TRENDnet’s 48-Port Gigabit Web Smart Po E+ Switch, model TPE-4840WS, offers 12 x Gigabit Po E+ ports (ports 1-12 802.3at), 12 x Gigabit Po E ports (ports 13-24 802.3af), 24 x Gigabit ports (ports 25-48), 4 x shared SFP slots (shared with ports 45-48), & a Po E Power budget of 370 Watts. This IPv 6 ready switch offers advanced traffic management, troubleshooting, access control, energy saving GREENnet, & monitoring features at a reduced cost. Hardware Design Provides 12 x Gigabit Po E+ ports (ports 1-12 802.3at), 12 x Gigabit Po E ports (ports 13-24 802.3af), 24 x Gigabit ports (ports 25-48), 4 x shared SFP slots (shared with ports 45-48), a Po E Power budget of 370 Watts, &

Includes:: rackmount brackets. Smart Fan Smart fan saves energy by varying fan speed & use based on cooling needs. IPv 6 Ready This switch supports IPv 6 configuration & IPv 6 neighbor discovery. Traffic Management A broad range of network configurations are supported by: 802.3ad link aggregation, Asymmetric VLAN, 802.1Q VLAN, Voice VLAN, Private VLAN, Bandwidth Controls, GVRP, IGMP v 1-v 3, 802.1p Class of Service (Co S), Spanning Tree (STP, RSTP, & MSTP), & Qo S queue scheduling. Troubleshooting Real time traffic comparison charts, error group charts, & a convenient cable diagnostic test aid in rapid troubleshooting. Access Controls Features such as ACL, SSL, MAC/port filtering, Denial of Service controls, 802.1X, TACACS+, & RADIUS are compatible with layered network access controls. Monitoring RMON, SNMP, SNMP Trap, & Port Mirroring support administrator monitoring solutions. Features 12 x Gigabit Po E+ ports 12 x Gigabit Po E ports 24 x Gigabit ports & 4 shared SFP slots 370 Watt Po E budget 96 Gbps switching capacity Private/ Voice VLAN, Qo S, & bandwidth controls Smart fans reduce energy consumption Rack mount brackets included Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com.

...

TRENDnet’s Gigabit Po E+ Repeater, model TPE-E100, extends a Gigabit Po E/ Po E+ network connection to a remote location. It auto-detects a Po E (15.4 Watts) or Po E+ (30 Watts) signal & extends it an additional 100 meters (328 ft.) for a total distance of up to 200 meters (656 ft.) from the Po E device. Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.)*. Handy mounting points & no external power adapter facilitate remote installations. Extension Distance Extends a Po E/ Po E+ network connection an additional 100 (328 ft.) meters for a total distance of up to 200 meters (656 ft.) from the Po E device Po E/ Po E+ Auto detects a 15.4 Watt Po E (IEEE 802.3af class 1-4) or 30 Watt Po E+ (IEEE 802.3at) network connection Gigabit Ports Gigabit ports extend a high performance wired connection Daisy Chain Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.) Plug & Play Plug & play Po E/ Po E+ network cables Po E Powered No external power required—saves installation time & cost Mounting Wall mounting points for remote installations LED indicators LED indicators confirm Po E & network connectivity Housing Rugged metal enclosure Features Extends 100 meters for a total distance of up to 200 meters (656 ft.) Daisy chain two TPE-E100s for a total Po E+ network extension of 300 m (980 ft.) Plug & play installation No external power required Wall mountable LED indicators Rugged metal housing ...

