The DWL-2600AP is an entry level indoor Access Point (AP) designed to meet the business needs of companies of all sizes. Its low profile & sleek design means it can be deployed in a variety of business environments. The AP can work in standalone mode for initial deployment & then augmented by adding D-Link’s Unified Switch solutions like the DWC-1000 Wireless Controller or the advanced DWS-3160/DWS-4026 Unified Switch Series to provide centralised wireless LAN management. High Performance The DWL-2600AP is based on the 802.11n standard & delivers up to 300 Mbps of network throughput. With two internal PIFA antennae working at a 2.4 GHz frequency, this Access Point can homogeneously broadcast on the horizontal plane, making it ideal for ceiling mounting. For mixed wireless environments where 802.11n, 802.11g & 802.11b clients simultaneously access the network, its Radio Protect™ feature ensures all users receive an adequate level of service regardless of their technology. Self-Configuring Cluster Due to its flexible design, the DWL-2600AP can be deployed in a number of ways. Using D-Link's Self-Configuring Cluster, a feature that allows system administrators to automatically replicate the configuration of one Access Point (master AP) across several others, up to eight Access Point can be configured & grouped into a cluster. This is a great solution for small businesses or workgroups that want central management but don't need the advanced features provided by Wireless Controllers or Unified Switches. Unified Management The DWL-2600AP is the entry level Access Point into D-Link's Unified Wireless Solutions Range. The DWL-2600AP also incorporates Power over Ethernet (Po E) making installation simple. D-Link's Unified Switch/ Controller range can easily be added to any existing network infrastructure & be used to centrally manage & power the all Unified Access Points on the network. D-Link's Unified Wireless Solutions Range makes selecting the right product for the job easy, the DWC-1000 Wireless Controller has been designed to manage up to 24 Access Points centrally whilst the DWS-3160 Series of Unified Switches can be used in more complex network topology for deployments that need more advanced features or cover wider areas, requiring support for up to 48 Access Points directly per switch or 192 Access Points in a switch cluster. Security The DWL-2600AP helps system administrators secure their business network with advanced features like 802.1x Authentication & RADIUS support. in addition, this AP supports WPA, WPA2 encryption mechanisms. To further segment the network, up to 16 Virtual Access Points (VAP) can be created allowing the administrator to assign different access privileges to different groups of users. When used together with D-Link’s Wireless Controller or Unified Switches solution, security can be raised to a new level. Rogue APs in the network may be easily detected & the administrator immediately notified of any security threat. Automatic Radio Frequency (RF) Management Wireless networks with multiple Access Points need to be carefully planned to avoid interference & channel overlapping. Thanks to the DWL-2600AP advanced feature it can detect neighbouring Access Points at startup & assess what is the best available channel for it to transmit on. This significantly reduces RF interference & allows the administrator to easily deploy APs more densely. When being controlled by one of D-Link's Unified Wireless Switch/ Controller solutions, the DWL-2600AP will automatically adjust its transmission power to avoid channel overlapping, ensuring that the wireless network always runs at top performance. Quality of Service The DWL-2600AP can avoid network congestion by applying Quality of Service (Qo S) on the wireless network, ensuring that time-sensitive traffic is given priority ahead of the rest of traffic. in addition, the Load Balancing mechanism avoids oversubscription on any Access Point if other APs in the proximity have more resources available. This feature ensures that no single AP is overburdened while nearby APs remain idle 3rd Party Support The DWL-2600AP supports Aeroscout™, a RFID-based location tracking system. Aeroscout™ allows tracking of persons, objects & assets by means of RFID tags which have built-in location capabilities. This is especially useful within healthcare, manufacturing & security sectors. ...

