Backed by HPE's unique & exhaustive media selection process, C7972A HPE Ultrium 400GB data cartridges support the HPE Storage Works 460 tape drive. HPE Ultrium 2 tapes merge low cost of ownership with exceptional reliability & performance. Supports the latest HPE Storage Works Ultrium 460 tape drive, incorporating new Ultrium 2 format. Increases capacity with 200GB native storage on a single Ultrium 2 format cartridge. Lowers the cost of ownership for corporate & enterprise data centres with the best cost per GB ratio of any product in its class. ...

Third generation HPE Ultrium 800GB RW Data Cartridge offers the highest capacity & best cost per GB of any tape technology available, re-inforced by the HPE Brand

Specification – the industry’s most demanding media quality standard. Exhaustively tested, HPE LTO Ultrium cartridges meet all your demands for maximum reliability when restoring data, offering high storage density, ease of management & scalable storage & backup performance. Covering five generations of capacity
- LTO-1 (200 GB), LTO-2 (400 GB), LTO-3 (800 GB), LTO-4 (1.6 TB) & LTO-5 (3 TB) – & with transfer speeds of up to 1 TB/hr for LTO-5, there is a platform for every need & budget. From LTO-3 onwards, LTO Ultrium WORM cartridges enable the creation of compliant, permanent & tamperproof archives. From LTO-4 onwards, secure AES-256 encryption provides even higher levels of data security & compliance with the most stringent industry regulations to prevent unauthorized data access. From LTO-5 onwards, LTO Ultrium Linear Tape File System makes using tape as easy, flexible, portable & intuitive as using other removable & sharable media, such as a USB (Universal Serial Bus) drive. Features Highest capacity & performance of any tape technology
- 800 GB capacity & 160 MB/sec transfer rate. Write Once Read Many (WORM) option LTO Ultrium cartridge memory chip delivers faster access time & enhanced media monitoring. First time restore ensured with fewer media failures & disrupted backups, regardless of duty cycle or environmental conditions. Smoother basefilm & smaller magnetic particles increase bit density, allowing more data in the same amount of tape. This increases the number of recording tracks from 512 for Ultrium 2, to 706 for third generation HPE Ultrium 800GB cartridges. Increased margin between Early Warning End of Media (EWEOM) & End of Media (EOM), which means data on a full tape will fit on to the destination tape when copying tapes. uperior 'smart grabber' mechanism & mechanical interlock to prevent the leader pin from being pulled inside the tape housing. Sensors detect proper connection & prevent leader loss that would ruin the tape. Simplified tape path to reduce wear & tear & build up of & debris (important in automation). HPE brand qualification test procedures (load/unload, shoeshine, drop testing & environmental stress testing) go far beyond what is required for the LTO Ultrium logo. This ensures maximum reliability for restoring your data. HPE warrants LTO Ultrium cartridges for up to 30 years archival life and/or 260 full backups. This ensures businesses can meet the ever-increasing demands of regulation for data retention & archiving. Write-Once-Read-Many (WORM) version provides tamperproof, compliant data storage.



...

