The CRYORIG Airflow Fan At CRYORIG, we create solutions for problems. Being experts of air cooling, we thought why not take the best of both worlds, sometimes it is as simple as sticking a fan to it! More airflow, better cooling! Our PWM controlled Airflow fan can modify fan RPM speed based on the heat & processing load of the system. Hybrid Liquid Cooling The Best of Air & Liquid Just by adding the proprietary Airflow fan, CRYORIG’s HLC (Hybrid Liquid Cooling) unit significantly lowers surrounding stagnant heat. Cooler components, more system stability, & longer PC longevity! Multi Seg™ Mounting Kit With Full Metal Backplate CRYORIG’s renowned " Multiseg™" Quick Mount System makes a return in the A series. The solid metal backplate system provides a more secure & firm install than other mounting systems. High-end Radiator CRYORIG’s high FPI radiators are specifically designed to match the characteristics of our high airflow high air pressure QF120/QF140 fans. High FPI count, high air pressure & increased heat exchange surface guarantees the CRYORIG A Series for performance. Added Radiator Air Flow With Quad Air Inlet™ CRYORIG’s proprietary Quad Air Inlet™ system features four strategically placed aerodynamic air inlet for extra air intake & higher air output volume. More air pushing through the radiator, means more heat exchange & a cooler system! 5th Generation Pump & Cold Plate Technology Built on the bases of Asetek’s Gen. 5 Pump & Cold Plate design, CRYORIG’s A Series HCL units have a completely redesigned & enhanced pump system. A redesigned impeller & motor system increases impeller torque & optimized liquid routing. The Gen. 5 pumps in CRYORIG’s HLC units manages to further lower temperatures while maintaining the same noise profile as competing Gen. 4 based products. ...

This top flow CPU heatsink (with white frame) has been specifically designed for ITX systems. This low profile super cooler delivers exceptional performance no matter how intense the environment. Keep your valuable CPU cooled with this top of its class heatsink from Cryorig. Install in minutes The C1 is easy to install. Using Cryorig’s quick mount system & the kit included in the box you can have your new CPU cooler installed in five minutes. It’s that simple. &, if you do get stuck, there is a helpful installation guide supplied with the cooler. Technical specifications Heatsink Dimension (with fan )
- L144.5 mm x W140 mm x H74 mm Weight (with fan )
- 628 g Weight (without fan )
- 539 g Heat pipes
- 6mm heatpipe x 6 units Top Fin
- T = 0.4 mm ; Gap = 1.8 mm Top Fin Pcs
- 56 pcs Bottom Fin
- T = 0.4 mm ; Gap = 1.4 mm Bottom Fin Pcs
- 35 pcs Copper Base
- C1100 Pure copper nickel plated RAM Height Limit
- 42 XT140 Dimension
- L140 mm x W140 mm x H13 mm Weight
- 89 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 20 ~ 24 d BA Air Flow
- 65 CFM














...

The exclusive Hive Fin technology used by Cryorig delivers an extreme performance allied with outstanding efficiency. The radical design employed in the H5 the flow of air is vastly accelerated whilst any turbulence is reduced. Leading to increased performance with silent & vibration free operation. The H5 is compatible with heat spreaders on both Intel & AMD platforms so can be used with most rigs & systems. Easy mounting system Cryorig continually push the boundaries with their tech & their exclusive Multiseg quick mount system. Very easy to install this heatsink cooler can be fitted in just a few minutes. If you are building a PC or upgrading your current rig the H5 will ensure your system runs cold & efficiently. Technical

Specification Heatsink

Specification Dimension (with fan )
- L98 mm x W143 mm x H160 mm Weight (with fan )
- 853 g Weight (without fan )
- 764 g Heat pipes
- 6mm heatpipe x 4 units Fin
- T = 0.4 mm ; Gap = 2.8 mm Fin Pcs
- 38 pcs Copper Base
- C1100 Pure copper nickel plated RAM Height Limit
- Limitless XT140 Dimension
- L140 mm x W140 mm x H13 mm Weight
- 89 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 20 ~ 24 d BA Air Flow
- 65 CFM
















...

