More From Contributor

£4.98
Scythe Mini Kaze, 40mm x 10mm Quiet Cooling Fan The Mini Kaze, an ideal replacement for any 40mm chipset, external HDD case cooling fan & removable case cooling fan. Introducing Scythe's quiet 40mm fan to help reduce the noise of your already quiet PC system. This fan is an ideal replacement for any 40mm chipset, external HDD case cooling fan & removable case cooling fan. Features 40 x 10mm quiet PC cooling fan Noise level 14.0 d B (A) 2-pin & 3-pin connectors Great value Perfect for Chipset/VGA Cooling Specifications: Fan size (edge to edge)
- 40 mm Screw hole spacings
- 32 mm Model
- SY124010L Air volume at full speed (12V), CFM ±10%
- 4.11 Noise level at full speed (12V), d B (A)
- 14 Fan speed at full speed (12V), RPM ±10%
- 3500 Weight, g
- 65 Approximate cable length
- 11cm 2-pin, 22cm with 3-pin adapter Life expectancy @ 25°C continuous product use
- 2 years Power connector
- 3-pin & 2-pin Bearing type
- Sleeve Accessories
- 2-pin to 3-pin converter Fan depth
- 10 mm












...
Available
£4.98
Scythe Mini Kaze 50mm Quiet Fan Scythe's 50mm Mini Kaze is designed to replace any 12V 50mm 2-pin or 3-pin fan, whilst making only a fraction of the noise. Scythe's 50mm Mini Kaze is designed to replace any other 12V 50mm fan, whilst making only a fraction of the noise. The Silent Mini Kaze 50mm fan uses by default a 2-pin connector. Included with the fan is an adapter to convert the 2-pin connector to a standard 3-pin connector, thus providing the best compatibility for both old & new hardware. Features Ideal replacement for very noisy 50mm fans 2-pin & 3-pin connectors Great value Specifications:

Dimensions
- 50 x 50 x 10 mm Distance between hole centres
- 40 mm Weight
- 21g Noise Level
- 26.09 d BA Air Flow
- 9.4 CFM Fan Speed
- 4, 500 rpm Starting Voltage
- 9 V Current
- 0.06A Operating Voltage
- 10.8 ~ 13.2 V MTBF
- 30, 000 h Accessories
- Mounting Screws, 2-pin to 3-pin adapter Warranty
- 24 months













...
Available
£4.79
Scythe Mini Kaze 60mm Quiet Fan Scythe's 60mm Mini Kaze is designed to replace any 12V 60mm 2-pin or 3-pin fan, whilst making only a fraction of the noise. Scythe's 60mm Mini Kaze is designed to replace any other 12V 60mm fan, whilst making only a fraction of the noise. The Silent Mini Kaze 60mm fan comes with a 2-pin connector. Included with the fan is an adapter to convert the 2-pin connector to a standard 3-pin connector, thus providing the best compatibility for both old & new hardware. Note: This fan is supplied with mounting bolts & not self-tapping screws. Features Ideal replacement for very noisy 60mm fans 2-pin & 3-pin connectors Great value 20mm thick Specifications:

Dimensions
- 60 x 60 x 20 mm Screw hole spacings
- 50 mm Weight
- 48 g Noise Level
- 19.99 d BA Air Flow
- 12.3 CFM Fan Speed
- 2, 500 rpm Starting Voltage
- 9 V Operating Voltage
- 10.8 ~ 13.2 V MTBF
- 30, 000 h Accessories
- Mounting Screws, 2-pin to 3-pin adapter Warranty
- 24 months












...
Available
£4.98
Scythe Mini Kaze Ultra, 40mm x 20mm Quiet Cooling Fan Features 40 x 20mm quiet PC cooling fan Noise level 19.6 d B (A) 2-pin & 3-pin connectors Great value Perfect for Chipset/VGA Cooling Specifications: Fan size (edge to edge)
- 40 mm Screw hole spacings
- 32 mm Model
- SY124020L Air volume at full speed (12V), CFM ±10%
- 4.86 Noise level at full speed (12V), d B (A)
- 19.56 Fan speed at full speed (12V), RPM ±10%
- 3500 Weight, g
- 80 Approximate cable length
- 11cm 2-pin, 22cm 3-pin Life expectancy @ 25°C continuous product use
- 2 years Power connector
- 3-pin & 2-pin Bearing type
- Sleeve Accessories
- 2-pin to 3-pin converter Fan depth
- 20 mm Rated voltage
- 12 VDC Warranty
- 24 months














