The PEXUSB3S25 2-Port PCI Express USB (Universal Serial Bus) 3.0 Card lets you add two USB (Universal Serial Bus) 3.0 ports to your PCI Express-enabled computer system, with an optional LP4 power connector to connect to your system power supply & deliver up to 900m A of power per port to USB (Universal Serial Bus) 3.0 bus-powered devices (500m A for USB (Universal Serial Bus) 2.0). Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP is not supported by all operating systems). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details. The PCIe USB (Universal Serial Bus) 3.0 adapter is compliant with USB (Universal Serial Bus) 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB (Universal Serial Bus) 2.0 / 1.1 devices. For added versatility, the controller card is equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. enhanced Performance with UASP UASP is supported in Windows 8, 8.1, Server 2012 & Linux kernel 2.6.37 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance.

...

The PEXUSB3S24 2-Port PCI Express USB (Universal Serial Bus) 3.0 Card lets you add two USB (Universal Serial Bus) 3.0 ports to your PCI Express-enabled computer system, with an optional SATA power connector to connect to your system power supply & deliver up to 900m A of power per port to USB (Universal Serial Bus) 3.0 bus-powered devices (500m A for USB (Universal Serial Bus) 2.0). Enhanced with UASP support (USB Attached SCSI Protocol), this USB (Universal Serial Bus) 3.0 controller performs up to 70% faster than conventional USB (Universal Serial Bus) 3.0 when paired with a UASP supported enclosure (Note: UASP is not supported by all operating systems). Using a more efficient protocol than the traditional USB (Universal Serial Bus) BOT (Bulk-Only Transport), UASP technology optimizes transfers by allowing multiple commands to be processed simultaneously, significantly increasing transfer speeds for less wait time on data transfers. See our UASP test results below for further details. The PCIe USB (Universal Serial Bus) 3.0 adapter is compliant with USB (Universal Serial Bus) 3.0 standards for data transfer speeds up to 5 Gbps, while still offering backward compatibility with existing USB (Universal Serial Bus) 2.0 / 1.1 devices. For added versatility, the controller card is equipped with a standard profile bracket &

Includes:: a low-profile/half-height bracket for installation in small form-factor computers. Backed by a Star Tech.com 2-year warranty & free lifetime technical support. enhanced Performance with UASP UASP is supported in Windows 8, 8.1, Server 2012 & Linux kernel 2.6.37 or later. In testing UASP performed with up to a 70% faster read / 40% faster write speed over traditional USB (Universal Serial Bus) 3.0 at peak performance. Test results were obtained using an Intel Ivy Bridge system, Star Tech.com add-on USB (Universal Serial Bus) 3.0 cards, a UASP-enabled Star Tech.com enclosure, & a SATA III solid state drive. The Star Tech.com Advantage Increase efficiency of your USB (Universal Serial Bus) 3.0 devices with up to 5 Gbps of bandwidth Fits into full or low profile/small form factor (SFF) systems, with a dual profile design Power high-powered USB (Universal Serial Bus) devices as necessary, with the optional SATA power connector

...

The PEXMSATA3422 PCI Express SATA Card helps you improve the overall speed & storage capacity of your computer by giving you multiple 6 Gbps SATA connections for connecting high-performance SSDs (Solid State Drives) & hard drives in a Hyper Duo RAID array. Now, you can easily add two m SATA slots & two SATA III ports to your computer through a single PCIe x 4 slot. Featuring Hyper Duo technology, the SATA card offers SSD auto-tiering which lets you balance the performance advantages of SSD storage with the cost-effectiveness & large capacity of standard hard drives. By combining SSD & HDD drives into a single volume (up to 3 SSD + 1 HDD), Hyper Duo discreetly works in the background to identify & move frequently accessed files to the faster SSD drive (s) for enhanced data throughput – up to 80% of SSD performance! (Note: The Hyper Duo automatic storage tiering feature is compatible with Windows 8, 7, Vista, & XP only) This versatile RAID controller card helps to relieve the internal space constraints often associated with multi-drive configurations by letting you install two m SATA SSDs directly to the card via convenient, latching slots. With dual m SATA slots, as well as two internal SATA ports, the card offers an effective hardware RAID solution, with native RAID (0, 1) support. The PCIe SATA controller also offers Port Multiplier (PM) support, so you can connect multiple SATA drives to just one port, for a total of 7 drives (up to 4 drives through PM on one port, plus a single drive to the other SATA port & two m SATA slots.) ...

