Phobya Y-adaptor 4 Pin Molex to 4x 3 Pin (12V) 30cm
- black An extension for a PWM connector (4 Pin). As fan control via the Mainboard
...

Phobya Y-cable 8 Pin socket to 2x 8 Pin plug
- black A Y-cable for distribution of the VGA or Maonboard power connector on the
...

Phobya DC12-220 12 Volt Pump The new pumps by phobya stir up the watercooling market! Very quiet, extremely powerful, compact & with a long lifespan: This is the first pump generation by Phobya. Especially when considering the price this pump is truly a great option for your watercooling system! The continuously growing portfolio of accessories in addition increases the possibilities of use & mounting varieties! Technical specifications: Nominal voltage: DC 12V +/-10% Starting voltage: 8V & above Power consumption: 6.5W +/- 10% Current draw: 0.62A +/-10% Max. flow: 400 l/h +/-10% Pressure head: 2.2m +/-10% Dimensions: 52 x 45 x 50mm Lifespan: 50.000 hrs at 25°C Noise emissions: 17.2 d B ...

Phobya DC12-260 12 Volt Pump The new Phobya pumps: A revolution begins! After the first products the manufacturer consortium Phobya now introduces a pump series which rattles the cages in the performance-pump sector. This product perfectly combines all the requirements from different watercooling users: Quiet: At less than 22d B even most fans in the system emit more noise. For decoupling & therefore further noise reduction two kits are included with the pump: The first a map for quick & easy mounting on the case floor. The mat is self-adhesive on both sides & therefore reliably fixates the pump. The second possibility for pump installation are two brackets with which the pump can be fixated in the case. A ceramic-based centrifugal bearing promises quiet operation & a long lifespan. Compact: With the small outer

Dimensions (see technical specifications) the pump can be installed in almost any corner of the case, even in Midi- or Mini-towers. The compact

Dimensions of the pump also make connection to the cooling loop easy as the pump's position can easily be varied. Powerful: Such a small & quiet pump so far always required compromises regarding the power. Not anymore! 2, 6m of pressure head & 600l/h of flow are the kind of performance that will not be stopped even by cooling loops even with multiple waterblocks. G1/4" connection: No adaptors, no annoyingly long connectors any more! Simply screw in the desired connector & you are set to go! 12V connector: The first advantage of a 12V connector is that it makes the connection with a 230V cable obsolete & that internal operation is made safe & easy. The other great feature of this pump is the connector: It is not a standard 4-Pin Molex connector, it is a 3-Pin fan connector which powers this pump (Important: Check the requirements & capabilities of the sockets to which you connect the pump). This pump can therefore be operated at a fan connector on a Mainboard or a fan controller. This also allows a speed reduction of the pump: Only 8V are required for starting & operation of the pump which makes it in addition quiet & smooth in operation. The fan connector also offers the advantage of rpm monitoring with a compatible controller. Technical specifications:
Colour: Black Casing

Material: Plastic Outer dimensions: (L x W x H): 61, 7 x 59, 7 x 46, 7mm Connection thread

Size: G1/4" Power connector: 3-Pin Nominal operating voltage: DC 12V Starting voltage: DC 8V Power consumption: 8W Current draw: 1A Max. pressure head: 2, 6m Flow rate: 600 l/h Lifespan: 50.000hrs Noise emission: below 22 db








...

Phobya DC12-400 12 Volt Pump The new Phobya pumps: A revolution begins! After the first products the manufacturer consortium Phobya now introduces a pump series which rattles the cages in the performance-pump sector. This product perfectly combines all the requirements from different watercooling users: Quiet: At less than 25d B even most fans in the system emit more noise. For decoupling & therefore further noise reduction two kits are included with the pump: The first a map for quick & easy mounting on the case floor. The mat is self-adhesive on both sides & therefore reliably fixates the pump. The second possibility for pump installation are two brackets with which the pump can be fixated in the case. A ceramic-based centrifugal bearing promises quiet operation & a long lifespan. Compact: With the small outer

Dimensions (see technical specifications) the pump can be installed in almost any corner of the case, even in Midi- or Mini-towers. The compact

Dimensions of the pump also make connection to the cooling loop easy as the pump's position can easily be varied. Powerful: Such a small & quiet pump so far always required compromises regarding the power. Not anymore! 4m of pressure head & 800l/h of flow are the kind of performance that will not be stopped even by cooling loops even with multiple waterblocks. G1/4" connection: No adaptors, no annoyingly long connectors any more! Simply screw in the desired connector & you are set to go! 12V connector: The first advantage of a 12V connector is that it makes the connection with a 230V cable obsolete & that internal operation is made safe & easy. The other great feature of this pump is the connector: It is not a standard 4-Pin Molex connector, it is a 3-Pin fan connector which powers this pump (Important: Check the requirements & capabilities of the sockets to which you connect the pump). This pump can therefore be operated at a fan connector on a Mainboard or a fan controller. This also allows a speed reduction of the pump: Only 8V are required for starting & operation of the pump which makes it in addition quiet & smooth in operation. The fan connector also offers the advantage of rpm monitoring with a compatible controller. Technical specifications:
Colour: Black Casing

Material: Plastic Outer dimensions: (L x W x H): 75 x 66 x 54mm Connection thread

Size: G1/4" Power connector: 3-Pin Nominal operating voltage: DC 12V Starting voltage: DC 8V Power consumption: 18W Current draw: 1.8A Max. pressure head: 4m Flow rate: 800 l/h Lifespan: 50.000hrs Noise emission: below 25 db








...