With HPE Non-Custom Labeled LTO Ultrium media, you no longer have to label your own cartridges, saving you time & the risk of retrieval errors. Barcode sequences are unique to each batch ordered – no codes are repeated. HPE rigorously tests its precision-engineered, high-resolution barcode labels using software unique to the HPE Automation Group to evaluate & warrant the performance of its labels in demanding, split-second datacenter environments. These labels are professionally applied in a clean environment to ensuring 100% readability accurate storage. Non-Custom Labeled cartridges ensure 100% label readability & can be ordered online, in packs of 20, using a fast & simple process. For those customer who value the added security that RFID adds, customers have the option to integrate it into each label at minimal cost. The RFID tag is embedded into the back of the non-custom label & offers tracking, audit & security advantages for those with IT asset tracking systems. Features RFID Re-Writable Non-Custom Labeled Media saves your valuable time, Money & Mistakes Manual labeling is a slow, laborious, error-prone process. With custom labeled media, IT staff no longer have to waste hours peeling, sticking & attaching barcode labels to individual cartridges. HPE barcode labels use Tri-Optic products to produce labels that will not peel, distort, reflect or fade. Labels are applied professionally, in a clean, controlled environment to prevent backup disruptions & drive damage. RFID non-custom labels: Operational efficiencies as a result of bulk reading of media & line of sight reading not being necessary RFID non-custom labels: Increases the real time visibility of media so the datacenter can quickly recognize a missing tape & thus reduce a chance of data breaches which can incur heavy fines & brand damage Simple, Fast & Convenient Each 20-pack of labeled tapes follows a sequence for ease of use: predetermined by HPE & guaranteed to be unique No codes are ever repeated. Pre-sequenced media cuts lead times to days because they can be shipped off the shelf, usually within 2-3 working days. HPE Non-Custom Labeled cartridges can be used in any HPE & non-HPE LTO Ultrium, DLT & SDLT drives Excellent value for your money HPE’s Non-Custom Labeled media costs the same as its unlabeled media. RFID non-custom label: provides strong ROI as a result of operational efficiencies ...

Fourth generation HPE Ultrium 1.6 TB RW Data Cartridge combines high capacity, low cost per GB & AES-256 encryption, reinforce by the HPE Brand

Specification – the industry’s most demanding media quality standard. Features Highest capacity & performance of any tape technology – 1.6 TB capacity & 240 MB/sec transfer rate. Smoother base film & smaller magnetic particles increase the bit density, allowing more data to be recorded in the same amount of tape. This has, for example, increased the number of recording tracks from 896 for LTO-4 to 1280 tracks for 5th generation HPE LTO-5 Ultrium 3 TB cartridges. LTO Ultrium cartridge memory chip delivers faster access time & enhanced media monitoring Increased margin between Early Warning End of Media (EWEOM) & End of Media (EOM), which means data on a full tape will fit on to the destination tape when copying tapes. Ultra-reliable Superior 'smart grabber' mechanism & mechanical interlock to prevent the leader pin from being pulled inside the tape housing. Sensors detect proper connection & prevent leader loss that would ruin the tape. Simplified tape path to reduce wear & tear & build up of & debris (important in automation). HPE brand qualification test procedures (load/unload, shoeshine, drop testing & environmental stress testing) go far beyond what is required for the LTO Ultrium logo. This ensures maximum reliability for restoring your data. HPE warrants LTO Ultrium cartridges for up to 30 years archival life and/or 260 full backups. This ensures businesses can meet the ever-increasing demands of regulation for data retention & archiving. Write-Once-Read-Many (WORM) version provides tamperproof, compliant data storage. Data encryption for enhanced data security on HPE LTO-4 & LTO-5 Ultrium. Standardizing on HPE LTO-4 or LTO-5 Ultrium delivers the capacity to meet shrinking backup windows, industry-standard, AES 256-bit encryption (IEEE1619.1), & interchangeable RW or WORM media; without extra space or IT resource overhead. Open standard technology ensures compatibility across product generations & gives you more choice. Cartridges are available as Custom Labeled, Non-Custom Labeled & non-labeled versions to fit with your data centre management criteria HPE warrants Ultrium 1.6 TB RW cartridges for up to 30 years archival life and/or 260 full back ups. This ensures businesses can meet the ever increasing demands of regulation for data retention & archiving.

...