The DWL-6600AP Unified N Dual-band Po E Access Point is a best-in-class indoor access point designed specifically for business-class environments. With high data transmission speeds & access point load balancing, the DWL-6600AP offers high-quality & reliable wireless service. Versatile & powerful, the DWL-6600AP can be flexibly deployed as a standalone wireless access point or as a managed access point controlled by a D-Link Unified Wireless Switch or Wireless Controller. Businesses can start with standalone mode deployment, then migrate to a centrally managed system anytime later. The DWL-6600AP delivers reliable wireless performance with maximum wireless signal rates of up to 300 Mbps in either the 2.4 GHz or 5 GHz mode. Support for Wi-Fi Multimedia™ (WMM) Quality of Service features makes the DWL-6600AP an ideal access point for audio, video, & voice application. In addition, the load balancing feature ensures maximum performance & best service quality in the wireless environment. Ideal for Business Blazing wireless performance of up to 300 Mbps network throughput Self-configuring cluster enables effortless provisioning Up to 32 virtual access points may be created from a single device Automatic load-balancing among neighboring access points Flexible Qo S with WMM ...

The DWL-8610AP Wireless AC1750 Dual-Band Unified Access Point combines the cutting-edge wireless speeds of 802.11ac with the unparalleled flexibility & scalability of D-Link’s Unified Wireless Solution. The DWL-8610 is designed to support small to medium business or enterprise environments by providing network administrators with secure & manageable dual-band wireless network options. Super-fast Wireless AC Performance The DWL-8610AP delivers reliable, high-speed wireless performance using the latest 802.11ac standards with maximum wireless signal rates of up to 450 Mbps over the 2.4 GHz b&, & 1300 Mbps over the 5 GHz band 1. With band steering, the DWL-8610AP detects whether or not the wireless client is dual-band capable & if it is, it will push the client to connect to the less congested 5 GHz 802.11ac/n network. It does this by actively blocking the client’s attempts to associate with the 2.4 GHz network. Band steering can ensure clients on the 5 GHz band can achieve their maximum performance without being bottle-necked by legacy 2.4 GHz 802.11b/g/n clients. This way, you can make the most of Wireless AC technology & at the same time ensure backwards compatibility with existing legacy equipment. AC Smart Beam™ technology enables the DWL-8610AP to have even greater reach than ever before. By focusing the wireless signal at connected devices, it guarantees continuous fast wireless speeds, anywhere in the office, even under heavy network utilisation or in area that had bad wireless signal Self-Configuring Cluster For small businesses that need to deploy multiple APs but lack the resources to tackle the complicated task of network management, the DWL-8610AP’s self-configuring cluster feature offers the ideal solution. When a small number of DWL-8610 A Ps are deployed on the network, they may be configured to form a self-configuring cluster. Once the administrator configures one access point, the same configuration can then be applied to all remaining APs. Up to 16 APs may be used to form a cluster, making setting up your business wireless network a breeze. Centrally Manage your Wireless Network When working in conjunction with a D-Link Unified Switch or Wireless Controller, the DWL-8610AP, like other D-Link Unified Access Points, may be centrally managed. This allows up to 192 D-Link Unified Access Points to be deployed & managed easily & efficiently. Once the APs are discovered by the switch/controller, the administrator can push specific a set of configurations onto them, rather than having to do so one by one. In addition, RF resource management & security are also managed centrally, thus allowing the administrator to pre-emptively identify potential deficiencies & weaknesses in the network. Automatic RF Management Saves Power & Money When a number of access points are deployed close to each other, interference may result if proper RF management isn’t implemented. When a DWL-8610AP senses a neighbour nearby, it will automatically select a non-interfering channel. This greatly reduces RF interference & will allow the administrator to deploy APs more densely. To further minimise interference, when a nearby AP is operating on the same channel, the DWL-8610AP will automatically lower its transmission power 2. When, for whatever reason, the nearby AP is no longer present, the DWL-8610AP will increase its transmission power to expand coverage. Quality of Service for Increased Connectivity The DWL-8610AP supports 802.1p Quality of Service (Qo S) for enhanced throughput & better performance of time-sensitive traffic like Vo IP & streaming DSCP. The DWL-8610AP is WMM-certified, so in the event of network congestion, time-sensitive traffic can be given priority ahead of other traffic. Furthermore, when a number of DWL-8610 A Ps are in close proximity with each other, an access point will refuse new association requests once its resources are fully utilised. Instead, the association request will be picked up by a neighbouring unit. This feature ensures that no single AP is overburdened while others nearby sit idle. Security The DWL-8610AP supports the latest standards in Wi-Fi security, including WEP, WPA, WPA2, & 802.1X. In addition, it supports up to 16 Virtual Access Points (VAP) per radio, for a total of 32 VAPs, which allows the administrator to assign different access privileges to different groups of users. When Station Isolation is enabled, the AP blocks communication between wireless clients on the same radio & VAP. Rogue APs in the network can be easily detected, & the administrator will be immediately notified of any security threat. When used together with D-Link’s Wireless Controller or Unified Switch, the security can be enhanced further. Convenient Installation With an embedded antenna & a simple housing, the DWL-8610AP can be installed on a wall or ceiling & blends in with most office environments. Enclosed in a plenum-rated chassis, the DWL-8610AP adheres to strict fire regulations for placement in air passageways. For easy installation, it has integrated 802.3at Power over Ethernet (Po E) support, allowing installation of this device in areas where power outlets are not readily available. ...

