Features Corsair Link Integration for monitoring performance & adjustment of fan speed & multi-rail/single rail mode. 80 PLUS Platinum efficiency, delivering 92% energy efficiency at real world load conditions. Zero RPM mode for fanless operation at low loads & outstanding noise reduction. 140mm thermally controlled fluid dynamic bearing fan spins up as needed. Fully Modular low profile cables for easy installation, less clutter, & helps maximize airflow through your computer’s chassis. Engineered to meet maximum power output at a server-grade 50C temperature rating. Fan self-test switch to determine fan functionality even before installation. Over-voltage protection, under-voltage protection, & short circuit protection, over power protection, over temperature protection provide maximum safety to your critical system components. Safety & Agency Approvals: FCC, ICES, CE, UL / CUL, CSA, C-Tick/RCM, TUV, CB, CU, KC Mark, Ro HS, WEEE, Ro HS (China), REACH.

Specification 80 Plus Platinum Power: 1000 Watts Fanless mode: Yes Fan bearing technology: Fluid Dynamic Bearing Fan size (mm): 140mm C-Link Digital: Yes Continuous output rated temperature (°C): 50°C ATX Connector: 150mm x 86mm x 180mm Modular: Yes Sleeved cables: Low-Profile, All Black ATX Connector: 1 EPS Connector: 2 Floppy Connector: 2 Four Pin Peripheral Connector: 12 PCI Connector: 8 SATA Connector: 12

...

HXi Series power supplies give you extremely tight voltage control, virtually silent operation, & a fully modular cable set. With all Japanese 105°C capacitors, they’re a great choice for high performance PCs where reliability is essential. 80 PLUS Platinum efficiency reduces operating cost & excess heat, & together with Zero RPM Fan Mode technology, gives you virtually silent operation. With Corsair Link Digital support, you can monitor power supply performance, toggle single rail or multi rail mode, & control fan speed directly from your desktop. &, the fully modular, low profile cable set makes builds & upgrades easy, with clean, great-looking results. Quiet, efficient operation 80 PLUS Platinum efficiency & Zero RPM Fan Mode mean that at low to medium loads, the fan doesn’t spin at all. & when you do push the HXi hard, the thermally controlled fan spins only as fast as it needs to. But that’s not all. It’s quieter than most PSUs when the fan’s not spinning, too. The HXi is built with capacitors & other internal components specially selected to reduce coil whine & other electronic noise. Corsair Link Digital for advanced monitoring & control Connect the included cable to a motherboard USB (Universal Serial Bus) header & download the free Corsair Link Dashboard application for Windows & you can monitor performance & efficiency, toggle single rail or multi rail mode, & control fan speed directly from your desktop. Easy Installation The fully modular, low-profile cable set allows for quick & easy installation & great-looking builds. The fan self-test switch lets you quickly confirm operation before you even attach cables to your motherboard. Contents & Specifications Package contents
- HXi Series High-Performance ATX Power Supply Compatibility 4th generation Intel Core processor Ready (Intel Haswell & Z87 motherboards) ATX12V v 2.4 & EPS 2.92 standards & is backward compatible with ATX12V 2.2, 2.31 & ATX12V 2.01 systems Features Corsair Link Integration for monitoring performance & adjustment of fan speed & multi-rail/single rail mode. 80 PLUS Platinum efficiency, delivering 92% energy efficiency at real world load conditions. Zero RPM mode for fanless operation at low loads & outstanding noise reduction. 140mm thermally controlled fluid dynamic bearing fan spins up as needed. Fully Modular low profile cables for easy installation, less clutter, & helps maximize airflow through your computer’s chassis. Engineered to meet maximum power output at a server-grade 50C temperature rating. Fan self-test switch to determine fan functionality even before installation. Over-voltage protection, under-voltage protection, & short circuit protection, over power protection, over temperature protection provide maximum safety to your critical system components. Safety & Agency Approvals: FCC, ICES, CE, UL / CUL, CSA, C-Tick/RCM, TUV, CB, CU, KC Mark, Ro HS, WEEE, Ro HS (China), REACH
...

rich-media-frame { font-weight: inherit; font-style: inherit; font-family: inherit;

Width: 700px; margin: auto;

...

Quiet, efficient operation 80 PLUS Platinum efficiency & Zero RPM Fan Mode mean that at low to medium loads, the fan doesn’t spin at all. & when you do push the HXi hard, the thermally controlled fan spins only as fast as it needs to. But that’s not all. It’s quieter than most PSUs when the fan’s not spinning, too. The HXi is built with capacitors & other internal components specially selected to reduce coil whine & other electronic noise. Corsair Link Digital for advanced monitoring & control Connect the included cable to a motherboard USB (Universal Serial Bus) header & download the free Corsair Link Dashboard application for Windows & you can monitor performance & efficiency, toggle single rail or multi rail mode, & control fan speed directly from your desktop. Easy Installation The fully modular, low-profile cable set allows for quick & easy installation & great-looking builds. The fan self-test switch lets you quickly confirm operation before you even attach cables to your motherboard. Contents & Specifications Package contents HXi Series High-Performance ATX Power Supply Compatibility 4th generation Intel Core™ processor Ready (Intel Haswell & Z87 motherboards) ATX12V v 2.4 & EPS 2.92 standards & is backward compatible with ATX12V 2.2, 2.31 & ATX12V 2.01 systems Features Corsair Link™ Integration for monitoring performance & adjustment of fan speed & multi-rail/single rail mode. 80 PLUS Platinum efficiency, delivering 92% energy efficiency at real world load conditions. Zero RPM mode for fanless operation at low loads & outstanding noise reduction. 140mm thermally controlled fluid dynamic bearing fan spins up as needed. Fully Modular low profile cables for easy installation, less clutter, & helps maximize airflow through your computer’s chassis. Engineered to meet maximum power output at a server-grade 50C temperature rating. Fan self-test switch to determine fan functionality even before installation. Over-voltage protection, under-voltage protection, & short circuit protection, over power protection, over temperature protection provide maximum safety to your critical system components. ...