With HPE Non-Custom Labeled LTO Ultrium media, you no longer have to label your own cartridges, saving you time & the risk of retrieval errors. Barcode sequences are unique to each batch ordered – no codes are repeated. HPE rigorously tests its precision-engineered, high-resolution barcode labels using software unique to the HPE Automation Group to evaluate & warrant the performance of its labels in demanding, split-second datacenter environments. These labels are professionally applied in a clean environment to ensuring 100% readability accurate storage. Non-Custom Labeled cartridges ensure 100% label readability & can be ordered online, in packs of 20, using a fast & simple process. For those customer who value the added security that RFID adds, customers have the option to integrate it into each label at minimal cost. The RFID tag is embedded into the back of the non-custom label & offers tracking, audit & security advantages for those with IT asset tracking systems. What's New LTO-5 Ultrium recording technology RFID Re-Writable Non-Custom Labeled Media Features saves your valuable time, Money & Mistakes Manual labeling is a slow, laborious, error-prone process. With custom labeled media, IT staff no longer have to waste hours peeling, sticking & attaching barcode labels to individual cartridges. HPE barcode labels use Tri-Optic products to produce labels that will not peel, distort, reflect or fade. Labels are applied professionally, in a clean, controlled environment to prevent backup disruptions & drive damage. RFID non-custom labels: Operational efficiencies as a result of bulk reading of media & line of sight reading not being necessary RFID non-custom labels: Increases the real time visibility of media so the datacenter can quickly recognize a missing tape & thus reduce a chance of data breaches which can incur heavy fines & brand damage Simple, Fast & Convenient Each 20-pack of labeled tapes follows a sequence for ease of use: predetermined by HPE & guaranteed to be unique No codes are ever repeated. Pre-sequenced media cuts lead times to days because they can be shipped off the shelf, usually within 2-3 working days. HPE Non-Custom Labeled cartridges can be used in any HPE & non-HPE LTO Ultrium, DLT & SDLT drives. Excellent value for your money HPE’s Non-Custom Labeled media costs the same as its unlabeled media. RFID non-custom label: provides strong ROI as a result of operational efficiencies ...

HPE Ultrium tape technology has been designed to deliver exceptional reliability & performance at the lowest cost per GB. The Ultrium format builds on the best of existing technologies; open standards increase innovation & widen customer choice in terms of performance, capacity, & form factor. Backed by HPE's exhaustive media qualification process, HPE Ultrium data cartridges support all HPE Storage Works & non HPE Ultrium tape devices. Assuming 2:1 compression, the latest fourth Generation products minimize interruption to network & SAN backup by being capable of protecting 1TB/hour of data & storing up to 3.0 TB on one piece of media (almost double the capacity of HPE LTO-4 Ultrium tapes). Features The data is written in a serpentine pattern; the tape reverses direction after each set of sixteen tracks is written. LTO Ultrium formats are open standards. This means that data written on any HPE Storage Works LTO Ultrium tape drive for Pro Liant servers, autoloaders, MSL, EML or ESL can be interchanged directly with Ultrium tape drives from other vendors. Superior 'smart grabber' mechanism & mechanical interlock to prevent the leader pin from being pulled inside the tape housing (a key weakness of DLT media). Sensors detect proper connection & prevent leader loss that would ruin the tape. Simplified tape path to reduce wear & tear. Very low media cost per GB. LTO cartridge memory in media to improve access time & provide enhanced media monitoring. Durable cartridge designed to minimize wear & debris (important in automation). Tested to extremes in HPE's media laboratory, to a level of

Specification unique to Hewlett-Packard. Many of the test procedures required for HPE Brand qualification (e.g. load/unload, shoeshine, drop testing & environmental stress testing) are not required for the Ultrium logo. HPE LTO-4 & LTO-5 Ultrium offers data encryption for enhanced data security. HPE's offers both labeled (Custom Labeled & Non-Custom Labeled) & non-labeled data cartridges. Specifications Product Description
- HPE Ultrium RW Data Cartridge LTO Ultrium x 1
- 1.5 TB
- storage media Manufacturer Warranty
- Limited lifetime warranty Features
- Metal Particle (MP) Type
- Storage media
- LTO Ultrium Media Included Qty
- 1 Native Capacity
- 1.5 TB Colour
- Light blue Compressed Capacity
- 3 TB Tape Length
- 846 m Tape Cartridge
- Ultrium 5














...