Phobya High Density 120cm blue (144x SMD LED's) LED-Flexlight The ultimate modding highlight! Make your PC true eye-candy! With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy & hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption & barely any heat dissipation. in addition the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look! The great quality of manufacturing & advanced technology makes Flexlights the ultimate lighting solution! Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours! New generation: The combination of the Tri Bright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems. Flexlights outside of the PC? Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. Technical specifications: Length: 120cm

Colour: Blue

Width: 10mm (strip only) Number of LEDs: 144 Voltage: 12VDC to 14VDC Connector: 4-Pin Molex



...

Phobya High Density 120cm green (144x SMD LED's) LED-Flexlight The ultimate modding highlight! Make your PC true eye-candy! With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy & hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption & barely any heat dissipation. in addition the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look! The great quality of manufacturing & advanced technology makes Flexlights the ultimate lighting solution! Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours! New generation: The combination of the Tri Bright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems. Flexlights outside of the PC? Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. Technical specifications: Length: 120cm

Colour: Green

Width: 10mm (strip only) Number of LEDs: 144 Voltage: 12VDC to 14VDC Connector: 4-Pin Molex



...

Phobya High Density 120cm red (144x SMD LED's) LED-Flexlight The ultimate modding highlight! Make your PC true eye-candy! With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy & hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption & barely any heat dissipation. in addition the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look! The great quality of manufacturing & advanced technology makes Flexlights the ultimate lighting solution! Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours! New generation: The combination of the Tri Bright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems. Flexlights outside of the PC? Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. Technical specifications: Length: 120cm

Colour: Red

Width: 10mm (strip only) Number of LEDs: 144 Voltage: 12VDC to 14VDC Connector: 4-Pin Molex



...

Phobya High Density 120cm RGB (72x SMD LED's) LED-Flexlight The ultimate modding highlight! Make your PC true eye-candy! With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy & hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption & barely any heat dissipation. in addition the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look! The great quality of manufacturing & advanced technology makes Flexlights the ultimate lighting solution! Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours! New generation: The combination of the Tri Bright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems. Flexlights outside of the PC? Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. RGB These three letters stand for red, green & blue. With these base colour LEDs virtually all colours of the rainbow can be mixed. With the right controller unit (not included, optionally available with the Item No. 83156) even more effects can be achieved. More details can be found in the item description of the Phobya LED Flexlight RGB controller & remote control. Technical specifications: Length: 120cm

Colour: RGB

Width: 10mm (strip only) Number of LEDs: 72 Voltage: 12VDC to 14VDC



...

Phobya High Density 30cm RGB LED-Flexlight The ultimate modding highlight! Make your PC true eye-candy! With the use of the Phobya Flexlight strip it is now possible to shine a light into every corner of your enclosure with even more LEDs! The 4-Pin Molex extension loops through the required energy & hence still allows use of the PSU connector. For mounting the pre-applied adhesive tape at the back of the strips. Hence mounting of the Flexlights is easy to do in any spot in the enclosure. Many possibilities allow many different lighting effects: At the in- or outside of the enclosure, wrapped around the reservoir or simply put at the base of the enclosure. Thanks to the LED technology the Flexlights have an extremely low power consumption & barely any heat dissipation. in addition the Flexlight strip is watertight, giving many new possibilities in combination with a water cooling system. The Flexlights can even be hung into a reservoir for a completely new look! The great quality of manufacturing & advanced technology makes Flexlights the ultimate lighting solution! Of course shortening of the Flexlight strips is possible without problems, simply cut them to the desired length! Please note that the cut should only be made at the cut marks (every third LED), as the last LEDs will not functions otherwise. Even extension is possible for users with soldering experience. This even allows combination of Flexlights in different colours! New generation: The combination of the Tri Bright technology in combination with the closely spaced high-density LEDs allows extreme lighting power! Beautifully black sleeved allow this component to be integrated cleanly into high-end systems. Flexlights outside of the PC? Of course! Use Flexlights to illuminate a table from the bottom, a couch from the rear or even a photo frame! All of these beautiful possibilities can be realized with the Phobya external power supplies: No PC is required, no noisy fans are disturbing the silence. Simply order one of the Phobya PSUs (Item No. 84006 or 84011) & enter the world of endless lighting possibilities! RGB These three letters stand for red, green & blue. With these base colour LEDs virtually all colours of the rainbow can be mixed. With the right controller unit (not included, optionally available with the Item No. 83156) even more effects can be achieved. More details can be found in the item description of the Phobya LED Flexlight RGB controller & remote control. Technical specifications: Length: 30cm

Colour: RGB

Width: 10mm (strip only) Number of LEDs: 18 Voltage: 12VDC to 14VDC



...