Form Factor: Desktop, Micro ATX Motherboard Support: Micro ATX, Mini ITX PSU Support: Flex Gaming Case: No Water Cooling Ready: No Dimensions: 65mm x 310mm x 245mm (W x H x D) Packaging Dimensions: 130mm x 345mm x 300mm (W x H x D) Body

Material: SECC (Thickness 0.8mm) Front Bezel

Material: Plastic Side Panel: Vented External Bays: Internal Bays: 1 x 3.5 Internal Drive Bay Notes: Expansion Slots: Cooling Front: None Cooling Top: None Cooling Rear: None Cooling Side: None Cooling Bottom: 1 x 4cm Fan (Included) IO Ports: 2 x USB (Universal Serial Bus) 2.0 1 x HD Audio 1 x Microphone Front Bezel

Colour: Black/ Silver Body

Colour: Black System Cabinet

Features:

Includes:: 1x Fan Supports Micro ATX & Mini ITX MB External 4-Pin & Sata Port PSU Included: Yes Net Weight (KGs): 1.75 KGs











...

X-Viper Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here Key Features Support - Compliance with newest Intel standard ATX 12V, V2.2, V2.91, EPS12V Efficiency - 85% at typical MTBF > 100, 000 hrs Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter - for electromagnetic protection 80 Plus Bronze Certified - 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 110V~240V 13A at 110V, 6.5A at 240V 50-60 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 28A 28A 90A 0.8A 6A 1050W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 9 4-Pin Molex Connectors: 5 6+2 Pin PCI-e Connectors: 4 Floppy Drive Connectors: 1 Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 110V~240V Input Current: 13A at 110V, 6.5A at 240V Input Frequency Range: 50-60 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 88% MTBF: > 100, 000 Hours Protection: OVP/UVP/OPP/OTP/SCP Power: 1050W Operation Temperature: 0~50&194;&176;C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified
...

X-Viper Modular Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here With the addition of the modular version of the X-Viper Series, this allows for greater flexibility, due to you being able to use only the cables required for your PC. This will also help to reduce clutter in your PC & aid in your cooling efforts. Key Features Support - Compliance with newest Intel standards ATX 12V, V2.2, V2.91, EPS12V Efficiency - 85% at typical MTBF > 100, 000 hrs Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Smart Modularized Cable Management for better airflow by reducing cable clutter within built system & increasing heat removal Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter - for electromagnetic protection 80 Plus Bronze Certified - 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 100-240 VAC 13A at 115V, 6.5A at 240V 60/50 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 28A 28A 90A 0.8A 6A 1050W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 9 (Modular) 4-Pin Molex Connectors: 5 (Modular) 6+2 Pin PCI-e Connectors: 4 (Modular) Floppy Drive Connectors: 1 (Modular) Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 100-240 VAC Input Current: 13A at 115V, 6.5A at 240V Input Frequency Range: 60/50 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 82% MTBF: 100, 000 Hours Protection: OVP / UVP/ OTP / OCP/ OLP/ OPP/ SCP Power: 1050W Operation Temperature: 0~50&194;&176;C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified
...

X-Viper Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here Key Features Support
- Compliance with newest Intel standard ATX 12V, V2.2, V2.91, EPS12V Efficiency
- 85% at typical MTBF > 100, 000 hrs Cooling System
- Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection
- Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Key Components
- The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter
- for electromagnetic protection 80 Plus Bronze Certified
- 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 110V~240V 7A at 110V, 3.5A at 240V 60/50 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 24A 15A 35A 0.5A 2.5A 450W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 5 4-Pin Molex Connectors: 4 6+2 Pin PCI-e Connectors: 2 Floppy Drive Connectors: 1 Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 110V~240V Input Current: 7A at 110V, 3.5A at 240V Input Frequency Range: 60/50 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: > 17ms Efficiency: 85% Typically MTBF: > 100, 000 Hours Protection: OVP/UVP/OPP/OTP/SCP Power: 450W Operation Temperature: 0~50°C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified







...