...
Available
£40.34
Introducing the third generation of the Mugen CPU cooler from Scythe which now features greater performance & easier installation compared to the Mugen 2. The third version of Mugen provides higher compatibility, a more compactly designed fin arrangement & a better thought out backplate. The total cooling performance has been increased by refining the M.A.P.S. (Multiple Airflow Pass-through Structure). The Mugen 3 comes with a very quiet " Slip Stream" PWM fan for minimising the noise level at low load as well as maintaining cooling performance at heavy load. F.M.S.B.4 (Flip Mount Super Back-Plate 4) Introducing F.M.B.S.4 (Flip Mount Super Back-Plate 4) for higher compatibility with new generation motherboards! This universally compatible Back-Plate is capable of mounting large coolers extremely securely! Slip Stream PWM + Wide Range Cooling Purposes The fan motor applied is a Slipstream PWM 120 x 120 x 25mm small axis large fan blade model, which minimises the noise at low load, as well as maximising the performance of Mugen 3 during heavy load periods. The fan runs at a minimum speed of around 300 RPM up to 1600 RPM, generating air flow from 14.7 to 88.1 CFM & noise levels of 9.6 ~ 32.15 d BA respectively. The overall cooling has been carefully designed to meet Scythes Wide Range Cooling Purposes philosophy, providing high level performance for both users who require a very quiet cooler or users who want maximum performance. M.A.P.S. (Multiple Airflow Pass-Through Structure) By introducing the newly refined M.A.P.S. (Multiple Airflow Pass-through Structure) the total cooling performance has been upgraded by optimising the pass-through function of the airflow & enhancement of the sturdiness of the heatsink. Specifications
- Model Number
- SCMG-3000 Compatibility
- Intel LGA2011/1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, requires motherboard removal Combined

Dimensions
- 130 x 100 x 158 mm Fan

Dimensions
- 120 x 120 x 25 mm Noise Level
- 9.60
- 32.15 d BA Air Flow
- 14.7
- 88.11 CFM Fan Speed
- 300 (±180 RPM)
- 1600 (±10%) Static Pressure
- 0.34 mm H2O / 3.33 Pa Weight
- 825 g Material of Base Plate
- Nickel-plated copper




















...
Available
£24.46
The Samurai is back & now it's LGA2011 & LGA1366 compatible. You might already be aware that Scythe had previously released a CPU cooler called the Samurai. The original Samurai was a great success for Scythe & it would not surprise us if this was the sole reason they decided to use the same name on their newest offering. However, the only similarity between the old Samurai & the new Samurai ZZ is the name. The new cooler looks nothing like its predecessor, as you can see from the image below. When looking to choose a CPU cooler, there are many factors to consider. Here at Quietpc.com, naturally we believe that one of the most important factors is noise, & the quieter the better. The Samurai ZZ is not the quietest CPU cooler we stock but in contrast to a stock cooler it is very quiet indeed. Another important factor is performance: there is no point in changing a cooler if it is going to result in higher CPU temperatures. Again, the Samurai ZZ excels there. enhanced quieter cooling
- an excellent combination! Specifications
- Model Number
- SCSMZ-2100 Compatibility
- Intel LGA2011/1366/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754 Max TDP
- 95W or lower for quiet operation, 130W Max Installation method
- Intel & AMD
- push-pins or clips, does not require motherboard removal Weight
- 500g inc fan

Dimensions
- 94 x 122 x 94 (H) mm, inc fan

Dimensions of fan
- 92 x 92 x 25 mm Heatsink clearance
- 30 mm Noise Level
- 7.2
- 31.07 d BA Air flow
- 6.7
- 55.55 CFM Fan speed
- 300
- 2, 500 rpm (regulated via PWM) Accessories included
- VTMS mounting clips & thermal grease Base plate material
- Nickel-plated copper






















