Increase equipment availability & productivity with rapid-response onsite & remote support for your HPE hardware, as well as selected multivendor equipment. This flexible HPE Care Pack Service covers desktops, workstations, servers, storage systems, network & printing equipment. Choose 4-hour same business day hardware support when you need to extend your hardware warranty coverage with prompt service for key systems & devices; obtain easy-to-buy, easy-to-use onsite services; improve hardware performance & uptime; increase the return on your HPE & multivendor hardware investments; enjoy consistent service coverage across geographically dispersed sites. ...

The HPE LTO-5 Ultrium 3000 represents HPE's LTO tape drive technology capable while providing enterprise tape drive monitoring & management capabilities with HPE Tape Assure & AES 256-bit hardware data encryption easy-to-enable security to protect the most sensitive data & prevent unauthorized access of tape cartridges. HPE LTO Ultrium half-height drive is designed for server customers in direct attached storage (DAS) environments where hard disk & system bottlenecks can impede data transfer rates. The Ultrium 3000 provides investment protection with full read.
- Large-capacity drive of compressed storage on a single cartridge, requiring fewer data cartridges to meet storage needs, significantly reducing IT costs.
- AES 256-bit data encryption & support for WORM media provide a secure method for long-term retention of critical data records.
- HPE Tape Assure provides life & health information, utilization & operational performance for media & drives. HPE Library & Tape Tools (LTT) helps with installation, management, performance optimization, & troubleshooting.
- High capacity combined with low media cost delivers an exceptionally low cost of ownership & ensures a faster return on investment.
- HPE One-Button Disaster Recovery (OBDR) makes it possible to quickly restore an entire system using a single tape cartridge in the event of a disaster. DEVICE TYPE - TAPE LIBRARY DRIVE MODULE
- LTO ULTRIUM RECORDING STANDARD - LTO ULTRIUM 5 ENCLOSURE TYPE - INTERNAL INTERFACE TYPE - 8GB FIBRE CHANNEL STORAGE REMOVABLE
- LTO ULTRIUM
- 5.25" X 1/2H STORAGE REMOVABLE CAPACITY
- 1.5 TB (NATIVE) / 3 TB (COMPRESSED) SUPPORTED TAPE CARTRIDGES (READ & WRITE)
- ULTRIUM 4, ULTRIUM 5 DATA TRANSFER RATE (NATIVE)
- 140 MBPS (504 GBPH ) DATA TRANSFER RATE (COMPRESSED)
- 280 MBPS (1 TBPH )











...

The HPE Storage Works MSL2024 Tape Library is the ideal entry-level tape library that provides tape library capacity & extensive tape library features in the compact form of a tape autoloader. With compressed capacity (2:1) of up to 38.4TB using HP Storage Works LTO-4 Ultrium Tape Drive technology, the MSL2024 Tape Library can easily tackle backup & recovery jobs typically handled by midrange tape libraries. Utilizing a 2U form factor, the tape library provides a large amount of data storage without consuming a large amount of valuable rack space. The unique HPE web-based management feature reduces the dependencies on local IT resources, allowing multiple sites to be supported centrally. The MSL2024 Tape Library offers customers the choice of purchasing a library equipped with HPE Storage Works LTO Ultrium Tape Drives which include LTO-4 Ultrium 1840, LTO-4 Ultrium 1760, LTO-3 Ultrium 960, LTO-3 Ultrium 920 & LTO-2 Ultrium 448. The LTO-4 Ultrium configurations provide encryption support. The MSL2024 Tape Library is available with SCSI, SAS or Fiber Channel (FC) interfaces. If only one LTO-4 Ultrium 1760, LTO-3 Ultrium 920 or LTO-2 Ultrium 448 Tape Drive is selected, a second drive of that type can be added later as backup needs increase. Each library

Includes:: two removable 12-slot magazines, & one user-configurable mail slot dedicated for import/export of data cartridges. A barcode reader is part of the standard configuration for facilitating media management. All HPE Storage Works MSL2024 Tape Library units arrive rack-ready for installation in a standard 19" rack, but can be converted into a tabletop configuration for use outside of a rack.

...