Breaking Design Molds Efficiency by Innovation CRYORIG H Series coolers feature our proprietary Hive Fin™ structure. This design allows for a combination of Jet Fin Acceleration™ & Turbulence Reduction, as well as strengthening structural strength of the fin stacks. Combined together, the Hive Fin™ design brings cool innovation. Air Exhaust Acceleration Hot Air Cooled Fast By utilizing a larger air intake & narrower air exhaust section on the fins, compresses the air to move faster while exiting the heatsink. Jet Fin Acceleration System™ carries the hot air out of the system faster & more efficiently. Extreme Efficiency Turbulence Reduction System Utilizing a bee hive shaped structure at the front air intake of the heatsink, lowers air turbulence & straightens out the airflow. Assisting airflow to move directly through the full length of the heatsink & carrying out hot air. XL Surface Area Maximum Heat Dissipation The H series coolers by CRYORIG feature an extended fin surface area to the back. This allows the heatsink to achieve phenomenal cooling performance comparable to Dual Tower coolers & heatsinks. The H5 in particular has a cooling surface area within 90% of our top-line R1 series coolers. Optimized Heatpipe Positioning Total CPU Coverage The H5’s Heatpipe Convex-Align™ System allows for more heatpipes in a given area, optimized heatpipe placement in the copper base, & enhanced alignment with your CPU. With the Heatpipe Convex-Align™ System, each heatpipe functions to their maximum TDP capacity. Enhanced Performance With Fine Tuned Acoustics While boasting a full 140mm diameter 1300rpm high airflow XF140 PWM fan, CRYORIG has also fined tuned the acoustics to match performance. That’s why the XF140 140mm fan integrates several noise reduction optimizations. The XF140 features our High Precision Low Noise (HPLN™) bearing & the detachable Acoustic Vibration Absorbers that give the fan a snugger fit while canceling vibration & noise at the same time. Patent Pending " Multi Seg™" Quick Mount System Patent Pending Multiseg™ Quick Mount System providing an all in one solution on Intel platforms, CRYORIG’s Multi Seg™ Quick Mount System allows for a securer & firmer installation within minutes. Fully Compatible Fast & Easy to Install The H5 is highly efficient & easy to install. With maximum compatibility for virtually all setups, it’s the heatsink that’s compatible, competitive & cool. ...

Increased Air Exhaust Speed, Higher Cooling Efficiency The CRYORIG M9i/M9a features CRYORIG proprietary Jet Fin Acceleration System™. By creating a structure of alternated fin stacks, the M9i/M9a has a wider air intake area & higher fin density air exhaust area to squeeze out air, heated air exits the system faster. True Copper Base Plate, Increased Cooling Efficiency CRYORIG’s M9i/M9a while being an entry level product, comes with a True Copper Base Plate. Copper base plates can effectively spread heat to all heatpipes & allows for increased heat contact area. In comparison on a heatsink without a True Copper Base Plate, the heat source from the CPU die will not efficiently reach the outer heatpipes & the aluminum material holding heatpipes also provide lackluster contact & heat conduction with the heatpipes. Together with the highly heat conductive C1100 Pure Copper, further increasing heat conduction efficiency of the whole cooler. CRYORIG’s Smallest Tower to Date, Minimal Height, Maximum Performance With a total height of 124.6mm, the CRYORIG M9i/M9a is the smallest CRYORIG Tower cooler. Featuring the same materials & cooling technology found on all CRYORIG tower coolers, there are no compromises or downgrades to quality & performance. It’s the perfect entry product to PC Building, Enthusiast Grade Cooling, & Overclocking. Zero Interference, Any RAM Any Height Focusing on providing the widest range of compatibility, the M9i/M9a’s small size moves the heatsink away from the RAM & inside the *CPU Keep Out Zone, offering optimal compatibility for RAM with tall heat spreaders on both Intel 115X & AMD platforms. * The CPU Keep Out Zone is a design guideline set by both Intel & AMD. It is set around the CPU, & dictates no components over a certain height can be placed there. 33% Cooler Than Stock With Tower Cooling Technology With the help of CRYORIG proprietary cooling technology & a more efficient heatpipe based tower design, the CRYORIG M9i/M9a out performs stock cooling options while using less RPM & generating less noise. Augmented Backplate System, Safe & Secure Support The M9i/M9a like all CRYORIG tower heatsinks

Includes:: a backplate support system that evenly spreads out the heatsink mounting force through the whole surface of the backplate, & protecting your mainboard. Made from fiberglass augmented PBT material, it provides just the right amount of tensile strength for the best mounting force & support for your system. Fast Easy & Secure, Install Within Minutes With our new Multi Seg™ Light quick mounting systems, the M9i/M9a is extremely easy to mount. Watch how to install your M9 within minutes.

