The Shadow SHELL from U-Bop protects your phone without hiding its good looks or adding a lot of bulk. Cutouts have been incorporated in the case to allow easy access to the features of the device. The case is a set of partially flexible, strong & tough form-fitting face & back covers. Snap-on installation, no disassembly of the device is required. The Shadow SHELL from U-Bop is produced from a semi-hard rubberised plastic. This is moulded to have a matte outer layered finish which is easy to grip & handle. The case is formed of 2 parts which click & clip together & close over the full outer body of the device to offer maximum protection. Rubberised outer coating provides a no-slip outer finish & access to controls & ports. The design of the case protects vulnerable parts of your device, such as the corners, edges & sides ...

The Shadow SHELL from U-Bop protects your phone without hiding its good looks or adding a lot of bulk. Cutouts have been incorporated in the case to allow easy access to the features of the device. The case is a set of partially flexible, strong & tough form-fitting face & back covers. Snap-on installation, no disassembly of the device is required. The Shadow SHELL from U-Bop is produced from a semi-hard rubberised plastic. This is moulded to have a matte outer layered finish which is easy to grip & handle. The case is formed of 2 parts which click & clip together & close over the full outer body of the device to offer maximum protection. Rubberised outer coating provides a no-slip outer finish & access to controls & ports. The design of the case protects vulnerable parts of your device, such as the corners, edges & sides ...

The Shadow SHELL from U-Bop protects your phone without hiding its good looks or adding a lot of bulk. Cutouts have been incorporated in the case to allow easy access to the features of the device. The case is a set of partially flexible, strong & tough form-fitting face & back covers. Snap-on installation, no disassembly of the device is required. The Shadow SHELL from U-Bop is produced from a semi-hard rubberised plastic. This is moulded to have a matte outer layered finish which is easy to grip & handle. The case is formed of 2 parts which click & clip together & close over the full outer body of the device to offer maximum protection. Rubberised outer coating provides a no-slip outer finish & access to controls & ports. The design of the case protects vulnerable parts of your device, such as the corners, edges & sides ...

The Shadow SHELL from U-Bop protects your phone without hiding its good looks or adding a lot of bulk. Cutouts have been incorporated in the case to allow easy access to the features of the device. The case is a set of partially flexible, strong & tough form-fitting face & back covers. Snap-on installation, no disassembly of the device is required. The Shadow SHELL from U-Bop is produced from a semi-hard rubberised plastic. This is moulded to have a matte outer layered finish which is easy to grip & handle. The case is formed of 2 parts which click & clip together & close over the full outer body of the device to offer maximum protection. Rubberised outer coating provides a no-slip outer finish & access to controls & ports. The design of the case protects vulnerable parts of your device, such as the corners, edges & sides ...

The Shadow SHELL from U-Bop protects your phone without hiding its good looks or adding a lot of bulk. Cutouts have been incorporated in the case to allow easy access to the features of the device. The case is a set of partially flexible, strong & tough form-fitting face & back covers. Snap-on installation, no disassembly of the device is required. The Shadow SHELL from U-Bop is produced from a semi-hard rubberised plastic. This is moulded to have a matte outer layered finish which is easy to grip & handle. The case is formed of 2 parts which click & clip together & close over the full outer body of the device to offer maximum protection. Rubberised outer coating provides a no-slip outer finish & access to controls & ports. The design of the case protects vulnerable parts of your device, such as the corners, edges & sides ...

Shake & Shine Glitter Lamp (assorted) Turn on your hand held Shake & Shine Glitter light with just a shake! Sit back & watch it shine for a minute or so, colour changing all the time. This is a fun little lamp when you shake it it lights up with lights which change from red, green, blue, violet, yellow. The Shake & Shine light also has glitter which adds an extra sparkle when it has sat still for a few minutes it turns off until you shake it again. Shake & Shine Glitter lamp

Features: Requires 3 x LR44 batteries (included) Measures approx 6.

...

Shampoo your hair without water or rinsing. The alcohol free shampoo leaves hair fresh, clean & odour free, whilst the conditioner eliminates tangled hair, leaving it soft, silky & easy to manage. Easier still, choose a shampoo cap which contains sham ...

In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...

In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...

In case it's getting tough! The Sharkoon BD28 is a PC case in ATX format, geared for the needs of gamers & enthusiasts. The case is available in red, blue & green, with the internal lacquer, fan color as well as the front LED also in the matching color. Next is a gunmetal edition with 2x blue LED fans & a black interior finish. The acrylic side panel provides, in all color variations, insight into the inner life of the built-in components. Generous Space With a width of 235 mm & generously broad side panels, easy installation of large tower coolers with a height of up to 179 mm is guaranteed. Likewise, the BD28 offers more options for the installation & unobtrusive wiring of all components. Extra-long graphics cards up to 41.5 cm can be installed due to the modular hard drive management. If equipped with the maximum 2.5 ¢‚¬ hard drives/SSDs, the BD28 still offers enough space for VGA boards up to 32.5 cm. Fan Configuration With the pre-installed Low Noise 120 mm LED fans in the front as well on the back, it's already arranged for optimal cooling. To further enhance the air flow inside the case, up to three additional fans can be installed. On the top of the case there is space for either two 120 mm, two 140 mm or a 180 mm fan. In the front, there are already prepared holes to mount an additional 120 mm fan. To correspond with the internal color design elements the lights are matched to compliment the color version. With the red version a red LED fan illuminates in the case's front & backside, this is also true with the blue & green versions with their respective colors. Front Connection Two USB (Universal Serial Bus) 3.0, two audio as well as two USB (Universal Serial Bus) 2.0 ports in the front offer quick access for connecting peripherals devices. In the event that the mainboard does not have an internal USB (Universal Serial Bus) 3.0 connector, the two USB (Universal Serial Bus) 3.0 ports can also optionally connect & operate in USB (Universal Serial Bus) 2.0 mode. Installation Options for Drives The case offers two 5.25 ¢‚¬& Aring;“ drive bays for screwless installation of optical drives. For the installation of card readers or other devices in 3.5" format a 5.25" adapter is included. Up to three 3.5" HDDs & four 2.5" HDD/SDD can be mounted without screws due to the included rack mounting system. An additional 2.5" HDD/SSD can be mounted on the bottom of the case, if needed.

Features: ATX case 2x 5.25" drive bays (external), 1 mounting adapter for 2.5" & 3.5" HDD/SSD included 4x 2.5" HDD/SSD bays (rail type) with removable design 3x 3.5" HDD bays (rail type) 1x 2.5" HDD/SSD bay (screw type) Front I/O: 2x USB3.0 (internal 19-pin mainboard connector), 2x USB2.0, 2x audio Quick fasteners 2 openings for water cooling Acrylic side panel Cable management system Supports VGA cards up to 32.5 cm in length (up to 41.5 cm, if middle HDD cage is removed) Dimensions: 480 x 235 x 460 mm (L x W x H) Weight: ~6.5kg

...