Add 2 e SATA ports to your desktop computer through a PCI Express expansion slot Port Multiplier technology supports multi-drive external enclosures over a single e SATA cable at speeds up to 3.0 Gbp Supports hard drives larger than 136GB with 48-bit LBA & a native PCI Express chipset instead of a bridge chip, to ensure fast, reliable operation Backed by a Star Tech.com lifetime warranty & free lifetime technical support This 2 Port PCI Express e SATA Controller Adapter Card offers simple connectivity between a host computer & e SATA devices. Providing two e SATA ports the adapter card offers a cost-effective solution for connecting hot-pluggable, high-speed storage, & in turn allows for easier data backups & archiving. With full support for SATA 300 (SATA II) hard drives & data transfer speeds of up to 3 Gbps, the adapter card features a native PCI Express single chipset that provides enhanced compatibility, reliability & performance for external SATA storage needs. The PCI Express e SATA controller card also features port multiplier capability with comm&-based switching for connecting multiple external hard drives to a host PC or Mac desktop through a single external SATA connection. A dual profile solution, the e SATA controller card

Includes:: a low profile/half-height bracket for adapting to slimline or small form factor system applications. WhatÂ’s in the box e SATA PCI Express Card Low Profile Bracket Installation CD Instruction Manual

...

Add 2 internal SATA 2.0 ports to your desktop computer through a PCI Express expansion slot Adds dual internal SATA ports at speeds up to 3 Gbps for either full or low profile computer systems Supports hard drives larger than 136GB with 48-bit LBA & native PCI Express chipset instead of a bridge chip to ensure fast, reliable operatin Backed by a Star Tech.com lifetime warranty & free lifetime technical support Adds 2 internal SATA II (SATA 300) ports to a computer's PCI Express slot
- This 2 Port PCI Express Internal Serial ATA Controller Card adds two internal SATA II (SATA /300) ports to a computer through simple installation into an available x 1 PCI Express slot. Supporting data transfer speeds of up to 3.0 Gbps, the SATA controller card features Native Command Queuing support to ensure optimum performance. Using a native PCI Express single chipset, the internal SATA controller card provides enhanced compatibility, reliability & performance for your storage needs. The controller card

Includes:: both standard form factor & low profile brackets, allowing you to add SATA capability to virtually any PCI Express enabled computer, regardless of the case form factor WhatÂ’s in the box PCI Express SATA Card Full Profile Bracket Driver CD Instruction Manual


...

Add 2 RS232 serial ports to your standard or small form factor computer through a PCI Express expansion slot 460 Kbps data rates offer efficient serial device performance Installs into standard or small form-factor systems with included brackets Easy to install & use with full step-by-step instructions Add 2 RS232 serial ports to your standard or small form factor computer through a PCI Express expansion slot
- The PEX2S950 2 Port PCI Express RS232 Serial Adapter Card with 16950 UART can be installed into an available PCI Express slot, to provide two high performance 16C950 RS232 serial UART channels/ports
- a convenient solution for connecting modern or legacy serial devices with support for data transfer rates of up to 460 Kbps. The 2 port RS232 serial card is easy to install & configure, with support for a broad range of Windows® operating systems. Plus, the card features IRQ sharing & supports plug & play serial device connections, guaranteeing convenient, hassle-free installation. Backed by a Star Tech.com lifetime warranty & free lifetime technical support. What’s in the box PCI Express Serial Card Low Profile Brackets Driver CD Instruction Manual

...