...
Available
£26.49
If you are a fan of old Ninja movies then you might know what a Shuriken actually is. If not, it is a metal star-shaped object more commonly known as a "death star", ninja star or even "throwing star". Ninjas use them as a weapon that they can conceal in their clothing & then throw toward their enemies to inflict as much pain as possible! In the movies, the goodies always seem to hit the baddies directly between the eyes: at least it was a quick death! As to why Scythe have decided to name their latest CPU cooler Shuriken is anyone's guess! It might be because of the cutting-edge (sorry!) performance it provides, or perhaps because Scythe are running out of Japanese names to call their products. Whatever the reasons are, no doubt Scythe will continue to provide us with some of the strangest names for CPU coolers ever conceived! The Scythe Shuriken is essentially a smaller version of the Zipang. Measuring only 64mm in height, this cooler should have no problems fitting inside a low profile or media centre chassis. It uses three heatpipes which have been bent into an oval shape. The heat generated by the CPU feeds through both sides of the heatpipes & is transferred into the large aluminium fins. The heatpipes are soldered to the underside of the large heatsink which helps to reduce the cooler's overall height. Mounted on the top of the large aluminium heatsink is an oddly-sized 100mm PWM fan. The PWM function allows the motherboard to control the fan's RPM based on the temperature of the CPU. This means that if things start to heat up then the fan speed will increase to compensate for the additional heat. Another odd feature about the fan is that it is only 12mm thick: another height-saving feature. The Shuriken has been designed to provide compatibility with the most common desktop motherboards. Intel's socket 478, LGA775 & AMD's socket 754, 939, 940 & AM2 platforms are all supported. The new Rev B version increases compatibility even further, Intel's LGA1366, LGA1155/6 & AMD's AM2+ & AM3 sockets are now all covered! In summary, if you require a CPU cooler that has the credentials to perform but your choices are restricted from a space point of view then the Scythe Shuriken could be just what you are looking for. Specifications
- Model Number
- SCSK-1100 Compatibility
- Intel LGA1366/1155/1156/775/478 & AMD FM1/AM3+/AM3/AM2+/AM2/939/940/754 Max TDP
- 95W Installation Method
- Intel & AMD
- push-pins or clips, does not require motherboard removal

Dimensions
- 105 x 116 x 64mm Fan Speed
- 650
- 2200rpm (±10%) Fan Noise
- 10.5d BA
- 31.67d BA Air Flow
- 11.81CFM
- 31.91CFM Weight
- 355g















...
Available
£11.99
Italeri 1/72 Sd. Kfz. 251/7 Pioneerpanzerwagen. This box contains an unassembled plastic model kit. Cement & paint needed to finish model as shown are not included. Multilingual instruction sheet with drawings & decal sheet included. 2 Figures Included. ...
Archived Product
£11.99
Sd. Kfz. 251/16 Flammpanzerwagen 1:72
- 7067
- Italeri. The Sd. Kfz.251 half-track was an armored fighting vehicle & was used

...
Archived Product
£44.99
Italeri 1/35 Sd Kfz 232 6 Rad with resin parts. This box contains an unassembled plastic model kit. Cement & paint needed to finish model as shown are not included. Multilingual instruction sheet with drawings & decal sheet included.161 plastic parts, 37 resin parts & 1 photo etched part. ...
Archived Product

Scythe Mugen 4 SCMG-4000 High Performance CPU Cooler

Scythe Mugen 4 High Performance CPU Cooler, SCMG-4000 The next instalment of Mugen provides a three-dimensional multiple airflow pass-through structure fin design, greater compatibility and an easy mounting method. The Mugen 4 comes with a very quiet GlideStream PWM fan (starts at only 5.3 dBA) to minimise the noise level at low load as well as maintaining cooling performance at heavy load. Features: Greater performance over the Mugen 3 Total of six U-shaped heatpipes Features TMAPS for better airflow and performance Extremely quiet, from only 5.3 dBA Compatible with Intel LGA2011/1366/1150/1155/1156/775 and AMD FM1/AM3+/AM3/AM2+/AM2 T-M.A.P.S. (Three-dimensional Multiple Airflow Pass- through Structure): The Mugen 4s unique fin structure decreases air resistance and optimises cooling
performance in the lower rpm-range of the supplied fan. Furthermore, the smart arrangement of the fin layout made space for one more pair of fins without negatively affecting the total height. User-friendly Installation: The fundamental change to the Mugen 3 is in the mounting system of the Mugen 4. The new H.P.M.S (Hyper Precision Mounting System) makes easy mounting possible by allowing the Mugen 4 to be fitted without having to remove the motherboard from the case. This reduces the number of steps involved and makes for an easier life! Multi Fan Mount Structure: Following in its predecessors footsteps, the Mugen 4s design also allows variable fan placement to optimise a targeted airflow. To further enhance cooling performance, a second fan can be mounted with the supplied pair of fan
clips. Specifications: Model Number - SCMG-4000 Compatibility - Intel LGA2011/1366/1150/1155/1156/775 and AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP - All Installation Method - Intel and AMD - backplate, ideally requires motherboard removal Combined Dimensions - 130 x 88 x 156.5 mm Fan Dimensions 120 x 120 x 25 mm Noise Level - 5.3 - 28.0 dBA Air Flow - 20.7 - 79.0 CFM Fan Speed - 400(±200 RPM) - 1400(±10%) PWM Static Pressure 0.12 - 1.56 mm H2O Weight 625g heatsink only Material of Base Plate Nickel-plated copper Warranty - 24 months
Availability: In Stock
£39.40

Product Description

Scythe Mugen 4 High Performance CPU Cooler, SCMG-4000 The next instalment of Mugen provides a three-dimensional multiple airflow pass-through structure fin design, greater compatibility & an easy mounting method. The Mugen 4 comes with a very quiet Glide Stream PWM fan (starts at only 5.3 d BA) to minimise the noise level at low load as well as maintaining cooling performance at heavy load.