. rpd-row { overflow:hidden; padding:30px 0; border-bottom: 1px solid eee; }. rpd-row img { max-
Width:100%; }. rpd-left
...

A 280mm radiator & dual SP140L PWM fans provide the excellent heat dissipation you need for highly overclocked CPUs The Hydro Series H110i GT is an extreme performance, all-in-one liquid CPU cooler for cases with 280mm radiator mounts. The 280mm radiator & dual SP140L PWM fans provide the excellent heat dissipation you need for highly overclocked CPUs. It’s Corsair Link compatible, so you can customize cooling performance, monitor system temperature, & change the color of the RGB LED lighting. 280mm radiator The secret to fast, efficient cooling is maximizing cooling surface area. If your PC case has dual 140mm fan mounts spaced for a 280mm radiator, the H110i GT lets you take advantage of your case’s full cooling potential. Advanced SP140L PWM fans The included 140mm fans are custom-designed for high static pressure air delivery with minimum turbulence & noise. They’re PWM controlled, so you can customize the fan speed to find the optimal balance of cooling & noise. Built-in Corsair Link Attach the included Corsair Link cable to a USB (Universal Serial Bus) header on your motherboard & download the free Corsair Link software to unlock even more power. You can customize cooling performance, monitor coolant & CPU temperatures, & change the color of the RGB LED lighting from the default white to match your system, or to change color based on temperature readings & other inputs. High-performance CPU cooling made simple The H110i GT is a closed loop design that comes pre-filled. It

Includes:: a modular, tool-free mounting bracket for faster installation, & it features enhanced coldplate & pump designs for highly tuned efficiency. About Hydro Series Liquid CPU Coolers Corsair Hydro Series CPU coolers give you the power of liquid cooling in a compact, easy-to-install package. They offer superior cooling for higher overclocking performance, without the complexity of traditional water cooling kits. Contents & Specifications Package contents Hydro Series H110i GT Liquid CPU Cooler Mounting kit for all modern CPU sockets Two SP140L High Torque 140mm Fans USB (Universal Serial Bus) cable for Corsair Link Integration Fan & radiator mounting screws Thermal compound (pre-applied) Quick Start Guide Compatibility Intel LGA 1150, 1155, 1156, 1366, 2011 & 2011-3 AMD sockets FM1, FM2, AM2, & AM3 Technical specifications Radiator dimensions: 140mm x 322mm x 27mm Fan dimensions: 140mm x 25mm Fan speed: 2100 +/- 10% RPM Fan airflow: 113 CFM Fan static pressure: 3.99mm-H2O Noise level: 43d B (A)

...

Corsair Hydro Series H100i Extreme Performance Liquid CPU Cooler Extreme Performance CPU Cooling Have a PC case that supports a top-mounted 240mm radiator? Take your CPU cooling to a new level. H100i offers twice the radiator surface area of the H80i for even better performance. The 240mm top-mounted radiator provides maximum surface area for maximum cooling power. The 120mm fans use wide, low-pitch blades for better static pressure to noise ratio, offering enhanced efficiency at lower noise levels. Corsair Link Monitoring & Control Monitor temperature & control lighting & fan speed on your screen. No additional hardware is necessary. Key Features • Dual length 240mm radiator for increased surface area & cooling potential. • Integrated Corsair Link™ functionality means that you can adjust fan speed profiles & lighting, & monitor coolant temp via the free Corsair Link Dashboard software download. • Two SP120L High Performance fans optimize static pressure at a reduced noise level for amazing performance. • Large-diameter, low permeability tubing ensures long life & improves flexibility for an easier installation. • A new enhanced micro-channel cold-plate design more efficiently transfers heat. • Quick & easy magnetic installation brackets make it easier than ever to upgrade to watercooling. •

Includes:: mounting hardware compatible with all modern CPU socket designs. • 5 Year Warranty. CPU Compatibility: • Intel LGA 1155 • Intel LGA 1156 • Intel LGA 1366 • Intel LGA 2011 • AMD AM2 • AMD AM3 • AMD FM1 • AMD FM2 Box Contents • Corsair Hydro Series H100i High Performance Liquid CPU Cooler • Magnetic Multi-platform mounting kit for all modern CPU sockets • Dual SP120L High Performance Fans • USB (Universal Serial Bus) Cable for Corsair Link™ Compatibility • Fan & radiator mounting screws • Thermal compound (pre-applied) • Quick Start Guide H100i " New Firmware & Corsair Link Dashboard Available to download
- Important Updates included http://www.corsair.com/us/media/cms/drivers/H100i_v 1.0.4.zip NOTE: The Corsair Hydro Series™ H100i requires a case that is compatible with 240mm length radiators, like many of the Corsair Obsidian™, Graphite™, Vengeance™ or Carbide™ series cases


...