TRENDnet’s Gigabit Po E+ Repeater, model TPE-E100, extends a Gigabit Po E/ Po E+ network connection to a remote location. It auto-detects a Po E (15.4 Watts) or Po E+ (30 Watts) signal & extends it an additional 100 meters (328 ft.) for a total distance of up to 200 meters (656 ft.) from the Po E device. Daisy chain two TPE-E100s for a total Po E network extension of 300 m (980 ft.)*. Handy mounting points & no external power adapter facilitate remote installations. Extension Distance Extends a Po E/ Po E+ network connection an additional 100 meters for a total distance of up to 200 meters (656 ft.) from the Po E device Po E/ Po E+ Auto detects a 15.4 Watt Po E (IEEE 802.3af class 1-4) or 30 Watt Po E+ (IEEE 802.3at) network connection Gigabit Ports Gigabit ports extend a high performance wired connection Daisy Chain Up to 7 units for a Po E+ (802.3at) network connection Up to 4 units for a Po E (802.3af) network connection Plug & Play Plug & play Po E/ Po E+ network cables Po E Powered No external power required—saves installation time & cost Mounting Wall mounting points for remote installations LED indicator LED indicator confirms power Housing Rugged metal enclosure Features Extends 100 meters for a total distance of up to 200 meters (656 ft.) Daisy chain up to 7 units for a total Po E+ network extension of 800 m (2, 600 ft.) * Plug & play installation No external power required Wall mountable Rugged metal housing ...

TRENDnet’s 16-Port 30 Watt 10/100 Mbps Po E+ Switch, model TPE-T160, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. The IEEE 802.3at Po E+ standard supplies up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan Tilt Zoom) Network Cameras, & Vo IP telephony systems. Auto sensing technology delivers up to 30 watts to 802.3at Po E+, 15 watts to 802.3af Po E, & only data to non-Po E devices. GREENnet technology reduces energy costs by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 3.2 Gbps. LED indicators display device status for easy power management & troubleshooting. An internal power supply reduces clutter & a convenient on/off button is located on the back of the switch. Use this switch with TRENDnet Po E Splitters to install non-Po E devices in remote locations. Features IEEE 802.3at & IEEE 802.3af Power over Ethernet (Po E) compliant Support Po E class 2 (7 watts), 3 (15.4 watts), & 4 (30 watts) 16 x 10/100 Mbps Auto-MDIX Po E+ ports Provides 30 watts per Po E port 3.2 Gbps switching fabric On/off power switch Full wire-speed non-blocking switching Store-&-forward switching method Back pressure Flow Control for half-duplex mode IEEE 802.3x Flow Control for full-duplex mode 1.25 Mbits RAM Data Buffer 4K MAC address entries 500 watt Internal Power supply: AC input (90~260V/AC, 50~60 Hz) Plug & Play Sturdy 1U 19” rack mountable metal enclosure 3-year limited warranty Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The 16-Port 10/100 Mbps Po E+ Switch, model TPE-T160H, delivers data & power over existing Ethernet cables to Power over Ethernet (Po E) devices such as Access Points & IP Cameras. It supplies up to 30 Watts of power per port with a 250 Watt power budget. A convenient on/off button is located on the back of the switch & a rack mount kit is included. Hardware Po E+ Supplies up to 30 Watts of Po E power per port with a 250 Watt power budget Ports 16 x 10/100 Mbps Po E+ ports Switching Capacity 3.2 Gbps switching capacity Rack Mountable Rack mountable metal enclosure with included mounting kit On/ Off Convenient on/off switch LED Indicators LED indicators convey port status Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