X-Viper Modular Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here With the addition of the modular version of the X-Viper Series, this allows for greater flexibility, due to you being able to use only the cables required for your PC. This will also help to reduce clutter in your PC & aid in your cooling efforts. Key Features Support - Compliance with newest Intel standards ATX 12V, V2.2, V2.91, EPS12V Efficiency - 85% at typical MTBF > 100, 000 hrs Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Smart Modularized Cable Management for better airflow by reducing cable clutter within built system & increasing heat removal Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter - for electromagnetic protection 80 Plus Bronze Certified - 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 100-240 VAC 7A at 110V, 3.5A at 240V 60/50 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 24A 25A 35A 0.5A 2.5A 450W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 5 (Modular) 4-Pin Molex Connectors: 4 (Modular) 6+2 Pin PCI-e Connectors: 2 (Modular) Floppy Drive Connectors: 1 (Modular) Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 100-240 VAC Input Current: 7A at 110V, 3.5A at 240V Input Frequency Range: 60/50 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 82% MTBF: 100, 000 Hours Protection: OVP / UVP/ OTP / OCP/ OLP/ OPP/ SCP Power: 450W Operation Temperature: 0-45&194;&176;C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified
...

X-Viper Modular Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here With the addition of the modular version of the X-Viper Series, this allows for greater flexibility, due to you being able to use only the cables required for your PC. This will also help to reduce clutter in your PC & aid in your cooling efforts. Key Features Support - Compliance with newest Intel standards ATX 12V, V2.2, V2.91, EPS12V Efficiency - 85% at typical MTBF > 100, 000 hrs Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Smart Modularized Cable Management for better airflow by reducing cable clutter within built system & increasing heat removal Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter - for electromagnetic protection 80 Plus Bronze Certified - 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 100-240 VAC 8A at 115V, 4A at 240V 60/50 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 24A 15A 42A 0.5A 3A 550W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 6 (Modular) 4-Pin Molex Connectors: 4 (Modular) 6+2 Pin PCI-e Connectors: 2 (Modular) Floppy Drive Connectors: 1 (Modular) Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 100-240 VAC Input Current: 8A at 115V, 4A at 240V Input Frequency Range: 60/50 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 82% MTBF: 100, 000 Hours Protection: OVP / UVP/ OTP / OCP/ OLP/ OPP/ SCP Power: 550W Operation Temperature: 0-45&194;&176;C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified
...

X-Viper Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here Key Features Support - Compliance with newest Intel standard ATX 12V, V2.2, V2.91, EPS12V Efficiency - 85% at typical MTBF > 100, 000 hrs Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter - for electromagnetic protection 80 Plus Bronze Certified - 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 110V~240V 9A at 110V, 4.5A at 240V 50/60 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 25A 25A 52A 0.8A 3A 650W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 6 4-Pin Molex Connectors: 4 6+2 Pin PCI-e Connectors: 2 Floppy Drive Connectors: 1 Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 110V~240V Input Current: 9A at 110V, 4.5A at 240V Input Frequency Range: 50/60 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 85% Typically MTBF: > 100, 000 Hours Protection: OVP/UVP/OPP/OTP/SCP Power: 650W Operation Temperature: 0~50&194;&176;C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified
...

X-Viper Modular Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here With the addition of the modular version of the X-Viper Series, this allows for greater flexibility, due to you being able to use only the cables required for your PC. This will also help to reduce clutter in your PC & aid in your cooling efforts. Key Features Support - Compliance with newest Intel standards ATX 12V, V2.2, V2.91, EPS12V Efficiency - 85% at typical MTBF > 100, 000 hrs Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Smart Modularized Cable Management for better airflow by reducing cable clutter within built system & increasing heat removal Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter - for electromagnetic protection 80 Plus Bronze Certified - 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 100-240 VAC 9A at 115V, 4.5A at 240V 60/50 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 25A 25A 52A 0.8A 3A 650W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 6 (Modular) 4-Pin Molex Connectors: 4 (Modular) 6+2 Pin PCI-e Connectors: 2 (Modular) Floppy Drive Connectors: 1 (Modular) Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 100-240 VAC Input Current: 9A at 115V, 4.5A at 240V Input Frequency Range: 60/50 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 82% MTBF: > 100, 000 Hours Protection: OVP / UVP/ OTP / OCP/ OLP/ OPP/ SCP Power: 650W Operation Temperature: 0-45&194;&176;C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified
...

