The PEX2PECP2 2 Port PCI Express Parallel Adapter Card
- EPP/ECP/SPP/PS2 parallel card adds two IEEE 1284 parallel ports to your
...

This Fire Wire 400 card connects to a computer PCI Express (PCIe) slot to provide two Fire Wire 6-pin Female ports
- making it
...

This Startech 2 port PCI Express SATA 6 Gbps card enables the home PC builder to add two SATA ports through a single PCI express card slot. Through on-board jumper selection the user can select two of the four SATA III ports to set as internal, external or one of each type. This Startech.com card is compatible with SATA 3.0. &, with 6 Gbps, can be used with high performance SSD’s, CD-ROM’s & DVD-ROM’s. With Port Multiplier on each port a single cable can enable multiple drives to be connected. Easy To Install The card fits easily into any system & for mini systems a half height installation bracket is included. Features Two switchable SATA ports SATA Revision 3.0 compatibility Backwards compatible with SATA I & II Supports (SATA) optical drives Port multipliers Half height installation bracket Technical

Specification Warranty Information Warranty 2 Years Hardware Bus Type PCI Express Card Type Standard Profile (LP bracket incl.) Chipset ID ASMEDIA ASM1061 Interface e SATA & SATA Port Style Integrated on Card Ports 2 Connector (s) Connector Type (s) 1
- PCI Express x 1 Male External Ports 2
- e SATA (7 pin; Data) Plug Internal Ports 2
- SATA (7 pin; Data) Plug Performance LBA support 48-bit Port Multiplier Yes RAID No Type & Rate SATA III (6 Gbps) Software OS Compatibility Windows 8 (32/64bit), 7 (32/64), Vista (32/64), XP (32/64), Windows Server 2012, 2008 R2, 2003 (32/64) Physical Characteristics Product Height 20 mm [0.8 in] Product Length 121 mm [4.8 in] Product Weight 44 g [1.6 oz] Product Width 92 mm [3.6 in] Environmental Humidity 5% ~ 85% RH Operating Temperature 0°C to 50°C (32°F to 122°F) Storage Temperature -20°C to 60°C (-4°F to 140°F) Whats in the Box 1
- PCIe SATA Controller 1
- SATA Cable 1
- Low Profile Bracket 1
- Driver CD 1
- Instruction Manual









...

Add more storage to your PC with an Ultra ATA/133 drive controller card from Star Tech.com. The PCIIDE2 features two IDE drive ports with data transfer rates of up to 133 MBytes/sec. The card can act as the primary boot device & replace built-in IDE ports, or provide an additional 2 high-speed ports to the system. Designed to perform with high-speed IDE/133 drives, the PCIIDE2 also supports 100 MBytes/sec hard drives, 66 MBytes/sec hard drives, 33 MBytes/sec hard drives, CD-ROMS, CDRW drives, & other ATA peripherals. Bus-Master drivers are included for DOS, Windows 95/98/ME/NT 4/2000/XP & Vista. ...

A space-efficient, reliable & cost-effective KVM switch for multi-PC users, Star Tech.coms SV211K is designed for call center, help desk & SOHO environments for integrating enterprise computer systems together. The SV211K is a computer management tool that means that you can control multiple computers from one source minimizing downtime by making connected computers & input devices available as soon as they are attached. A ready-to-use, out-of-the-box solution, the SV211K 2-port KVM switch kit comes complete with two reliable Star Tech.com 3-in-1 cables to remove tangles & help organize your workspace. Cable ports are located at the rear of the SV211K providing easy, no-nonsense cable identification & organization. Ports are switched by pressing a button on the unit, or by entering a simple keyboard hot-key sequence. The Star View prevents boot-up errors by providing keyboard & mouse emulation to the non-selected PC. Its low cost, super small footprint design, & high 1920x 1440 resolution display capability make this switch perfect for any application where reliability & cost-effectiveness are a necessity.

Includes:: two (2) 6 ft. cables. Hot plug
- computers can be added without resetting switches or other connected computers. All cables come out of the rear of the switch unlike competitor 3-sided "octopus" designs.


...