The HPE NC364m is a HP Blade System c-Class network adapter providing four Gigabit Ethernet ports on a single card saving valuable server mezzanine slots for other purposes. The x 4 PCI Express NC364m is supported on Integrity & Pro Liant c-Class server blades in all mezzanine slots. For Integrity, it is the first network adapter mezzanine option available providing up to 16 Gigabit Ethernet ports per BL860c server, 128 ports per c 7000 enclosure. For Pro Liant, the NC364m is the second quad-port adapter option for c-Class allowing Pro Liant customers a choice between an adapter that uses either an Intel or Broadcom controller. The NC364m is ideal for virtualization, security, server consolidation, network segmentation, & other server applications requiring maximum throughput & port density. The total aggregate throughput of 4 Gbps also meets the needs for customers desiring high bandwidth but are not yet ready to move to 10 Gigabit Ethernet. Please note: server components such as memory & power supplies must match those already installed in a server. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HPE NC365T 4-port Ethernet server adapter is a four lanes (x 4) PCI Express (PCIe) high performing single-chip, low-power quad port adapter. The NC365T is PCIe Gen 2.0 compliant adapter that supports TCP checksum & segmentation, Large Send & Receive offload capability, Message Signal Interrupt Extension (MSI-X), IEEE 1588, Receive Side Scaling (RSS), VLAN tagging, 9.5KB jumbo frames & IPv 6. The NC365T ships with support for an advanced server virtualization feature called Virtual Machine Data queue (VMDq), which improves I/O performance by reducing I/O overhead in a virtualized environment. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Serial Attached SCSI (SAS) provides a superior storage solution. With some storage requirements escalating & others becoming more complex, factors such as flexibility, performance, increased reliability, greater density, security, scalability & accessibility are more critical than ever. SAS Midline hard drives are ideal for servers or external storage for high-capacity, non mission-critical environments with less than 40% workloads requiring economical reliability (about twice that of entry drives) & redundant data paths to the drive, e.g. disk backup, archival, reference, & other highly available applications. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

The HPE PDU Management Module enables you to monitor & manage power environments through comprehensive control of individual HPE PDUs. The management module can be configured to send alert traps to HPE Systems Insight Manager & other SNMP management programs or used as a standalone management system. This flexibility enables you to monitor & manage with up to two PDUs through the network connector or serial connector located on the front of the management module. To facilitate day-to-day maintenance tasks, the embedded management software provides detailed system logs. The HPE PDU Management Module provides remote management of a PDU by connecting the PDU directly to the network. Configuration & Management of the PDU from anywhere & at anytime via a standard web browser. ...

HP Flexible Slot Power Supplies provide up to 94% power efficiency with 80 Plus Platinum-certified power supplies that lower server power requirements & reduce power waste in your data center. Flex Slot Power Supplies have a form factor that is 25% smaller than previous generation power supplies, providing more space to add additional server options & improve the performance of your servers. Flex Slot Power Supplies provide fast, tool-less hot plug access to server power supplies for greater serviceability & are supported across the entire Pro Liant DL300 Gen 9 Server family, simplifying your spares strategy & further reducing data center costs ...

Information technology professionals rely on HPE quality to ensure maximum productivity. As the power of applications, processors, memory adapters & storage devices increases, high-end computer users are seeking ways to optimize their system performance. HPE provides leading solutions, adding new levels of performance, availability, flexibility, & management. Please note: networking components such as switches, routers, UPS & wireless devices require that speeds & standards be consistent throughout the network to gain optimum performance. To avoid compatibility clashes or for advice, please contact us on solutions@ebuyer.com. ...

Provide more robust & reliable data transfer, due to their lower sensitivity to sharp bends, which can reduce downtime & operating expense. Fiber optic cable routing can result in 90° bends, cables caught in cabinet doors & kinks. Data loss & transmission errors resulting from these common problems are difficult to troubleshoot, expensive, & increase downtime. HPE Premier Flex bendable fiber optic cables solve these problems by providing up to 10 times better bend performance than existing fiber cables. HPE's Premier Flex cables use a bendable fiber technology that significantly improves bend performance over existing fiber cables. This, combined with improvements in fiber clarity & bandwidth, allows HPE Premier Flex cables to transmit data over longer distances, at higher rates, with fewer transmission errors. ...