TRENDnet’s 8-Port Gigabit GREENnet Po E+ Switch, model TPE-TG81g, reduces equipment & installation costs by delivering data & power over existing Ethernet cables. This unmanaged switch offers eight Gigabit Po E+ ports which supply up to 30 watts of power per port for devices such as high power wireless access points, PTZ (Pan / Tilt / Zoom) Network Cameras, & Vo IP telephony systems. This rack mountable switch features an internal power supply. Auto sensing technology delivers 30 watts to 802.3at Po E+ devices (up to 3 devices), 15 watts to 802.3af Po E devices, & only data to non-Po E devices. GREENnet technology reduces energy consumption by up to 75% when the switch is not in use. Boost office efficiency & reduce network congestion with a total switching capacity of 16 Gbps. LED indicators display device status for efficient troubleshooting. This switch comes in a sturdy metal case & quickly adds Po E+, Po E, & non-Po E devices to your network. Features IEEE 802.3at & IEEE 802.3af Power over Ethernet (Po E) compliant Supports Po E Class 2 (7 watts), 3 (15.4 watts), & 4 (30 watts) 8 x Gigabit Auto-MDIX Po E / Po E+ ports Internal power supply Up to 75% GREENnet energy savings Provides up to 30 watts for Po E+ (3 ports max.) Provides up to 15.4 watts for Po E Automatically detects the Po E class level of a Powered Device 16 Gbps switching fabric Forwarding rate: 1000 Mbps / 1, 488, 000pps; 100 Mbps / 148, 800 pps; 10 Mbps / 14, 880 pps Status LEDs: System Power, Po E, 1000 Mbps, & Link / Activity 2K Mac address entries 96 Kbyte memory buffer Full wire-speed non-blocking reception & transmission Store-&-forward switching method Back pressure Flow Control for Half-Duplex mode IEEE 802.3x Flow Control for Full-Duplex mode Power saving technology powers down unused ports & when a connected device is in standby mode Jumbo Frame support up to 9 Kbytes Plug & Play Sturdy rack mountable metal case 3-year limited warranty Please note: networking components such as switches, routers & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The Powerline 200 AV Nano Adapter, model TPL-308E, uses an electrical outlet to create a secure high speed network. Two adapters are needed to start a network. Connect one adapter to your router & plug another adapter into an outlet on your electrical system for instant high speed network access. The compact form factor saves space around crowded electrical outlets. This adapter automatically connects to other TRENDnet Powerline AV adapters with no installation required —TRENDnet recommends pressing the ‘ Sync’ button to automatically change default encryption keys. Use up to 4 adapters to network devices in different rooms without running new cabling. Power Save mode reduces power consumption by up to 70%. Quality of Service technology prioritizes video, audio, & online gaming. LED displays convey device status for easy troubleshooting. Advanced 128-bit AES encryption secures your network. This adapter is ideal to be used in buildings that interfere with wireless networking signals. ...

TRENDnet 4-Port Powerline 500 AV Adapter TRENDnetÂ’s 4-Port Powerline 500 AV Adapter, model TPL-4052E, uses an electrical outlet to create a 500 Mbps powerline network. Two adapters are needed to start a network. Connect network ready TVs, media players, game consoles, & computers to the four Ethernet ports. No CD installation required—encrypted TRENDnet adapters auto-connect out of the box. 500 Mbps powerline networking Connect four devices to the Ethernet ports TRENDnet adapters auto-connect out of the box Pre-encrypted for your security Power Save mode reduces electrical consumption by 80% Ease of Use No CD Installation Simply plug in the adapters—all TRENDnet adapters auto-connect out of the box Cross Compatible Works with all TRENDnet Powerline 500 & 200 adapters Security Pre-Encrypted For your security the adapter arrives pre-encrypted Sync Button Press the Sync button to change existing encryption keys Performance Powerline 500 500 Mbps Powerline networking over existing electrical lines Whole Home Coverage Connects over electrical lines for distances of up to a 5000 square foot home Four Ports Connect up to four devices to the four Ethernet ports Energy Savings Power Save mode reduces electrical consumption by up to 80% * Maximum of 8 adapters (nodes) recommended for streaming video across your network ** 500 Mbps is the maximum physical Powerline data rate. Data throughput may vary by circuit wire condition overheads *** Powerline communication works only single area electric circuit. (Usually controlled by a single power breaker.) **** Power strip, GFCI outlets & AFCI circuit breakers will degrade Powerline network signals. Specifications Standards IEEE 802.3 IEEE 802.3u IEEE 802.3x IEEE 1901/ Home Plug AV Device Interfaces 4 x 10/100 Mbps Ethernet ports Sync button Status LEDs Power prong A: North America Type B (NEMA 5Â-15) EU: Euro Type C (CEE 7/16) UK: United Kingdom Type G (BS 1363) Powerline Data Rate Up to 500 Mbps Powerline Range Up to 300 m over electrical lines Frequency Band 2
- 50 MHz Security 128-Bit AES encryption Compatibility Optional software utility: Windows® 8.1, 8, 7, Vista & XP Special Features Power Save Mode Auto-connects to other TRENDnet Powerline adapters Power Input: 100
- 240 V AC, 50
- 60 Hz Consumption: Active mode: 4 Watts (max.), Standby mode: 0.5 Watts (max.) Operating Temperature 0
- 40 °C (32
- 104 °F) Operating Humidity Max 90% non-condensing Certifications CE FCC Home Plug AV Dimensions A: 105 x 75 x 57 mm (4.1 x 3.0 x 2.2 in.) EU: 105 x 75 x 73 mm (4.1 x 3.0 x 2.87 in.) UK: 105 x 75 x 65 mm (4.1 x 3.0 x 2.56 in.) Weight A: 147 g (5.2 oz) EU: 170 g (6.0 oz) UK: 159 g (5.6 oz) Warranty 3-year limited Package Contents TPL-4052E Quick Installation Guide CD-ROM (Utility & User’s Guide) Network cable (1.5 m/5 ft.)