Providing data transfer speeds up to 10x faster than USB (Universal Serial Bus) 2.0, this PCI Express USB (Universal Serial Bus) 3.0 card enables you to access your data & transfer files faster than ever, by adding one internal USB (Universal Serial Bus) 3.0 port & one external USB (Universal Serial Bus) 3.0 port to your PCI Express-equipped PC. Featuring a native NEC PCI Express host controller chipset, the new USB (Universal Serial Bus) 3.0 standard supports transfer rates of up to 5 Gbps, while still providing connectivity & support for the older USB (Universal Serial Bus) 2.0 (480 Mbps) & 1.1 (12 Mbps) devices. In addition to providing considerably faster transfer rates, the PEXUSB3S11 USB (Universal Serial Bus) 3.0 card draws power from the computer power supply through a SATA style power connector
- a perfect solution for systems that have a limited number of LP4 connectors available. The card will supply 5V, 900m A to the USB (Universal Serial Bus) 3.0 port, allowing more & more external devices to operate without the need of an additional power source. The inclusion of an internal USB (Universal Serial Bus) 3.0 connection provides the added benefit of compatibility to future USB (Universal Serial Bus) 3.0-based internal storage solutions.
...

Add 2 USB (Universal Serial Bus) 3.0 ports to your desktop computer through a PCI Express expansion slot Super Speed USB (Universal Serial Bus) 3.0 connectivity at up to 5 Gbps & 80% more power than USB (Universal Serial Bus) 2.0 Dual profile design to fit into Full or Low Profile/small form factor (SFF) system Backed by a Star Tech.com lifetime warranty & free lifetime technical support Providing speeds up to 10x faster than that of USB (Universal Serial Bus) 2.0, this PCI Express USB (Universal Serial Bus) 3.0 card enables you to access your data & transfer files much faster than USB (Universal Serial Bus) 2.0, by adding two USB (Universal Serial Bus) 3.0 ports to your PCI Express capable PC. Featuring a native NEC PCI Express host controller chipset, the new USB (Universal Serial Bus) 3.0 standard supports transfer rates of up to 5 Gbps, while still providing connectivity & support for the older USB (Universal Serial Bus) 2.0 (480 Mbps) & 1.1 (12 Mbps) devices. In addition to providing a much faster transfer rate the PEXUSB3S2 USB (Universal Serial Bus) 3.0 card also supplies 900m A of power per USB (Universal Serial Bus) port, allowing more & more external devices to operate without the need of an additional power source. WhatÂ’s in the box PCI Express USB (Universal Serial Bus) 3.0 Card LP4 Molex to SATA Adapter Low Profile bracket Installation CD Instruction Manual ...

Add 2 high-speed RS-232 serial ports to your low profile/small form factor computer with a PCI expansion slot Compatible with any PC running Windows®, DOS® or Linux® for simple integration into your application Data transfer rates of up to 115 Kbps for peak serial device performance This 2 Port 16550 Serial Card can be installed in a PCI slot to add two serial ports
- a cost-effective solution for connecting any new serial device or old legacy serial device, with data transfer rates of up to 115.2 Kbps. The serial card features a low profile bracket, suitable for installation in low profile/small form factor computer cases. Perfect for connecting serial modems, POS devices, PDAs, digital cameras, printers, ISDN terminal adapters & more, to your system, the adapter card supports IRQ sharing & operates flawlessly with Windows® 7, Server 2008 R2, Vista, XP, Server 2003, 2000, ME, 98, 95, NT4, 3.1, DOS® & Linux®. The card can be connected in minutes through simple plug & play installation & is backed by Star Tech.com’s lifetime warranty & FREE LIFETIME tech support. What’s in the box PCI Low Profile 2 Port Serial Card Low profile bracket Screws Driver CD Instruction Manual
...

The PCI2S4851050 2-Port PCI Serial Adapter Card (RS422/RS485) with 161050 UART adds two DB9 RS422/RS485 serial ports, using a single PCI expansion slot. The PCI serial card offers a high performance 16C1050 UART & supports both 2-wire & 4-wire RS485 modes. The card delivers an efficient single-chip design & a large 256-byte transit/receive FIFO buffer that work together to provide high-speed serial communication while reducing the overall load on the system CPU. With the included standard & low profile/half-height brackets, this PCI serial expansion card suits a broad range of system form factors, & is a perfect addition for connecting RS422/485 serial devices to a host computer. For added versatility, the RS422/RS485 adapter is able to accommodate 3.3 or 5V PCI/PCI-X slots. ...