (s) Connector Type (s)
- 1
- LP4 (4 pin; Molex Large Drive Power) Male Performance Fan RPM 5000 +/- 10% Air Flow Rate
- 4.17 CFM Noise Level
- 38 d BA MTBF
- 45, 000 Hours Physical Characteristics Color
- Black Enclosure Type Plastic Product Width
- 150 mm [5.9 in] Product Height
- 40 mm [1.6 in] Product Weight
- 249 g [8.8 oz] Special Notes / Requirements System & Cable Requirements
- Available 5.25in front bay Packaging Information Shipping (Package) Weight
- 0.3kg [0.6 lb] Whats in the Box Included in Package 1
- 5.25in Bay with Fans 1
- 3.5in HDD Mounting Bracket 1
- Set of Mounting Screws






















...