Product Details D-Link, an industry leader in networking, introduces the DWL-P200 Power over Ethernet (Po E) Adapter. The DWL-P200 delivers both data & electrical power to Ethernet-enabled devices using a single Ethernet cable. Using Power over Ethernet, you eliminate the need to place an Ethernet-enabled device, such as a wireless access point, near a power outlet, giving you more freedom in placement. The DWL-P200 Power over Ethernet (Po E) Adapter is simple to install, requiring no tools & no software. Its compact size makes implementation of the DWL-P200 easy. Plug the base unit into a power outlet, & then connect the terminal unit to your network device using any standard Ethernet cable. Once set up, the terminal device unit can output power to any compatible 5V or 12V Ethernet-enabled device. The DWL-P200 simplifies your installation of Ethernet-enabled devices, such as an Internet camera or wireless access points, by allowing you to place it beyond the range of standard power outlets. You can now mount these devices to a ceiling or outside without placing them near a power supply. With the DWL-P200 Power over Ethernet (Po E) Adapter, both power & data can be transmitted up to 328 feet (100m) using standard Ethernet cabling with virtually no reduction in data throughput. Use the DWL-P200 with Ethernet-enabled devices where power outlets are not readily available. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. ...

The DWL-P50 Power over Ethernet adapter is a single-port splitter that provides DC power for a non-Po E-equipped device, such as a surveillance camera or a wireless access point. It is designed to operate with LAN switches & other equipment that support industry-standard 802.3af Power over Ethernet (Po E) to deliver operation power to the networked device, allowing you to install the device at places such as on a rooftop or near a ceiling, where power is not easily accessible. The DWL-P50 supports both 5VDC & 12VDC power & can be flexibly deployed with network devices with different power voltage requirements. The DWL-P50 is useful for installation at a factory or TM Wi-Fi hot spot. This compact adapter means that you can install your surveillance cameras & wireless LAN devices on a building rooftop, on or near a ceiling for maximum coverage. Your cameras or wireless access points can be placed up to 100 meters away from a power source. It is at these places that wall AC outlets are inaccessible & providing power to these locations is difficult & expensive. The DWL-P50 is also handy for installation at offices with Internet telephones connected to a Po E Ethernet switch. It eliminates the need to individually power each IP phone. By transmitting remote power through the standard network cabling, the DWL-P50 does away with the need for an AC outlet at each device location. Only a single Ethernet cable is run to each device instead of separate power & data cables. On a standard 4-wire UTP Category 5 cable, only two pairs (pins 1, 2, 3 & 6) are used for Ethernet data transfer. At one end, your Po E Ethernet switch inserts DC voltage into the unused wires, taking advantage of the unused pair of the network cable wires. At the other end, the DWL-P50 taps the DC power from the Ethernet cable for use by the non-Po E device. Consequently, a single Category 5 cable can now carry both Ethernet data & DC power. The idea is to supply the remote end with power & Ethernet connectivity via a single network cable. In addition to eliminating the need for additional, separate wiring for power, the DWL-P50 is also a useful tool that forms part of your centralized power network installation. A central UPS can be added to the Po E switch, to which all your wireless access points, surveillance cameras & Internet phones are connected. This installation provides uninterrupted power without the need to deploy a separate UPS for each device. The DWL-P50 is very small in size & lightweight & requires no configuration setting. It is designed for quick & easy deployment, & can be hooked with a simple plug to a network device placed on a high wall or ceiling. This Po E adapter supports both 5V & 12V DC output, allowing you to deploy it with a variety of devices with different power requirements. A built-in slide switch allows you select the required power output. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