...

The Powerline 500 AV Nano Adapter Kit with Built-In Outlet, model TPL-407E2K, uses existing electrical lines to create a secure high speed network. Connect the first adapter to your network & plug the second adapter into an outlet on your electrical system for instant high speed network access. The compact form factor saves space & offers an additional electrical outlet, built into the front of the housing to power computers & other devices. A noise filter maintains optimum connection speeds when devices such as computers, televisions, & gaming consoles create electrical background noise. This adapter automatically connects to other TRENDnet Powerline AV adapters with no installation required—TRENDnet recommends pressing the ‘ Sync’ button to automatically change default encryption keys. Use up to 8 adapters to network devices in different rooms without running new cabling. Power Save mode reduces power consumption by up to 80%. Quality of Service technology prioritizes video, audio, & online gaming. LED displays convey device status for easy troubleshooting. Advanced 128-bit AES encryption secures your network. This adapter is ideal to be used in buildings that interfere with wireless networking signals.

Includes:: two TPL-407E adapters Compliant with IEEE 1901 & Home Plug AV standards High speed networking over an existing electrical system 1 x 10/100 Mbps Auto-MDIX Ethernet port 1 x built-in electrical power socket Adapters automatically connect using an encrypted Powerline signal One-touch Sync button changes encryption keys Three LED indicators Power: on/off Powerline Connection: green (best), amber (better), red (good), off (no connection) Ethernet Connection: solid (connection), blinking (activity), off (no connection) Advanced electrical noise filter boosts performance Connect one 500 Mbps Powerline AV Adapter to the Internet & then plug in up to 7 additional 500 Mbps Powerline AV adapters for instant connectivity Share data intensive files, play games, download music & more at faster data transfer rates Advanced 128-bit AES encryption to ensure total network security Support for IPv 6 Supports up to 16 IGMP based IPTV streams Power Save mode reduces electrical consumption by up to 80% Neighbor network support for up to 4 overlapping networks Network signal transmits up to 300 meters (984 ft.) Auto Qo S support through traffic classification & multiple priority queuing Optional management utility compatible with Windows 8.1, 8, 7, Vista & XP 3-year limited warranty

...

TRENDnet’s Powerline 500 AV2 Adapter, model TPL-408E, uses an electrical outlet to create a 500 Mbps Powerline network. No CD installation required—encrypted TRENDnet adapters auto-connect out of the box. Two adapters are needs to start a network. Connect one adapter to a router & plug in another adapter on your electrical system for instant internet access. Ease of Use No CD Installation Simply plug in the adapters—all TRENDnet adapters auto-connect out of the box Cross Compatible TRENDnet Powerline 600, 500, & 200 adapters work with each other Compact Compact form factor saves space around a crowded electrical outlet Security Pre-Encrypted For your security the adapter arrives pre-encrypted Sync Button Press the Sync button to change existing encryption keys Performance Powerline 500 500 Mbps Powerline networking over existing electrical lines Whole Home Coverage Connects over electrical lines for distances of up to a 5000 square foot home (300 m/984 ft.) Energy Savings Power Save mode reduces electrical consumption by up to 80% ...