United Kingdom
France
Germany
Netherlands
Sweden
USA
Italy
Spain
More From Contributor
Samsung HD103SJ Spinpoint F3 1TB Hard Drive SATAII 7200rpm 32MB Cache
- OEM
Samsung Spinpoint drive by Seagate The Spinpoint F3 operates at 7200RPM with up to 1 Terabyte (TB) data storage capacity by using two 500 Gigabyte (GB) per platter disks. As well as meeting data center requirements for addition storage to meet rising demand and increasing performance needs, the drives also deliver high-performance with lower power for desktop computers and servers. The Spinpoint F3 utilizes advanced 500GB per platter technology, so that two-platter 1TB capacity is achieved. Increased areal density per platter provides up to a 30 percent higher performance than a three-platter 1TB in the same 3.5" form factor. A reduction in mechanical parts also contributes to enhanced reliability in terms of anti-shock and data failure. Samsungs hard drive utilizes its low noise
operation technology SilentSeek and NoiseGuard to achieve a quiet operation system. In addition, the Spinpoint F3 is compliant with the restriction of hazardous substances directive. Key Features Formatted capacity: 1TB Serial ATA 3.0Gbps Interface Support Environment friendly product with RoHS compliance ATA 48-bit Address Feature NoiseGuard™ & SilentSeek™ technologies Drive Configurations Capacity: 1 TB Interface: Serial ATA 3.0Gbps Buffer DRAM Size: 32 MB Byte per Sector: 512 bytes Rotational Speed: 7, 200 RPM Performance Specifications Average Seek time(typical): 8.9 ms Data Transfer Rate / Media to/from Buffer(Max.): 250 MB/sec Data Transfer Rate / Buffer to/from Host(Max.): 300 MB/sec Average Latency: 4.17 ms Drive Ready Time(typical): 1 sector in 10^15bits Acoustics
Idle: 2.5 Bel Performance Seek: 2.8 Bel Environmental Specifications Temperature / Operating: 0 ~ 60 °C Temperature / Non-operating: -40 ~ 70 °C Humidity(non-condensing) / Operating: 5 ~ 90 % Humidity(non-condensing) / Non-operating: 5 ~ 95 % Liner Shock(1/2 sine pulse) / Operating: 70 G Liner Shock(1/2 sine pulse) / Non-operating: 300 G Altitude(relative to sea level) / Operating: -300 to 3, 000 m Altitude(relative to sea level) / Non-operating: -300 to 12, 000 m Power Requirements Voltage: +5V±5% Spin-up Current (Max.): 2.2A Seek (typical): 6.7W Read/Write (typical): 7.2W Idle (typical): 6.3W Standby (typical): 1W Sleep (typical):1W
operation technology SilentSeek and NoiseGuard to achieve a quiet operation system. In addition, the Spinpoint F3 is compliant with the restriction of hazardous substances directive. Key Features Formatted capacity: 1TB Serial ATA 3.0Gbps Interface Support Environment friendly product with RoHS compliance ATA 48-bit Address Feature NoiseGuard™ & SilentSeek™ technologies Drive Configurations Capacity: 1 TB Interface: Serial ATA 3.0Gbps Buffer DRAM Size: 32 MB Byte per Sector: 512 bytes Rotational Speed: 7, 200 RPM Performance Specifications Average Seek time(typical): 8.9 ms Data Transfer Rate / Media to/from Buffer(Max.): 250 MB/sec Data Transfer Rate / Buffer to/from Host(Max.): 300 MB/sec Average Latency: 4.17 ms Drive Ready Time(typical): 1 sector in 10^15bits Acoustics
Idle: 2.5 Bel Performance Seek: 2.8 Bel Environmental Specifications Temperature / Operating: 0 ~ 60 °C Temperature / Non-operating: -40 ~ 70 °C Humidity(non-condensing) / Operating: 5 ~ 90 % Humidity(non-condensing) / Non-operating: 5 ~ 95 % Liner Shock(1/2 sine pulse) / Operating: 70 G Liner Shock(1/2 sine pulse) / Non-operating: 300 G Altitude(relative to sea level) / Operating: -300 to 3, 000 m Altitude(relative to sea level) / Non-operating: -300 to 12, 000 m Power Requirements Voltage: +5V±5% Spin-up Current (Max.): 2.2A Seek (typical): 6.7W Read/Write (typical): 7.2W Idle (typical): 6.3W Standby (typical): 1W Sleep (typical):1W
Product Description
Reviews/Comments
Add New
Vouchers
No voucher codes found.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Do you know a voucher code for this product or supplier? Add it to Insights for others to use.
Denmark