Corsair Hydro Series H100i Extreme Performance Liquid CPU Cooler Refurbished Box is original package in B grade condition



...

Dual SP120L PWM fans with Corsair Link monitoring & control for extreme liquid CPU cooling performance. The Hydro Series H100i GTX is an extreme performance, all-in-one liquid CPU cooler for cases with 240mm radiator mounts. The 240mm radiator & dual SP120L PWM fans provide the excellent heat dissipation you need for highly overclocked CPUs. Corsair Link is built in, so you can monitor temperatures, adjust cooling performance & customize LED lighting directly from your desktop. 240mm radiator The double-wide radiator offers Approx. twice the cooling area of our Hydro Series coolers which use a 120mm or 140mm radiator. It fits virtually any case that has dual 120mm fan mounts spaced for a 240mm radiator. Advanced SP120L PWM fans Our custom-designed SP120L fans are different than standard case fans – they’re custom-designed to deliver high static pressure for mounting directly against radiators, & the fan blades are specially shaped for maximum air delivery with minimum noise. Since they’re PWM controlled, you can customize the fan speed to choose the optimal point on the performance/noise curve. Built-in Corsair Link for monitoring, customization, & control Attach the included Corsair Link cable to a USB (Universal Serial Bus) header on your motherboard & download the free Corsair Link software to unlock even more power. You can customize cooling performance, monitor coolant & CPU temperatures, & change the color of the RGB LED lighting from the default white to match your system, or to change color based on temperature readings & other inputs. High-performance CPU cooling made simple Gone are the days when watercooling required lots of work. The H100i GTX is a closed loop design that comes pre-filled, & it comes with a modular, tool-free mounting bracket for faster installation. About Hydro Series Liquid CPU Coolers Corsair Hydro Series CPU coolers give you the power of liquid cooling in a compact, easy-to-install package. They offer superior cooling for higher overclocking performance, without the complexity of traditional water cooling kits. Package contents Hydro Series H100i GTX Liquid CPU Cooler Mounting kit for all modern CPU sockets Two 120mm High Torque Fans Fan & radiator mounting screws Thermal compound (pre-applied) Compatibility Intel™ LGA 1150, 1151, 1155, 1156, 1366, 2011, 2011-3 AMD™ sockets FM1, FM2, AM2, AM3 Technical specifications Radiator dimensions: 276mm x 125mm x 30mm Fan dimensions: 120mm x 120mm x 25mm Fan speed: 2435 +/- 10% RPM Fan airflow: 70.69 CFM Fan static pressure: 4.65 mm H2O Fan noise level: 37.7 d B (A) ...

Extreme CPU cooling performance with customizable PWM fan speed & a high-capacity 240mm radiator. Hydro Series H105 provides extreme CPU cooling performance. The 38mm thick 240mm top-mounted high-capacity radiator is paired with high-RPM SP120L fans for the fast heat dissipation you need for highly overclocked CPUs. &, PWM fan speed fan control lets you select the precise level of cooling power you need through your motherboard BIOS. Installation is easy, with an all-new mounting bracket that provides quick, tool-free assembly. The three included red, grey, & blue accent rings let you match your H105 to your DRAM & motherboard color scheme. &, like all Hydro Series liquid CPU coolers, the H105 is completely self-contained, with no filling or maintenance required. Product Features Extreme CPU cooling performance The extra-thick 240mm radiator increases surface area significantly for superior heat dissipation. Take advantage of your case's 240mm radiator mount Use your case to its fullest potential with a massive CPU cooler. Protect your hardware & increase your CPU's overclocking potential Keep your CPU frosty at stock speeds or eek out that extra hundred megahertz of clock speed. Dual SP120L fans with PWM control for customized cooling performance SP120L high performance, high static pressure fans are optimized specifically for radiator usage. All-new mounting bracket design for easy installation Thumbscrews & snap-in head mount ring design for quick & easy installation on AMD & Intel processors.

Includes:: three color accent rings to match your H105 to your motherboard Default metallic grey, & added red & blue colored rings to match your Corsair Air Series fans or other motherboard, memory, or GPU color themes in your case. Radiator

Dimensions
- 270mm x 120mm x 38mm Fan

Dimensions
- 120mm x 25mm Fan Speed
- 800
- 2700 +/- 10% RPM (PWM) Air Flow
- 73 CFM Static Pressure
- 3.9 mm-H2O Noise Level
- 37.7 d B (A) CPU Compatibility Intel LGA 115x Intel LGA 1366 Intel LGA 2011 AMD AM2 AMD AM3 AMD FM1 AMD FM2












...