Features:
Greater performance over the Mugen 3 Total of six U-shaped heatpipes Features TMAPS for better airflow & performance Extremely quiet, from only 5.3 d BA Compatible with Intel LGA2011/1366/1150/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 T-M.A.P.S. (Three-dimensional Multiple Airflow Pass- through Structure): The Mugen 4s unique fin structure decreases air resistance & optimises cooling performance in the lower rpm-range of the supplied fan. Furthermore, the smart arrangement of the fin layout made space for one more pair of fins without negatively affecting the total height. User-friendly Installation: The fundamental change to the Mugen 3 is in the mounting system of the Mugen 4. The new H.P.M.S (Hyper Precision Mounting System) makes easy mounting possible by allowing the Mugen 4 to be fitted without having to remove the motherboard from the case. This reduces the number of steps involved & makes for an easier life! Multi Fan Mount Structure: Following in its predecessors footsteps, the Mugen 4s design also allows variable fan placement to optimise a targeted airflow. To further enhance cooling performance, a second fan can be mounted with the supplied pair of fan clips. Specifications: Model Number
- SCMG-4000 Compatibility
- Intel LGA2011/1366/1150/1155/1156/775 & AMD FM1/AM3+/AM3/AM2+/AM2 Max TDP
- All Installation Method
- Intel & AMD
- backplate, ideally requires motherboard removal Combined

Dimensions
- 130 x 88 x 156.5 mm Fan

Dimensions 120 x 120 x 25 mm Noise Level
- 5.3
- 28.0 d BA Air Flow
- 20.7
- 79.0 CFM Fan Speed
- 400 (±200 RPM)
- 1400 (±10%) PWM Static Pressure 0.12
- 1.56 mm H2O Weight 625g heatsink only Material of Base Plate Nickel-plated copper Warranty
- 24 months

Reviews/Comments

Add New

Price History

Vouchers

No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.

Facebook

Jargon Buster

Nickel - A corrosion resistant conductive metal
Copper - A metal element with a chemical formula of CU. A excellent conductor of electricity and heat.
CPU - Central processing unit. The processing centre of computer programs. The faster the processor usually the faster the computer
Warranty - A service provided by the retailer or manufacturer to ensure a device works for a period from new
Intel - World leaders in silicon chip development and manufacture. Chips for Laptops, desktops and mobile devices. Their main competitor is AMD (Advanced Micro Devices)
AMD - Advanced Micro Devices. A silicon chip manufacturer for desktop, laptop and mobile devices. Also owners of ATI a leading graphics processor chip manufacturer
RPM - Revolutionss per minute, the number of rotations per minute around a fixed axel.
heavy - A concept of weight indicating an item may require some effort to lift or move
weight - A measure of the force applied on an object by gravity. Measured metric in grams and kilos or imperial in lbs and oz
speed - A measurement of how fast an object travels between two points
Weight - a measurement of how heavy an object appears due to the pull of gravity. For example the weight of an object on planet earth will be different to the weight of the object on the moon
Warranty - A purchasers guarantee from the manufacturer for replacement/fix of goods when faulty.
Minimise - To reduce or lower the amount of something.
Dimensions - The shapes and angles of something or a situation.
Design - A drawing or styles that shows the look and functionality of something before its made.
Clips - A fastening device to secure something to another item, also a form of trimming something.
Performance - When someone is presenting a form of entertainment, also how well someone is doing within a role.
Fan - A piece of equipment that has blades that rotate to cool the air, can be installed within other equipment,
Model - A representation of a person or thing, usually smaller scale. It can also be a person that wears clothing.

Supplier Information

Ebuyer Business
Get ready to power up your tech game with Ebuyer (https://www.ebuyer.com/)! Explore a vast selection of the latest gadgets, electronics, and computing essentials at unbeatable prices. From cutting-edge laptops and gaming PCs to home appliances and office supplies, we've got everything you need to stay connected and productive. With fast delivery and top-notch customer service, Ebuyer is your go-to destination for all things tech. Don't settle for less – shop now and take your tech game to the next level with Ebuyer!
Page Updated: 2024-02-28 09:26:27

Community Generated Product Tags

Oh No! The productWIKI community hasn't generated any tags for this product yet!
Menu