D-Link’s DWR-730 Portable HSPA+ Mobile Router means that you can connect your notebook, tablet & smartphone to the Internet from anywhere there is a 3G connection & share this connection with other users wirelessly. This router is ideal for people that need a portable solution, for example remote workers or people that are moving house & need a temporary Internet connection. Connect & Share Your 3G Connection Simply insert your data-enabled SIM card & the DWR-730 will allow you to share your 3G mobile Internet wirelessly. Get all your mobile devices connected to the Internet or share a 3G Internet connection with family, friends or colleagues when you are out & about. The DWR-730 also means that you can access files on your micro SD card with the built in micro SD card slot 3. Share holiday pictures with your family & friends, or documents & presentations to your colleagues on a business trip by simply connecting the DWR-730 to a computer through USB (Universal Serial Bus). The Portable HSPA+ Mobile Router lets you connect with others & share what’s important to you while you’re on the go. Portable & Secure This router is small enough to fit in your pocket whilst the built-in rechargeable battery means that you can take it anywhere with you & surf the Internet. If you need to recharge it, you can do it easily with any USB (Universal Serial Bus) wall or car charger. The useful OLED display keeps you informed on the real-time status of your 3G Internet connectivity & signal as well as battery, SMS messages & number of devices connected. The Portable HSPA+ Mobile Router may be small but it can keep your wireless connection as secure as if you were connected through your home network. Its built-in firewall prevents potential attacks & hacking attempts from the Internet, & with WPA2 encryption, you can be sure that you are sharing your 3G connection only with the users you want to. ...

. rpd-row { overflow: hidden; padding: 30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width: 100%; }. rpd-left
...

The DWS-3160 is D-Link’s latest Unified L2+ Gigabit Wired/ Wireless Switch. Designed to be the ideal mobility solution for medium-sized & large enterprises & service providers, the DWS-3160 empowers administrators to exercise total control over their wireless networks by centralising all aspects of provisioning & management. Able to manage up to 48 D-Link Unified Access Points by itself & up to 192 in a switch cluster, the DWS-3160 can be configured to act either as a Wireless Controller in the core network, or as an L2+ Gigabit Switch at the edge, enabling it to be seamlessly integrated into any existing network infrastructure. ...

Easy set up
- simple to use Getting started is a snap; the free mydlink Baby app for your mobile device not only guides you step
...

