Flake shellac dissolved in alcohol. Intended Use. Suitable for French Polishing all dark & light coloured woods, when a light to medium brown tone is required. Suitable for sealing wood before waxing. When applied correctly will produce a high gloss finish. Alcohol evaporates rapidly leaving a film of shellac on the surface of the timber. Wood should be clean & smooth. If grain is open, fill with Rustins Grainfiller. Furniture that is to be renovated should be cleaned with White Spirit & fine wire wool to ensurethat it is free from grease & wax. Apply as many coats as required to build a sufficient layer of shellac. For sealing wood before waxing, apply 2 liberal coats. ...

Rustins heat resistant paint is based on a high quality water-borne cross linking acrylic resin. I is a low VOC paint for use on metal & wood on both interior & exterior surfaces. The maximum heat resistance is approx 220&0176;C. Not suitable for use on wood burning stoves. ...

Rustins heat resistant paint is based on a high quality water-borne cross linking acrylic resin. I is a low VOC paint for use on metal & wood on both interior & exterior surfaces. The maximum heat resistance is approx 220&0176;C. Not suitable for use on wood burning stoves. ...

High Heat Black paint is a fast drying protective & decorative paint which is stable to temperatures up to 600C. Suitable for use on Ferrous Metals such as wood burning stoves, barbeques, domestic & industrial stoves, furnace chimeys, grats & exhausts. ...

Modified so as to increase the rate of drying & hardness of the film- Ideal for oiling bare wood adding to paint & softening Metal Glazing Putty. Not suitable for oiling furniture or wooden floors. For furniture use Rustins Danish Oil or Teak Oil. Forfloors use Rustins Floor Oil.-11 to 14 sq metres per litre per coat, depending on the absorbency of the wood.- Boiled to speed up drying time.- Slow drying. Dependant on temperature, humidity & film thickness. For faster drying linseed oil use Rustins Boiled Oil. ...

A two-part cold cure lacquer with excellent adhesion & durability. Almost colourless & will not craze or yellow on ageing. Resistant to scratching abrasion most solvents weak acids & alkalis. Can be applied to wood cork chipboard MDF laminates slate & stone. Re-coat able after 1-1. 1/2 hours floor can be used 2 hours after last coat has been applied. ...

A quick drying clear sealer that allows the application of both paints or varnishes unlike white MDF sealers which can only be painted. Touch dry in 30 minutes & can be re-coated in 2 hours. Clean brushes in water. Conforms to the Toys (Safety). Regulations 1995 BS: EN71 Part 3 which makes it absolutely ideal to use on childrens toys. ...

A pure natural non toxic oil which is completely free from solvent. It has good penetration into all types of timber without leaving a film & its special properties make it highly resistant to water, alcohol & food stuffs. It is additive free & safe for use in contact with food. It forms a hard wearing finish making it suitable for kitchen work surfaces, chopping boards & interior wood work. ...

For use on bare wood prior to finishing with any Rustins wood finishes. Quick drying penetrating stain, does not raise the grain. Supplied in a number of shades which may be intermixed to make an infinite variety of natural wood shades. Suitable for interior & exterior use. ...

Worktop Oil is a unique water-borne blend of natural plant oils & other special ingredients which nourishes & protects all types of timber. It is a ultra quick-drying wooden work surface treatment leaving a durable & water-resistant seal which is not vulnerable to scratching or chipping. Solvent Free. ...