Interfit Heavy Duty Light Stand COR753 The COR753 light stand is aluminium, extends to 118" & has 4 sections, with sure-twist section locks. If you forget to tighten any section with your light mounted, the light slowly descends, thanks to the air-cushioning of this st&. This useful feature saves equipment, & fingers from harm during busy photo sessions. These high quality Air-Damped lighting stands are manufactured from high-grade aluminium with strong nylon fittings & collars, Solid brass head fittings give a secure grip for Interfit lighting heads. COR 750 & COR751 Stands are standard equipment in Interfit lighting kits Recommended for use with Interfit Giant Collapsible backgrounds. Max

Height: 394cm (155"). Min

Height: 128cm (50.5"). Folded: 113cm (44.5").



...

Interfit Combi Boom Arm Stand COR754 The Interfit 5 section stand with a built-in boom arm. When used as a conventional stand it extends up to a height of 13 (4 m). The boom arm also has provision for a weight (not included) to be added to counterbalance the attached lighting head or reflector when the arm is extended. A built-in joint allows its top two sections to be converted to a boom arm with a 5 (1.5 m) extension. Its spring clips can hold your reflector disc in place, & the centre pivot joint allows angle adjustment of the disc. These high quality Air-Damped lighting stands are manufactured from high-grade aluminium with strong nylon fittings & collars, Solid brass head fittings give a secure grip for Interfit lighting heads. COR 750 & COR751 Stands are standard equipment in Interfit lighting kits Max

Height: 250cm (99") Min

Height: 120cm (47.5"). Folded: 77cm (30"). Sections: Stand 3, Boom 2.



...

Interfit Floor Stand COR758. This three section floor stand enables you to put a flash at low levels on the background, it can also be used as medium sized stand for lower levels. The floor stand comes with an additional brass stud. The 2-section riser is removable. These high quality Air-Damped lighting stands are manufactured from high-grade aluminium with strong nylon fittings & collars, Solid brass head fittings give a secure grip for Interfit lighting heads. COR 750 & COR751 Stands are standard equipment in Interfit lighting kits. Max

Height: 100 cm. (39"). Min

Height: 11 cm. (4.25"). Folded: 43 cm. (17").



...

Interfit Compact Background Stand COR759. New compact lighting stand ideal to be used as a background light positioned behind the subject. These high quality Air-Damped lighting stands are manufactured from high-grade aluminium with strong nylon fittings & collars, Solid brass head fittings give a secure grip for Interfit lighting heads. COR 750 & COR751 Stands are standard equipment in Interfit lighting kits.

Size: Folded 46 cm. (18"). Extends to 82 cm. (32"). Foot Print 53 cm. (21").

...

Ideal for holding large or small. Interfit muslin backgrounds for the photographer on the move, the telescopic pole can be adjusted to allow the background support system to be made narrower when space is not available to the photographer. Supplied with: 2 x stands. 1 x telescopic cross pole. 1 x bag. Specification: COR760 (Small). Height 94". Width 98". COR761 (Large). Height 102". Width 124". ...

Ideal for mounting paper or vinyl rolls for the mobile studio photographer where a standard background support system would not be practical. The Portaprop set simple push fits between the floor & ceiling being locked into place by the vertical bars of the kit. The background rolls are held in place via the expan clamps which feed into the standard tubes of the background. The kit is able to hold up to three rolls at any one time allowing a quick & convenient change over of colours to be used. Minimum grip on paper roll core is 52 mm. Maximum grip on paper roll core is 75 mm. Maximum height 3.3 mtrs 11 feet. Supplied with: 2 x Portaprop. 2 x Hanger Systems. 2 x Brake Expans. 2 x Chain & Weights. ...

Interfit Diffuser Beauty Dish for EX/EXD 27" (70 cm) INT249 with white interior is used predominately in fashion & beauty photography for the direct (but not harsh) light & the luminous, buttery skin tone quality that it can create, as well as the elegant round catch light it produces in the subjects e: Yes. This beauty dish will mount directly to any EX/EXD mount flash head. An optional honeycomb grid is available for more controlled lighting. ...

Interfit Diffuser Beauty Dish for Stellar/ Venus 27" (70 cm) INT259 for S Mount Heads will deliver a direct, but not harsh light thats in great demand for beauty & portrait photography. This beauty dish has a diameter of 27" (70 cm) & is designed to be used with S-type bayonet mount heads, including the Interfit Pro, Stellar, Stellar X, EX, Extreme & Venus heads. the RF5007 Honeycomb is designed to fit the rim of the INT259 sold separately. ...

Interfit Twin Head EX150 Mark II Studio Flash Kit INT182. The Interfit EX150 MKII has been built from the ground up combining many of the features of the multiple award winning EX150 introduced in 2005. Each MKII EX150 has more power then its predecessor & a re-designed polycarbonate body. Easy access to the controls ensures you can set just the right amount of light on your subject. Easy access to the controls ensures you can set just the right amount of light on your subject. Each head features user changeable flash tubes, switchable modelling lamps & Built in Infrared sensor add to ease of use. The kit comes with a specially commissioned educational & training DVD to show just how easy studio lighting can be for first time users. The DVD is full of useful tips on how to set up the kit ensuring you can expand your creativity. Supplied Complete with: 2 x EX150 MKII Heads with Reflectors. 2 x 75w Bulbs (INT038). 2 x Air-cushioned lighting Stands (COR750). 1 x 60 cm. (24") Softbox (INT211). 1 x Translucent 36" Umbrella (INT260). 2 x Sync & Power leads (CIA330). 1 x Educational DVD. ...

Interfits new EX300 combines all the features of the multiple award winning EX150 MKII with more power & the addition of fan cooling for constant & reliable service in a larger polycarbonate body. The EX300 has an intuitive rear control panel which provides step-less adjustment of flash & modelling lamp power levels over a 4 stop range. User-friendly push button controls & switches allow the choice of audible or silent recycling as well as proportional or full power modelling lamp settings. The lamp & the flash tube are conveniently user-replaceable. Fan cooling ensures that the flash capacitors & associated circuitry are at optimal working temperature even during periods of prolonged use. The rapid 1.5 second recycling time ensures that youll be ready to catch every fleeting gesture, a quality especially valuable in portraiture or fashion. Versatility drives the design of the EX300, which features wired sync, wireless IR & optical flash triggering. Supplied with: 2 x EX300 heads, 2 x 100 watt Bulbs (INT499), 2 x Lighting stands (COR751), 1 x 60cm (24"), Softbox (INT211), 1 x Translucent Umbrella (INT260), 2 x Sync & power leads (CIA332). All in one carry bag included. ...