...

Designed for added compatibility the R1 universal dual tower CPU heatsink with white frame & black fins is optimised for use with both Intel & AMD platforms. Cryorig produces a range of high performance & ultra-reliable cooling components that have been specifically designed for PC modding & overclocking. PC builders looking for the ultimate cooling solution will enjoy the R1 & the great performance it delivers. Envelope pushing technology Optimised with Cryorig’s exclusive Heatpipe Convex-Align technology & accelerated air exhaust system the R1 universal dual tower delivers an outstanding performance. & the R1 not only keeps your system cooler for longer it does so also silently. The 140mm fans are ultra-quiet thanks to High Precision Low Noise technology. Once your system is up & running you won’t hear a thing as fan noise & vibration will be a thing of the past. Five minute fix So easy to install on both AMD & Intel platforms the R1 comes complete with all the fixings you need. There is also a handy installation guide that will have your new cooling system installed within five minutes. Technical

Specification Heatsink Dimension (with fan )
- L128.5 mm x W140 mm x H168.3 mm Weight (with fan )
- 1181 g Weight (without fan )
- 936 g Heat pipes
- 6mm heatpipe x 7 units Front Fin
- T = 0.4 mm ; Gap = 2.4 mm Front Fin Pcs
- 42 pcs Rear Fin
- T = 0.4 mm ; Gap = 1.8 mm Rear Fin Pcs
- 53 pcs Copper Base
- C1100 Pure copper nickel plated Distance From Centre
- 35.5 mm RAM Height Limit
- Limitless XF140 Dimension
- L140 mm x W140 mm x H25.4 mm Weight
- 156 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 19 ~ 23 d BA Air Flow
- 76 CFM XT140 Dimension
- L140 mm x W140 mm x H13 mm Weight
- 89 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 20 ~ 24 d BA Air Flow
- 65 CFM Motherboard compatibility 2011 Socket LGA 1366 Socket LGA 1150 Socket LGA 1155 Socket LGA 1156 Socket LGA 775 Socket LGA FM1/2 Socket AM2/+ Socket AM3/+ Socket






















...

The CRYORIG CP5 combines high grade Thermal Performance & a high Particle Density. Slightly higher in viscosity but still easily spread, the CRYORIG CP5 is best suited for high-end overclocking & seasoned system builders. CP5

Specification Colour: Grey

Volume: 4g Thermal Conductivity: 9.3 Thermal Impedance: 0.007



...

The CRYORIG CP7 balances the attributes of Thermal Performance, Spread & Particle Density. The CP7 is easy to apply & provides top notch performance & with a lower viscosity level, does not require high mounting pressure to perform. CP5

Specification Colour: Grey

Volume: 4g Thermal Conductivity: 8.3 Thermal Impedance: 0.011



...

The CRYORIG CP15 is the everyday CRYO-Paste of choice. Low viscosity & low maintenance, the CP15 requires minimal effort to apply & minimum mounting pressure to deliver it's full performance. CP15

Specification Colour: White

Volume: 4g Thermal Conductivity: 5.7 Thermal Impedance: 0.026



...

Always pushing the envelope Cryorig have developed the ideal cooling systems for modding, overclockers & gamers. If you are building your own PC or upgrading an existing rig it is essential to have a first class cooling system. & this Cryorig 140mm fan delivers the exceptional performance & faultless reliability demanded by all PC builders. High Precision Low Noise The XF140 benefits from Cryorig’s HPLN bearing which allows super-fast performance with noiseless operation. Included with the fan are three sets of coloured acoustic vibration absorbers with red, white & black pegs. Not only do these absorbers reduce the noise generated by the fan they also look incredibly cool when the fan is operating. Technical

Specification Dimension
- L140 mm x W140 mm x H25.4 mm Weight
- 156 g Rated Speed
- 700 ~ 1300 RPM ±10 % Noise Level
- 19 ~ 23 d BA Air Flow
- 76 CFM






...