Add 2 RS232 serial ports with 5V or 12V selectable power output to your computer through a PCI Express slot. The PEX2S952PW 2-Port PCI Express Serial Card (with Power Output) turns a PCI Express slot into 2 RS232 (DB9) serial connections & enables compatible devices to draw power from the serial ports. Suitable for many RS232-powered serial applications, this PCIe serial card offers a selectable 5V or 12V power option capable of power output using pin 1, 4, 8 or 9, allowing you to configure the card to suit the requirements of your powered RS232 devices. A flexible solution for adding serial ports to small form factor or full-sized systems, the 2-port serial card

Includes:: both low & full profile brackets. To ensure maximum performance, the serial card is based on a native single chip design, that means that you can harness the full capability of PCI Express (PCIe)
- providing optimum reliability & speed while reducing the load applied to the CPU by as much as 48% over conventional (bridge chip) serial cards.


...

Take the blazing speed of Serial ATA outside your case with an external slot plate from Star Tech.com. The ESATAPLATE2 adds external data support to any existing Serial ATA controller. This product is designed to take advantage of the increased data integrity provided by external hard drives or RAID devices that support ESATA connections. You'll get up to 300 MBytes/sec of reliable data transfer for your Serial ATA peripherals, like external storage devices. Installation is easy: just install the plate into an open I/O slot on your computer & connect the cables to two Serial ATA connectors on your motherboard or controller card. The slim SATA data cable provides less clutter for increased airflow inside your case. ...

This 2 Port PS/2 KVM Switch is a reliable computer management tool that means that you can control multiple computers from one source, minimizing downtime by making connected computers & input devices available as soon as they are attached. This sturdy PS/2 KVM Switch features an all-metal, 1U chassis that adds to the unit's reliability & dependability. The PS/2 KVM switch is designed to work with Dell, Compaq, IBM & HP servers, all PC notebook computers, & Compaq Alpha systems, & supports resolutions of up to 1920x 1440
- ensuring a smooth & broadly compatible operating experience.
...

The SV231TDVIUA 2-Port Triple Monitor DVI USB (Universal Serial Bus) KVM Switch allows 2 PCs (each with 3 DVI video outputs) to share monitors, 1 microphone & set of speakers, 1 keyboard & 1 mouse, as well as an additional USB (Universal Serial Bus) 2.0 peripheral such as an external hard drive, thumb drive, printer, or webcam. The Triple DVI KVM switch enables you to switch back & forth between 2 multi DVI PCs at the touch of a button, while maintaining professional-level video quality on all monitors at resolutions up to 1920x 1200. The triple monitor DVI switch also features an integrated USB (Universal Serial Bus) hub port which allows USB (Universal Serial Bus) 2.0 peripherals to be shared between attached systems, eliminating duplicate peripheral costs & offering the convenience of sharing stored data between PCs. The SV231TDVIUA 2-Port Triple Head DVI KVM Switch is backed by a Star Tech.com 3-year warranty & free lifetime technical support. PLEASE NOTE: While both DVI-I (analog mode) & DVI-D (digital only) are supported by the KVM, both source PCs must output the same signal type for proper switching. It is recommended, wherever possible, to use DVI-D cables across all PC to KVM & KVM to Console connections. If necessary, please contact our technical support team for assistance identifying your source. ...

Add 2 external USB (Universal Serial Bus) 3.0 ports from a single USB (Universal Serial Bus) connection. The ST2300CUSB3 2-Port Super Speed USB (Universal Serial Bus) 3.0 Hub is a compact solution for expanding the USB (Universal Serial Bus) capability of your computer, by turning a single USB (Universal Serial Bus) 3.0 port into 2 USB (Universal Serial Bus) 3.0 ports
- the perfect companion for laptops/netbooks that only offer a limited number of USB (Universal Serial Bus) ports. The USB (Universal Serial Bus) hub supports USB (Universal Serial Bus) 3.0 data bandwidth (5 Gbps
- up to 10x more than USB (Universal Serial Bus) 2.0) & is backward compatible with USB (Universal Serial Bus) 2.0 & 1.1/1.0 devices, ensuring flawless performance from all of your USB (Universal Serial Bus) peripherals/devices, regardless of their age. Ideal for travelers who require portability, the USB (Universal Serial Bus) 3.0 hub features a compact design with a built-in cable, making it easy to carry, with no additional cables or accessories needed for setup.

...