HPE Ultrium RW Data Cartridge can write or read data at a blistering speed, storing, encrypting & protecting up to 3 TB on a single cartridge, making it the big hitter in large-scale, mission-critical IT environments. Smoother base film & smaller magnetic particles increase the bit density, allowing more data to be recorded in the same amount of tape. LTO Ultrium cartridge memory chip delivers faster access time & enhanced media monitoring. First time restore ensured with fewer media failures & disrupted backups, regardless of duty cycle or environmental conditions. LTO Ultrium cartridge memory chip delivers faster access time & enhanced media monitoring. First time restore ensured with fewer media failures & disrupted backups, regardless of duty cycle or environmental conditions. Features LTO 5 1.5TB (Native)
- 3.0TB (Compressed) Re-Writable 846m Tape Length 30 Years Archival Life Custom Labelled 20 Pack
...

HPE Ultrium tape technology has been designed to deliver exceptional reliability & performance at the lowest cost per GB. The Ultrium format builds on the best of existing technologies; open standards increase innovation & widen customer choice in terms of performance, capacity, & form factor. Backed by HPE's exhaustive media qualification process, HPE Ultrium data cartridges support all HPE Storage & non HPE Ultrium tape devices. Assuming 2:1 compression, the latest fifth Generation products minimize interruption to network & SAN backup by being capable of protecting 1TB/hour of data & storing up to 3.0 TB on one piece of media (almost double the capacity of HPE LTO-4 Ultrium tapes). HPE's Bar Code & RFID Labeled Data Cartridges: HPE sells both Labeled & Unlabeled LTO Ultrium data cartridges for automation customers requiring bar code & RFID labeled storage media. HPE's Custom Bar Code & RFID Labeled Data Cartridges allow customers to place a custom order with HPE & specifically define the exact barcode sequence printed on each label. Customers should expect a longer lead time for custom order processing. HPE Custom Labeled Data Cartridges are sold in 20 packs in the USA & Europe. HPE's Non-Custom Bar Code & RFID Labeled Data Cartridges allow customers to receive labeled data cartridges fast because no customization process is required. These products are perfect for customers that require labeled media but do not need to define the exact sequence printed on each label. Each HP Non-Custom Labeled Data Cartridge will have a unique, pre-defined barcode sequence printed on each label (no duplicate codes). HP's Non-Custom Labeled Data Cartridges are sold in 20 packs & are available worldwide. ...

Exhaustively tested, HPE LTO Ultrium cartridges meet all your demands for maximum reliability when restoring data, offering high storage density, ease of management & scalable storage & backup performance. Covering six generations of capacity: LTO-1 (200 GB) LTO-2 (400 GB) LTO-3 (800 GB) LTO-4 (1.6 TB) LTO-5 (3 TB) LTO-6 (6.25 TB) With transfer speeds of up to 1.4 TB/hr for LTO-6, there is a platform for every need & budget. From LTO-4 onwards, secure AES-256 encryption provides even higher levels of data security & compliance with the most stringent industry regulations to prevent unauthorized data access. From LTO-5 onwards, LTO Ultrium Linear Tape File System makes using tape as easy, flexible, portable & intuitive as using other removable & sharable media, such as a USB (Universal Serial Bus) drive. Features Massive increase in capacity: 108% improvement versus LTO-5 & 290% capacity versus LTO-4. Significant increase in performance
- possible to store 1.4 TB/hr using LTO-6. Built-in AES 256-bit encryption (IEEE1619.1) (LTO-4, LTO-5 & LTO-6)
- granted FIPS140-2 Level 1 certification. Highest Capacity & Performance of any Comparable Tape Technology A 70% increase in the number of tracks has increase the bit density, allowing more data to be recorded in the same amount of tape: from 1, 280 tracks for LTO-5 to 2, 176 tracks for 6th generation HPE LTO-6 Ultrium 6.25 TB cartridges. LTO Ultrium cartridge memory chip delivers faster access time & enhanced media monitoring. First time restore ensured with fewer media failures & disrupted backups, regardless of duty cycle or environmental conditions. Superior 'smart grabber' mechanism & mechanical interlock to prevent the leader pin from being pulled inside the tape housing. Sensors detect proper connection & prevent leader loss that would ruin the tape. Simplified tape path to reduce wear & tear & build up of & debris (important in automation) HPE brand qualification test procedures (load/unload, shoeshine, drop testing & environmental stress testing) go far beyond what is required for the LTO Ultrium logo. This ensures maximum reliability for restoring your data. HPE warrants LTO Ultrium cartridges for up to 30 years archival life. This ensures businesses can meet the ever-increasing demands of regulation for data retention & archiving. Data encryption for enhanced data security on HPE LTO-4, LTO-5 & LTO-6 Ultrium. Compliance with FIPS 140-2 level 1 security standards.