Keep an eye on your beloved pet with the DCS-800L/P Eye On™ Pet Monitor. This portable camera transforms your mobile device into a versatile, yet easy to use pet monitor. Connect to the camera wirelessly or over the Internet so you can check on your pet no matter where you are. It

Includes:: a wide array of features to help you look after your pet including night vision, motion & sound detection. Peace of Mind, Anywhere, Anytime The Eye On™ Pet Monitor is specially designed to make it easy for you to care for your pet. It can detect movement & loud noises such as barking or meowing, & alert you via push notification. Its versatile all-day monitoring turns on night vision automatically when it gets dark, giving you a clear picture day or night so you can keep an eye on things anytime. It’s perfect for use in the home, or even when you’re away; it’s mydlink™-enabled, which means that you can check on your pet remotely & securely over the Internet. Perfectly Portable for Instant Monitoring Anywhere You can take the Eye On™ Pet Monitor with you when travelling with your pet, even when there is no available Internet connection. Just connect your mobile device to the Eye On™ Pet Monitor’s wireless network for instant local monitoring, making it perfect for family holidays or just visiting friends. You can even connect it to an external USB (Universal Serial Bus) battery 1 for total portability! Super Simple to Use Getting started is quick & easy; the free mydlink™ Lite app for i OS & Android mobile devices not only guides you step by step through the setup process but also gives you an easy to use interface for all the advanced features of the Eye On™ Pet Monitor. Check on your pet at a glance, pinch to zoom in & out with ease or play one of five gentle lullabies to soothe & calm your pet. You can even take snapshots & save them directly to your mobile device! Just download the free mydlink™ Lite app for your smartphone or tablet & you can quickly & easily setup & view your Eye On™ Pet Monitor from anywhere with a wireless or 4G LTE/3G connection. You can also log onto the secure mydlink™ web portal on your computer to see what your pet if up to. Features Camera Night vision with infrared LEDs that turn on automatically when it gets dark 802.11n wireless lets you place the camera anywhere Can be powered by an external USB (Universal Serial Bus) battery 1 Interchangeable yellow, blue & pink accent colour rings Intelligent Pet Monitoring Sound detection alerts you to loud noises, such as your dog barking or cat meowing Motion detection lets you know if the camera detects movement Notifications can be sent to your mobile device when motion or sound is detected Two-way audio lets you hear & talk back to your pet 2 Monitor from your Mobile Device or Computer Uses the free mydlink™ Lite app for i OS & Android devices The mydlink™ Lite app helps you set up your device & gives you easy access to all functions Monitor from your computer through the secure mydlink™ web portal Technical Specifications Camera Camera Hardware Profile 1/5” VGA CMOS sensor 5 metre IR light illumination distance Minimum illumination: 0 lux with IR LEDs on Built-in microphone & speaker Digital zoom Adjustable angle & pivot Focal length: 2.44mm Aperture: F2.4 Angle of view: (H) 57° (V) 42° (D) 68° External Device Interfaces 802.11n wireless Reset button Direct button Power port (micro USB) LED Link/ Activity/ Power Cloud/ Direct Mode Image Features Configurable image size Time stamp overlay Video Compression MJPEG format video compression JPEG for still images Video Resolutions 640 x 480 320 x 240 Audio Support PCM Pet Monitoring Features Sound detection with adjustable sensitivity Motion detection with adjustable sensitivity 2-way audio lets you listen & respond to your pet 2 Sends notifications when sound or motion is detected Mobile App mydlink™ Lite app available on the App Store & Google Play Compatible with iPhone & iPad using i OS 5.1.1 or higher Compatible with Android smartphones & tablets using Android 4.1 or higher Network Network Protocols IPv 4 ARP TCP/IP UDP ICMP DHCP client HTTP HTTPS (for configuration) UPn P port forwarding Security Administrator protection Password authentication HTTP authentication Physical

Dimensions (L x W x H) 70 x 75 x 100 mm (2.8 x 3.0 x 3.9 inches) Weight 108.2g (3.8 oz) Power Input 5 V DC / 1.5 A, 50/60 Hz through power adapter Can be powered by an external USB (Universal Serial Bus) battery with at least 2 A output 1 Power Consumption 4.4 watts max. Temperature Operating: 0 to 40 °C (32 to 104 °F) Storage: -20 to 70 °C (-4 to 158 °F) Humidity Operating: 20% to 80% non-condensing Storage: 5% to 95% non-condensing Certifications CE CE LVD FCC IC C-Tick



...