X-Viper Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here Key Features Support - Compliance with newest Intel standard ATX 12V, V2.2, V2.91, EPS12V Efficiency - 85% at typical MTBF > 100, 000 hrs Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter - for electromagnetic protection 80 Plus Bronze Certified - 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 110V~240V 10A at 110V, 5A at 240V 50/60 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 25A 25A 60A 0.8A 3A 750W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 9 4-Pin Molex Connectors: 5 6+2 Pin PCI-e Connectors: 4 Floppy Drive Connectors: 1 Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 110V~240V Input Current: 10A at 110V, 5A at 240V Input Frequency Range: 50/60 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 85% Typically MTBF: > 100, 000 Hours Protection: OVP/UVP/OPP/OTP/SCP Power: 750W Operation Temperature: 0~50&194;&176;C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified
...

X-Viper Modular Series Powercool is Proud to announce the launch of its Ultra-silent X-Viper Series, which contains an ultra-silent " Fluid Dynamic Bearing" (FDB) fan as its major cooling component. FDB fans offer better airflow, allowing for better ventilation. The average FDB fan has a long lifespan (100K hrs.), whilst staying virtually silent for more than 2 years. 80 Plus Bronze The X-Viper Series has been awarded the 80+ Bronze certificate across the range, & is also ERP Lot 6 ready (+5VSB consumption < 1W). The single +12V rail on the X-Viper Series allows the use of high end graphics cards, whilst giving greater stability to your PC. See the 80 Plus Bronze Certification Link Here With the addition of the modular version of the X-Viper Series, this allows for greater flexibility, due to you being able to use only the cables required for your PC. This will also help to reduce clutter in your PC & aid in your cooling efforts. Key Features Support - Compliance with newest Intel standards ATX 12V, V2.2, V2.91, EPS12V Efficiency - 85% at typical MTBF > 100, 000 hrs Cooling System - Smart brand new 140cm Fluid Dynamic Bearing (FDB) Fan with intelligent Fan Control (800RPM ~1500RPM) Protection - Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP) & Short Circuit Protection (SCP) St&-by mode consumption < 1W meets U.S.A Energy Standards/ Eu P (Energy-using Products) instructions. Smart Modularized Cable Management for better airflow by reducing cable clutter within built system & increasing heat removal Key Components - The X-Viper uses Taiwanese-Manufactured Major Components for better quality & steady electrical support. Double EMI Filter - for electromagnetic protection 80 Plus Bronze Certified - 80 Plus Bronze Certification Link PSU Specifications AC INPUT: 100-240 VAC 10A at 115V, 5A at 240V 60/50 Hz DC Output Max +3.3V +5V +12V1 -12V +5VSB 25A 25A 60A 0.8A 3A 750W Connectors 20+4 Pin Main Connectors: 1 4+4 Pin 12V Connectors: 1 SATA Connectors: 9 (Modular) 4-Pin Molex Connectors: 5 (Modular) 6+2 Pin PCI-e Connectors: 4 (Modular) Floppy Drive Connectors: 1 (Modular) Detailed Specifications Dimensions: 158mm x 86mm x 150mm (W x H x D) Input Voltage: 100-240 VAC Input Current: 10A at 115V, 5A at 240V Input Frequency Range: 60/50 Hz PFC: Active PFC (>.99) Power Good Signal: 100-500 ms Hold Up Time: >17ms Efficiency: 82% MTBF: > 100, 000 Hours Protection: OVP / UVP/ OTP / OCP/ OLP/ OPP/ SCP Power: 750W Operation Temperature: 0-45&194;&176;C Safety: CE / FCC / UL / TUV Cooling: 140mm Fluid Dynamic Bearing fan Noise: < 21 d BA 80 Plus Certified: Yes
- 80 Plus Bronze Certification: n Vidia SLi Certified ATi Crossfire Certified
...