...

With HPE Non-custom Labeled LTO Ultrium media, you no longer have to label your own cartridges, saving you time & the risk of retrieval errors. Barcode sequences are unique to each batch ordered
- no codes are repeated. HPE rigorously tests its precision-engineered, high-resolution barcode labels using software unique to the HPE Automation Group to evaluate & warrant the performance of its labels in demanding, split-second datacenter environments. These labels are professionally applied in a clean environment to ensuring 100% readability accurate storage. Non-Custom Labeled cartridges ensure 100% label readability. For that customer who values the added security that RFID adds, customers have the option to integrate it into each label at minimal cost. HPE LTO-6 Ultrium 6.25TB MP RW Data Cartridge (C7976A) Exhaustively tested, HPE LTO Ultrium cartridges meet all your demands for maximum reliability when restoring data, offering high storage density, ease of management & scalable storage & backup performance. Covering six generations of capacity & with transfer speeds of up to 1.4 TB/hr for LTO-6, there is a platform for every need & budget. Features secure AES-256 encryption which provides even higher levels of data security & compliance with the most stringent industry regulations to prevent unauthorized data access. LTO Ultrium Linear Tape File System makes using tape as easy, flexible, portable & intuitive as using other removable & sharable media, such as a USB (Universal Serial Bus) drive. Features Massive increase in capacity: 108% improvement versus LTO-5 & 290% capacity versus LTO-4. Significant increase in performance
- possible to store 1.4 TB/hr using LTO-6. Built-in AES 256-bit encryption (IEEE1619.1)
- granted FIPS140-2 Level 1 certification Highest Capacity & Performance of any Comparable Tape Technology HPE LTO-6 Ultrium can write or read data at a blistering 1.4 TB/hour, storing, encrypting & protecting up to 3 TB on a single cartridge, making it the big hitter in large-scale, 24x 7, mission-critical IT environments. A 70% increase in the number of tracks has increase the bit density, allowing more data to be recorded in the same amount of tape: from 1, 280 tracks for LTO-5 to 2, 176 tracks for 6th generation HPE LTO-6 Ultrium 6.25 TB cartridges. LTO Ultrium cartridge memory chip delivers faster access time & enhanced media monitoring. First time restore ensured with fewer media failures & disrupted backups, regardless of duty cycle or environmental conditions. Superior 'smart grabber' mechanism & mechanical interlock to prevent the leader pin from being pulled inside the tape housing. Sensors detect proper connection & prevent leader loss that would ruin the tape. Simplified tape path to reduce wear & tear & build up of & debris (important in automation). HPE brand qualification test procedures (load/unload, shoeshine, drop testing & environmental stress testing) go far beyond what is required for the LTO Ultrium logo. This ensures maximum reliability for restoring your data. Designed for the demanding environments of large scale libraries, HPE LTO Ultrium media has a 30 year archival storage life Data encryption for enhanced data security, compliance with FIPS 140-2 level 1 security standards.


...