The HPE SATA optical drive for HP Pro Liant servers is offered with an industry-standard SATA interface & is supported on most major operating systems. The DVD ROM drive is designed to read not only CD ROM & CD R/RW discs but also DVD ROM, DVD RAM, DVD +R/RW & DVD R/RW discs. ...

The Electronic HPE Care Pack Services (e-Care Pack) capability means that you can order, receive, update, & activate a wide range of valuable HPE Care Pack Services over the Internet. Administered through the HPE Services Network (CSN), it is a fast & simple process that enables immediate registration & service activation. This service helps ensure that your new HPE hardware or software is installed smoothly, efficiently, & with minimal disruption of your IT & business operations. Choose HPE Installation Service when you need to cost-effectively obtain specialized expertise for a complex, one-time task; enjoy top performance right from the start; shorten your time-to-ROI. ...

The Electronic HPE Care Pack Services (e-Care Pack) capability means that you can order, receive, update, & activate a wide range of valuable HPE Care Pack Services over the Internet. Administered through the HPE Services Network (CSN), it is a fast & simple process that enables immediate registration & service activation. HPE 24x 7 Software Technical Support provides comprehensive round-the-clock services & cost-saving updates to help you enhance the performance & availability of software from HPE & other leading vendors. This convenient service gives your IT team direct access to HPE IT Response Centers. Experienced Response Center engineers provide trustworthy advice on issues such as software features & use, problem diagnosis & resolution, & software defect identification. Any member of your IT staff can electronically access essential product & support information. In addition, 24x 7 Software Technical Support brings you software updates at substantial subscription savings. This

Includes:: new versions of HP & selected third-party software products, patches, & documentation, as well as licensing to use & copy these versions. Choose 24x 7 Software Technical Support when you need to improve the productivity of system managers & operators, improve system performance & reduce downtime due to software defects, expedite problem resolution through expert-level technical resources available whenever you need them, enjoy consistent service coverage across geographically dispersed sites, update HPE & selected third-party software at a predictable cost, take advantage of subscription savings on software updates & keep your license compliancy up-to-date.

...

The HPE 332T is a dual-port, low-cost, low profile 1 Gb adapter featuring the BCM5720 Broadcom single-chip solution in a PCIe 2.0 compliant form factor designed for select HPE Pro Liant Gen 8 & Gen 7 ML/DL/SL servers. It delivers full line-rate performance across all ports with low power consumption, providing Ethernet connectivity ideal for virtualization, security, server consolidation, & network segmentation. Supported advanced features include large send & receive offload capability, TCP checksum & segmentation, VLAN tagging, MSI-X, jumbo frames, IEEE 1588 (Precision Time Protocol
- PTP), & virtualization features such as VMware Net Queue & Microsoft Virtual Machine Queue (VMQ). Support for HP Sea of Sensors 3D technology enhances server performance while reducing energy use & expense.
...

The HPE 361T PCIe Dual Port Gigabit NIC is a high performance PCI Express (PCIe) Gen 2.1 dual port, copper, gigabit network solution for HPE Z-Workstation customers who demand the latest in dual port Gigabit Ethernet bandwidth & features. It offers two ports on a single PCI Express adapter, allowing customers to save valuable I/O slots for other uses. The 361T

Includes:: support for Wake-on-LAN (WOL). Pre-Boot Execution environment (PXE) is disabled as a default. in addition, it ships with support for Jumbo Frames, Network Fault Tolerance, Load Balancing, & various offload capabilities such as Segmentation Offload & Large Send Offload (LSO) that offer further network throughput improvements. in addition, it is easy to install in either standard or low profile slots with support for IPv 6 packet transmit & receive. 361T offers support for the latest power management technologies such as Energy Efficient Ethernet (EEE) & DMA Coalescing. This latest dual-port adapter comes with IEEE 1588 Precision Time Stamping feature.

...

This device, targeted at extreme operation environments or local boot, brings the reliability of solid state technology, lower power & faster reads than traditional rotating drives. It delivers higher performance, lower latency & low power solutions when compared with traditional rotating media & fits seamlessly into the existing HP server infrastructure. ...

The HPE 530SFP+ is a dual-port 10 Gb Ethernet adapter featuring the next generation BCM57810S single-chip solution from Broadcom in a PCIe 2.0 compliant form factor designed for select HPE Pro Liant Gen 8 & Gen 7 ML/DL/SL servers. The HPE 530SFP supports enterprise class features such as VLAN tagging, adaptive interrupt coalescing, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, PXE boot & virtualization features such as VMware Net Queue & Microsoft VMQ. Support for HPE Sea of Sensors 3D technology enhances server performance while reducing energy use & expense. ...

The HPE Ethernet 10 Gb 2-port 560SFP+ Adapter features the latest Intel 82599 controller. It is a low-cost, low-power dual port PCIe v 2.0 x 8 adapter designed for HPE Pro Liant Gen 8 & select G7 ML/DL/SL servers. The HPE 560SFP+ addresses the demanding needs of the next-generation data center by providing unmatched features for virtualization & scalability that complement the HPE Gen 8 server platform. The HPE 560SFP+ comes with both low profile & standard brackets & has two SFP+ cages that enable connections with DACs as well as SR fiber optic modules. It is SR-IOV ready & supports high performance networking features such as VLAN tagging, low latency interrupts, TCP & UDP checksum offloading, MSI-X, NIC teaming (bonding), Receive Side Scaling (RSS), jumbo frames, & PXE boot. ...

The HP Ethernet 1 Gb 4-port 331FLR offering in a single chip solution on a flexible LOM form factor, further reducing power requirements for 4 ports of 1 Gb Ethernet. It is designed for use with select HP Pro Liant Gen 8 Rack servers. The HP 331FLR quad-port Flex LOM delivers full line-rate performance across all ports with low power consumption. The HP 331FLR quad-port design is ideal for server virtualization, security, server consolidation, network segmentation, and other applications requiring maximum throughput & port density. The total aggregate throughput of 4 Gb meets the needs for customers desiring high bandwidth. ...

The HPE 366M is a PCIe 2.1 quad-port 1 Gb Ethernet mezzanine network adapter for select HP Pro Liant Blade System c-Class Gen 8 servers. The total aggregate throughput of 4 Gbps meets the needs of customers wanting high bandwidth but not yet ready to move to 10 Gigabit Ethernet. Other features supported on the HPE 366M include RSS, PXE, checksum offload, VLAN, jumbo frames, i SCSI acceleration & i SCSI remote boot. ...